REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS

Available format(s)

Hardcopy

Published date

30-06-2019

Publisher

British Standards Institution

Provides to the design, erection and verification of electrical installations.

Committee	JPEL/64
DevelopmentNote	NEW CHILD AMD 1 2020 IS ADDED
DocumentType	Standard
ISBN	978 1 785 61170 4
Pages	576
ProductNote	NEW CHILD AMD 1 2020 IS ADDED
PublisherName	British Standards Institution
Status	Current
Supersedes	BS 7671:2008+A3:2015

BS 476-4:1970	Fire tests on building materials and structures Non-combustibility test for materials
HD 60364-5-53:2015/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
BS EN 62305-1:2011	Protection against lightning General principles
HD 60364-7-702:2010	Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains
BS 546:1950	Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors
BS EN 50085-2-1 : 2006	CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-1: CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING ON WALLS AND CEILINGS
BS EN 60898-1 : 2003	ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION
IEC 60038:2009	IEC standard voltages
BS IEC 61000-5.2 : 1997
BS EN 62353:2014	Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
BS EN 61534-21:2014	Powertrack systems Particular requirements for powertrack systems intended for wall and ceiling mounting
BS EN 62040-3:2011	Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
IEC 61936-1:2010+AMD1:2014 CSV	Power installations exceeding 1 kV a.c. - Part 1: Common rules
BS EN 62196-2:2017	Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
BS EN 50174-2 : 2009	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 61241-17:2005	Electrical apparatus for use in the presence of combustible dust Inspection and maintenance of electrical installations in hazardous areas (other than mines)
BS EN 61184 : 2008	BAYONET LAMPHOLDERS (IEC 61184:2017)
BS EN 61558-2-5:2010	Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units
BS EN 60598-2-23:1997	Luminaires. Particular requirements Extra low voltage lighting systems for filament lamps
BS EN 50086-1:1994	Specification for conduit systems for cable management General requirements
BS EN ISO 11446:2004	Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13-pole connectors for vehicles with 12 V nominal supply voltage
BS EN 60269-1 : 2007	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
BS 88-3(2010) : 2010 COR 2014	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
BS EN 61558-2-8:2010	Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for bells and chimes
HD 60364-4-443:2016	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching
HD 60364-4-43:2010	Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
BS EN 61034-2 : 2005	MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS PART 2: TEST PROCEDURE AND REQUIREMENTS
BS EN 61386-1:2008	Conduit systems for cable management General requirements
BS EN 50428 : 2005	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
BS EN 61643-21 : 2001	LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS
BS EN 60445:2010	Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors
BS EN 60598-2-13 : 2006	LUMINAIRES - PART 2-13: PARTICULAR REQUIREMENTS - GROUND RECESSED LUMINAIRES (IEC 60598-2-13:2006)
BS EN 60335-2-53:2011	Household and similar electrical appliances. Safety Particular requirements for sauna heating appliances and infrared cabins
BS EN 50525-3-21:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables with special fire performance. Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
BS EN 50085-2-3:2010	Cable trunking systems and cable ducting systems for electrical installations Particular requirements for slotted cable trunking systems intended for installation in cabinets
BS EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS EN 61558-2-4:2009	Safety of transformers, reactors,power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
HD 60364-7-709:2009/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
BS 5266-1:2011	Emergency lighting Code of practice for the emergency escape lighting of premises
BS EN 61386-22 : 2004	CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 22: PARTICULAR REQUIREMENTS - PLIABLE CONDUIT SYSTEMS
BS EN 60447:2004	Basic and safety principles for man-machine interface, marking and identification. Actuating principles
BS EN 50565-1:2014	Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U<sub>0</sub>/U) General guidance
BS EN 60446:2007	Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or alphanumerics
BS EN 61386-24:2010	Conduit systems for cable management Particular requirements. Conduit systems buried underground
HD 60364-7-721:2009/corrigendum:2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS
BS EN 61347-2-13 : 2014	LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2014)
BS EN 60204-1 : 2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 61851-1:2011	Electric vehicle conductive charging system General requirements
BS EN 60038:2011	CENELEC standard voltages
IEC 60331-2:2009	Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
BS EN 60309-1 : 1999	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
HD 60364-7-705:2007/A12:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES
BS EN 50281-1-1:1999	Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing
BS EN 61557-2:2007	Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation resistance
BS EN 50174-3 : 2013	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
BS EN 60669-2-3:2006	Switches for household and similar fixed electrical installations Particular requirements. Time delay switches (TDS)
BS EN 50200:2015	Method of test for resistance to fire of unprotected small cables for use in emergency circuits
HD 60364-4-42 : 2011 AMD 1 2015	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014)
BS EN 61558-2-1:2007	Safety of power transformers, power supplies, reactors and similar products Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
BS EN 60947-7-2:2009	Low-voltage switchgear and controlgear Ancillary equipment. Protective conductor terminal blocks for copper conductors
