BS 8500-2(2006) : 2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE
Hardcopy , PDF
30-04-2015
English
01-01-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Complementary requirements for constituent materials
5 Complementary basic requirements for concrete
6 Designated concrete
7 Designed concrete
8 Prescribed concrete
9 Standardized prescribed concrete
10 Proprietary concrete
11 Delivery of fresh concrete
12 Conformity testing and conformity criteria
13 Production control
14 Transport of concrete
Annexes
Annex A (normative) - Conformity procedure for
combinations
Annex B (normative) - Test method for determining
the composition of RCA and RA
Annex C (informative) - Example of the conformity
procedure given in Annex A
Annex D (informative) - Minimizing the risk of damaging
alkali-silica reaction in concrete
Bibliography
Index
Describes constituent materials and concrete.
Committee |
B/517/1
|
DevelopmentNote |
Supersedes BS 8500-2(2002) and 06/30133679 DC. To be used in conjunction with BS EN 206-1. (11/2006) 2006 Edition Re-Issued in October 2012 & incorporates AMD 1 2012. Supersedes 11/30241319 DC. (10/2012)
|
DocumentType |
Standard
|
Pages |
52
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
EN 13670:2009 | Execution of concrete structures |
BS 5911-5(2004) : 2004 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 5: SPECIFICATION FOR PRESTRESSED NON-PRESSURE PIPES AND FITTINGS WITH FLEXIBLE JOINTS |
BS 5502-31(1995) : 1995 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 31: GUIDE TO THE STORAGE AND HANDLING OF WASTE |
CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
PD CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
BS 8500-1(2006) : 2006 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER |
BS 8204-3(2004) : 2004 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 3: POLYMER MODIFIED CEMENTITIOUS LEVELLING SCREEDS AND WEARING SCREEDS - CODE OF PRACTICE |
PD 6687-1:2010 | Background paper to the National Annexes to BS EN 1992-1 and BS EN 1992-3 |
BS 5911-6(2004) : 2004 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 6: SPECIFICATION FOR ROAD GULLIES AND GULLY COVER SLABS |
BS PD6682-1(2009) : 2009 | AGGREGATES - PART 1: AGGREGATES FOR CONCRETE - GUIDANCE ON THE USE OF BS EN 12620 |
BS 5911-4(2002) : 2002 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 4: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE INSPECTION CHAMBERS |
BS 8204-1(2003) : 2003 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENTITIOUS LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE |
BS EN 14647:2005 | Calcium aluminate cement. Composition, specifications and conformity criteria |
BS 8103-1:2011 | Structural design of low-rise buildings Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing |
EN 14647:2005/AC:2006 | CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
BS 7543:2015 | Guide to durability of buildings and building elements, products and components |
BS 5502-22(2003) : 2003 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
BS PAS 68(2013) : 2013 | IMPACT TEST SPECIFICATIONS FOR VEHICLE SECURITY BARRIER SYSTEMS |
BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
BS 8110-1:1997 | STRUCTURAL USE OF CONCRETE - PART 1: CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION |
BS 8204-6(2008) : 2008 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 6: SYNTHETIC RESIN FLOORINGS - CODE OF PRACTICE |
BS PAS 68(2010) : 2010 | IMPACT TEST SPECIFICATIONS FOR VEHICLE SECURITY BARRIERS |
BS 1881-122:2011 | Testing concrete Method for determination of water absorption |
BS EN 13670:2009 | Execution of concrete structures |
BS 8204-2(2003) : 2003 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
BS EN 480-1:2014 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and reference mortar for testing |
BS EN 480-11:2005 | Admixtures for concrete, mortar and grout. Test methods Determination of air void characteristics in hardened concrete |
BS EN 12350-6:2009 | Testing fresh concrete Density |
BS EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates Determination of drying shrinkage |
BS 812-104:1994 | Testing aggregates Method for qualitative and quantitative petrographic examination of aggregates |
BS EN 196-2:2013 | Method of testing cement Chemical analysis of cement |
BS EN ISO 9001:2015 | Quality management systems. Requirements |
BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
BS EN 12390-7:2009 | Testing hardened concrete Density of hardened concrete |
BS EN 15167-1:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Definitions, specifications and conformity criteria |
BS 6068-2.42:1993 | Water quality. Physical, chemical and biochemical methods Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry |
BS EN 1008:2002 | Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
BS 1704:1985 | Specification for solid-stem general purpose thermometers |
BS 8000-2.1:1990 | Workmanship on building sites. Code of practice for concrete work Mixing and transporting concrete |
BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
BS EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates Determination of loose bulk density and voids |
BS EN 450-1:2012 | Fly ash for concrete Definition, specifications and conformity criteria |
BS EN 12620:2013 | Aggregates for concrete |
BS EN 480-12:2005 | Admixtures for concrete, mortar and grout. Test methods Determination of the alkali content of admixtures |
BS 6068-2.43:1993 | Water quality. Physical, chemical and biochemical methods Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry |
BS EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
BS EN 14216:2015 | Cement. Composition, specifications and conformity criteria for very low heat special cements |
BS EN 933-2:1996 | Tests for geometrical properties of aggregates Determination of particle size distribution. Test sieves, nominal size of apertures |
BS EN 932-1:1997 | Tests for general properties of aggregates Methods for sampling |
BS 6068-2.44:1993 | Water quality. Physical, chemical and biochemical methods Determination of sodium and potassium: determination of sodium and potassium by flame emission spectrometry |
BS 1881-129:2011 | Testing concrete Method for determination of density of partially compacted semi-dry fresh concrete |
BS EN 1744-1 : 2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
BS EN 932-5:2012 | Tests for general properties of aggregates Common equipment and calibration |
BS EN 196-7:2007 | Methods of testing cement Methods of taking and preparing samples of cement |
BS EN 934-2 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 2: CONCRETE ADMIXTURES - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
BS EN 13263-1 : 2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
BS 7943:1999 | Guide to the interpretation of petrographical examinations for alkali-silica reactivity |
BS 1881-124:1988 | Testing concrete Methods for analysis of hardened concrete |
BS EN 196-1:2016 | Methods of testing cement Determination of strength |
BS EN 12390-2:2009 | Testing hardened concrete Making and curing specimens for strength tests |
BS EN 480-10:2009 | Admixtures for concrete, mortar and grout. Test methods Determination of water soluble chloride content |
BS 812-123:1999 | Testing aggregates Method for determination of alkali-silica reactivity. Concrete prism method |
BS 4027:1996 | Specification for sulfate-resisting Portland cement |
BS 6068-2.37:1990 | Water quality. Physical, chemical and biochemical methods Method for the determination of chloride via a silver nitrate titration with chromate indicator (Mohr\'s method) |
BS 7979:2001 | Specification for limestone fines for use with Portland cement |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.