BS 8002:2015
Current
The latest, up-to-date edition.
Code of practice for earth retaining structures
Hardcopy , PDF
English
30-06-2015
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General rules
5 Gravity retaining walls
6 Semi-gravity retaining walls
7 Embedded retaining walls
8 Cofferdams, basements, and strutted excavations
Annexes
Annex A (normative) - Deadman anchors
Annex B (informative) - Specific formations
Bibliography
Provides recommendations for the design and construction of earth retaining structures to support ground at slopes steeper than the ground would naturally assume.
This British Standard gives recommendations for the design and construction of earth retaining structures to support ground at slopes steeper than the ground would naturally assume. It provides non-contradictory, complementary information for use in conjunction with BSEN1997 and its UK National Annex.
Clause4 gives general recommendations for the design and construction of all types of earth retaining structures; Clause5, Clause6, and Clause7 give specific recommendations for the design and construction of gravity walls, semi-gravity walls, and embedded walls (respectively); and Clause8 gives specific recommendations for the design and construction of cofferdams, basements, and strutted excavations.
Annex A gives specific recommendations for the design and construction of deadman anchors.
Annex B gives information about specific geological formations encountered in the UK.
NOTE1 This standard does not cover the design and construction of anchors (other than deadman anchors), for which see BS8081.
NOTE2 This standard does not cover the design and construction of earthworks, for which see BS6031.
NOTE3 This standard does not cover the design and construction of foundations, for which see BS8004.
NOTE4 This standard does not cover the design and construction of maritime works, for which see BS6349.
NOTE5 This standard does not cover the design and construction of earth retaining structures constructed using strengthened or reinforced soil walls, for which see BS8006.
| Committee |
B/526
|
| DevelopmentNote |
Together with BS EN 1997-1, it supersedes BS 8002(1994). Supersedes 15/30301518 DC. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
104
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| BS EN 1991-2 NA : 2003 | UK NATIONAL ANNEX TO EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES |
| BS EN 771-5 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 5: MANUFACTURED STONE MASONRY UNITS |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| BS EN 12666-1 : 2005 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| BS EN 771-3 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES) |
| BS EN 13369:2013 | Common rules for precast concrete products |
| BS 5481:1977 | Specification for unplasticized PVC pipe and fittings for gravity sewers |
| BS EN 335:2013 | Durability of wood and wood-based products. Use classes: definitions, application to solid wood and wood-based products |
| BS 8006-1(2010) : 2010 | CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS AND OTHER FILLS |
| BS EN 771-4 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS |
| BS EN ISO 14688-1 : 2002 | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 1: IDENTIFICATION AND DESCRIPTION |
| BS EN 1997-2:2007 | Eurocode 7. Geotechnical design Ground investigation and testing |
| PD 6694-1:2011 | Recommendations for the design of structures subject to traffic loading to BS EN 1997-1:2004 |
| BS EN 460:1994 | Durability of wood and wood-based products. Natural durability of solid wood. Guide to the durability requirements for wood to be used in hazard classes |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| BS EN 1991-1-1 NA : 2002 | UK NATIONAL ANNEX TO EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| BS EN 1996-3:2006 | Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures |
| BS EN 15258:2008 | Precast concrete products. Retaining wall elements |
| BS EN 1916:2002 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
| BS EN 1993-1-1 NA : 2005 | UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| BS 4449(2005) : 2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - BAR, COIL AND DECOILED PRODUCT - SPECIFICATION |
| BS EN 10244-2:2009 | Steel wire and wire products. Non-ferrous metallic coatings on steel wire Zinc or zinc alloy coatings |
| BS EN 771-2 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS |
| BS EN 10218-1:2012 | Steel wire and wire products. General Test methods |
| BS EN 13670:2009 | Execution of concrete structures |
| BS ISO 5667-11:2009 | Water quality. Sampling Guidance on sampling of groundwaters |
| BS EN 1536 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| BS EN 1997-1 NA : 2004 | UK NATIONAL ANNEX TO EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| BS EN 14199:2015 | Execution of special geotechnical works. Micropiles |
| BS EN 10245-2:2011 | Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
| BS 8006-2(2011) : 2011 | CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS - PART 2: SOIL NAIL DESIGN |
| BS 8215:1991 | Code of practice for design and installation of damp-proof courses in masonry construction |
| BS 4729(2005) : 2005 | CLAY BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS |
| BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 351-1:2007 | Durability of wood and wood-based products. Preservative-treated solid wood Classification of preservative penetration and retention |
| BS EN 335-2:2006 | Durability of wood and wood-based products. Definition of use classes Application to solid wood |
| BS 5975(2008) : 2008 | CODE OF PRACTICE FOR TEMPORARY WORKS PROCEDURES AND THE PERMISSIBLE STRESS DESIGN OF FALSEWORK |
| BS EN 1997-1 : 2004 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| BS EN 335-1:2006 | Durabiltity of wood and wood-based products. Definitions of use classes General |
| BS EN ISO 14689-1:2003 | Geotechnical investigation and testing. Identification and classification of rock. Identification and description |
| BS 8500-2(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS EN 1538 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DIAPHRAGM WALLS |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| BS EN 350-2:1994 | Durability of wood and wood-based products. Natural durability of solid wood Guide to natural durability and treatability of selected wood species of importance in Europe |
| BS EN ISO 14688-2 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PRINCIPLES FOR A CLASSIFICATION |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS EN 10218-2:2012 | Steel wire and wire products. General Wire dimensions and tolerances |
| BS EN 1852-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system |
| PD 6484:1979 | Commentary on corrosion at bimetallic contacts and its alleviation |
| BS 5837:2012 | Trees in relation to design, demolition and construction. Recommendations |
| BS EN 845-1 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| BS EN 10245-3:2011 | Steel wire and wire products. Organic coatings on steel wire PE coated wire |
| BS 6349-1-3:2012 | Maritime works General. Code of practice for geotechnical design |
| BS EN 1990:2002+A1:2005 | Eurocode. Basis of structural design |
| BS EN 335-3:1996 | Hazard classes of wood and wood-based products against biological attack Application to wood-based panels |
| BS 10175(2011) : 2011 | INVESTIGATION OF POTENTIALLY CONTAMINATED SITES - CODE OF PRACTICE |
| BS EN 1993-5 NA : 2009 | UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| BS EN 771-1 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| BS EN 771-6 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| BS EN 12063:1999 | Execution of special geotechnical work. Sheet pile walls |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.