BS 1363-2(1995) : 1995	13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS
BS EN 60721-3-4:1995	Classification of environmental conditions. Classification of groups of environmental parameters and their severities Stationary use at non-weatherprotected locations
BS 5839-1:2013	Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
IEC 60502-1:2004+AMD1:2009 CSV	Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV)
BS EN 50085-1 : 2005	CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
BS EN 60898-2:2006	Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c and d.c. operation
BS EN 61140 : 2002	PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
BS EN 60332-1-2 : 2004	TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004)
BS 196:1961	Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts
BS EN 61241-14:2004	Electrical apparatus for use in the presence of combustible dust Selection and installation
BS EN 60598-2-24:2013	Luminaires Particular requirements. Luminaires with limited surface temperatures
BS EN 50362:2003	Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
BS 5803-5:1985	Thermal insulation for use in pitched roof spaces in dwellings Specification for installation of man-made mineral fibre and cellulose fibre insulation
BS IEC 60287-1-1 : 2006	ELECTRIC CABLES - CALCULATION OF THE CURRENT RATING - PART 1-1: CURRENT RATING EQUATIONS (100% LOAD FACTOR) AND CALCULATION OF LOSSES - GENERAL
BS EN 61534-1 : 2011	POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 60255-22-1:2008	Measuring relays and protection equipment Electrical disturbance tests. 1 MHz burst immunity tests
BS 8491:2008	Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems
HD 60364-4-41:2017/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
BS EN 50085-2-4:2009	Cable trunking systems and cable ducting systems for electrical installations Particular requirements for service poles and service posts
HD 60364-5-54:2011/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
BS EN 61241-10:2004	Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present
BS EN 61439-1:2011	Low-voltage switchgear and controlgear assemblies General rules
BS EN 50281-2-1:1999	Electrical apparatus for use in the presence of combustible dust. Test methods Methods of determining minimum ignition temperatures
BS EN 61537:2007	Cable management. Cable tray systems and cable ladder systems
BS EN 61386-21 : 2004	CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 21: PARTICULAR REQUIREMENTS - RIGID CONDUIT SYSTEMS
BS EN 60228:2005	Conductors of insulated cables
BS EN 61215:2005	Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 50525-2-11:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750V (U0/U) Cables for general applications. Flexible cables with thermoplastic PVC insulation
BS EN 62305-2:2012	Protection against lightning Risk management
BS EN 1648-2:2012	Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations Motor caravans
BS EN 61439-4:2013	Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS)
BS EN 60702-2 : 2002	MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS
BS EN 62262:2002	Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS 4573(1970) : 1970	SPECIFICATION FOR 2-PIN REVERSIBLE PLUGS AND SHAVER SOCKET-OUTLETS
BS 6220:1983	Specification for junction boxes for use in electrical installations with rated voltages not exceeding 250 V
HD 384.7.711 : 200S1	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
BS EN 60079-10-1:2015	Explosive atmospheres Classification of areas. Explosive gas atmospheres
BS EN 62305-3:2011	Protection against lightning Physical damage to structures and life hazard
BS EN 62208:2011	Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
BS 8573:2012	Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire
BS EN 12954:2001	Cathodic protection of buried or immersed metallic structures. General principles and application for pipelines
BS 7769-1.2:1994	Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses Sheath eddy current loss factors for two circuits in flat formation
BS EN 50086-2-1:1996	Specification for conduit systems for cable management. Particular requirements Rigid conduit systems
HD 472 S1:1989/AC:2013	NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS
BS EN 50086-2-3:1996	Specification for conduit systems for cable management. Particular requirements Flexible conduit systems
BS EN 60598-1:2015	Luminaires General requirements and tests
BS EN 50522:2010	Earthing of power installations exceeding 1 kV a.c.
HD 60364-7-714:2012	Low-voltage electrical installations - Part 7-714: Requirements for special installations or locations - External lighting installations
BS EN 81-1 : 1998	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
HD 60364-5-51:2009/A12:2017	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
BS EN 60439-1:1999	Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies
BS EN 1648-1:2012	Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations Caravans
BS EN 61439-6:2012	Low-voltage switchgear and controlgear assemblies Busbar trunking systems (busways)
BS EN 50525-2-21:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Flexible cables with crosslinked elastomeric insulation
BS EN 61095:1993	Specification for electromechanical contactors for household and similar purposes
BS EN 60079-10-2:2015	Explosive atmospheres Classification of areas. Explosive dust atmospheres
BS EN 60079-14:2014	Explosive atmospheres Electrical installations design, selection and erection
BS EN 60947-7-1:2009	Low-voltage switchgear and controlgear Ancillary equipment. Terminal blocks for copper conductors
BS EN 60309-2 : 1999	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES
HD 60364-4-442:2012	Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
HD 60364-4-444:2010/AC:2012	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES
BS 559:2009	Specification for the design and construction of signs for publicity, decorative and general purposes
IEC TS 62081:1999	Arc welding equipment - Installation and use
BS EN 60904-3:2008	Photovoltaic devices Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
HD 60364-7-701:2007/A12:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-701: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - LOCATIONS CONTAINING A BATH OR SHOWER
BS 7769-3.1:1997	Electric cables. Calculation of the current rating. Sections on operating conditions Reference operating conditions and selection of cable type
BS EN 50086-2-4:1994	Specification for conduit systems for cable management. Particular requirements Conduit systems buried underground
HD 60364-5-559:2012/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS
HD 60364-7-706:2007	Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement
HD 60364-5-534:2016	Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages
HD 60364-7-722:2016	Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles
BS EN 60309-4 : 2007	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLETS AND CONNECTORS WITH OR WITHOUT INTERLOCK (IEC 60309-4:2006, MODIFIED)
BS EN 62395-1:2013	Electrical resistance trace heating systems for industrial and commercial applications General and testing requirements
BS EN 50525-3-41:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables with special fire performance. Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke
BS 3036:1958	Specification. Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth)
HD 60364-5-557:2013/A11:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS
BS EN 60079-17:2014	Explosive atmospheres Electrical installations inspection and maintenance
HD 60364-1:2008/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
BS EN 60950-1 : 2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
PD 6536:1992	Extra-low voltage (ELV). Limit values
HD 308 S2:2001	Identification of cores in cables and flexible cords
BS EN 60269-2:1995	Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
BS EN 60146-2:2000	Semiconductor convertors. General requirements and line commutated convertors Self-commutated semiconductor converters including direct d.c. converters
BS 6346:1997	Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
BS 1363-1(1995) : 1995	13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
BS 7769-1.1:1997	Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses General
BS EN 60670-1 : 2005	BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
BS EN 61347-1:2015	Lamp controlgear General and safety requirements
IEC 60364-4-44:2007+AMD1:2015 CSV	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
BS EN 60947-6-1:2005	Low-voltage switchgear and controlgear Multiple function equipment. Transfer switching equipment
BS EN 60947-2:2017	Low-voltage switchgear and controlgear Circuit-breakers
BS EN 60669-2-4:2005	Switches for household and similar fixed electrical installations Particular requirements - Isolating switches
BS EN 60947-3 : 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
BS 8450:2006	Code of practice for installation of electrical and electronic equipment in ships
BS 1363-4(1995) : 1995	13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED
BS EN 14505:2005	Cathodic protection of complex structures
BS EN 60947-5-1 : 2004	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN 50107-1:2002	Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV General requirements
BS EN 60947-6-2:2003	Low-voltage switchgear and controlgear Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
BS 8519:2010	Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications. Code of practice
HD 60364-7-712:2016	Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
BS EN 61558-2-23:2001	Safety of power transformers, power supply units and similar Particular requirements for transformers for construction sites
BS EN 61557-9:2015	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Equipment for insulation fault location in IT systems
BS EN 61558-2-15:2012	Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for isolating transformers for the supply of medical locations
BS EN 62020:1999	Electrical accessories. Residual current monitors for household and similar uses (RCMs)
BS EN 50438:2013	Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks
BS EN 61048 : 2006	AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS
BS 3676:1963	Specification for switches for domestic and similar purposes (for fixed or portable mounting)
BS EN 61535 : 2009	INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS
HD 60364-7-710:2012/AC:2013	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-710: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MEDICAL LOCATIONS
BS EN 50525-2-31:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Single core non-sheathed cables with thermoplastic PVC insulation
IEC 60974-9:2010	Arc welding equipment - Part 9: Installation and use
BS EN 50281-1-2:1999	Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Selection, installation and maintenance
PD CLC/TR 50480:2011	Determination of cross-sectional area of conductors and selection of protective devices
BS EN 62423:2012	Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
BS 646(1958) : 1958	SPECIFICATION FOR CARTRIDGE FUSE-LINKS (RATED UP TO 5 AMPERES) FOR A.C. AND D.C. SERVICE
BS EN 60570:2003	Electrical supply track systems for luminaires
BS 88-2.2:1988	Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application) Additional requirements for fuses with fuse-links for bolted connections
HD 60364-7-715:2012/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS
HD 60364-5-551:2010/A11:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS
CLC/TS 61643-12 : 2009	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES
BS EN 61643-11 : 2012	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
BS 7919:2001	Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
BS EN 60947-4-1 : 2010	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
BS EN 60598-2-18 : 1994	LUMINAIRES - PART 2-18: PARTICULAR REQUIREMENTS - LUMINAIRES FOR SWIMMING POOLS AND SIMILAR APPLICATIONS
BS AU 149a:1980	Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal)
BS EN 60702-1 : 2002	MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES
IEC 60331-1:2009	Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
BS EN 50107-2:2005	Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV Requirements for earth-leakage and open-circuit protective devices
BS EN 60335-2-71:2003	Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals
IEC 60800:2009	Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
BS 476-12:1991	Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement
BS EN ISO 13174:2012	Cathodic protection of harbour installations
BS EN 50525-3-11:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables with special fire performance. Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke
HD 60364-7-729:2009/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-729: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - OPERATING OR MAINTENANCE GANGWAYS
BS EN 60998-2-1:2004	Connecting devices for low-voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screw-type clamping units
BS EN 60335-2-96 : 2002	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING
BS EN 1838:2013	Lighting applications. Emergency lighting
BS 3535:1962	Specification for safety isolating transformers for industrial and domestic purposes
BS EN 50525-2-51:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation
BS EN 60335-2-41 : 2003	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
BS 7909:2011	Code of practice for temporary electrical systems for entertainment and related purposes
BS EN 62040-1 : 2008	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS
BS EN 60669-2-1 : 2004	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
BS EN 50525-2-82:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Cables with crosslinked elastomeric insulation for decorative chains
BS EN 60721-3-3:1995	Classification of environmental conditions. Classification of groups of environmental parameters and their severities Stationary use at weatherprotected locations
BS EN 61557-8:2015	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation monitoring devices for IT systems
BS EN 62305-4:2011	Protection against lightning Electrical and electronic systems within structures
BS 8488(2009) : 2009	PREFABRICATED WIRING SYSTEMS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS - SPECIFICATION
BS EN 61558-2-6:2009	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
BS EN 61995-1:2008	Devices for the connection of luminaires for household and similar purposes General requirements
BS EN 50174-1 : 2009	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE
BS EN 50525-2-12:2011	Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Cables with thermoplastic PVC insulation for extensible leads
BS EN 13636:2004	Cathodic protection of buried metallic tanks and related piping
BS HD 60269-3 : 2010	LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
HD 60364-7-703:2005	Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters
BS 7889:2012	Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations
BS EN 60623:2017	Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells
BS EN 60998-2-2:2004	Connecting devices for low voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screwless-type clamping units
BS EN 60335-2-76 : 2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS
HD 60364-7-717:2010/AC:2014	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
BS EN 60669-1 : 2000	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
HD 60364-7-740:2006/A11:2017	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
BS 88-6:1988	Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuses of compact dimensions for use in 240/415 V a.c. industrial and commercial electrical installations
BS 7698-12:1998	Reciprocating internal combustion engine driven alternating current generating sets Emergency power supply to safety devices
BS EN 50086-2-2:1996	Specification for conduit systems for cable management. Particular requirements Pliable conduit systems - pliable conduit systems
BS EN 60068-2-11:1999	Environmental testing. Test methods Tests. Test KA. Salt mist
BS EN 61008-1 : 2012	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED)
BS EN 61347-2-2:2012	Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
BS EN 61557-6:1998	Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring ormonitoring of protective measures Residual current devices (RCD) in TT, TN and IT systems
BS EN 60238 : 2004	EDISON SCREW LAMPHOLDERS
BS EN 60269-3:1995	BS Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
BS AU 177a:1980	Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)
BS 7769-2.2:1997	Electric cables. Calculation of the current rating. Thermal resistance A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
BS EN 61009-1 : 2012	RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES
BS EN 60335-2-29 : 2004	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
CLC/TS 61643-22:2016	Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles
IEC 60331-3:2009	Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
BS EN 61386-23 : 2004	CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 23: PARTICULAR REQUIREMENTS - FLEXIBLE CONDUIT SYSTEMS
BS 6217:1981	Guide to graphical symbols for use on electrical equipment
HD 60364-7-708:2017	Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
BS 4177:1992	Specification for cooker control units
BS 1362:1973	Specification for general purpose fuse links for domestic and similar purposes (primarily for use in plugs)
IEC 60364-5-52:2009	Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
BS EN 60335-1 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
BS EN 60073:2002	Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators
BS EN 60092-507:2015	Electrical installations in ships Small vessels
BS HD 60269-2:2013	Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
BS EN ISO 12696:2016	Cathodic protection of steel in concrete
BS EN 50310:2016	Telecommunications bonding networks for buildings and other structures
BS EN 61558-1 : 2005	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS