BS 891-1:1962
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Method for Rockwell hardness test Testing of metals
Hardcopy , PDF
23-07-2013
English
01-08-1964
Test requirements and procedure using scales A to K inclusive; minimum thickness of test pieces, accuracy of hardness measurements.
Committee |
ISE/101
|
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 4 : LATEST | Similar to |
AS B84.1-1967 | Identical |
BS 3696-1:1977 | Specification for master gears Spur and helical gears (metric module) |
BS 5770-4:1981 | Steel strip intended for the manufacture of springs Specification for martensitic and austenitic stainless steel |
BS 3606:1978 | Specification for steel tubes for heat exchangers |
BS 906-2:1972 | Specification for engineers\' parallels. Imperial units |
BS A 300:1989 | Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads |
BS 4190:1967 | Specification for ISO metric black hexagon bolts, screws and nuts |
BS 2559-4:1973 | Specification for screwdrivers Ratchet screwdrivers |
BS 5770-2:1981 | Steel strip intended for the manufacture of springs Specification for cold rolled carbon and low alloy steel |
BS 5595-2:1981 | Interchangeable magnetic twelve-disk pack for information processing Specification for 200 Mbytes magnetic twelve-disk pack |
BS 4L 101:1990 | Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings |
DEFSTAN 95-5/2(1987) : 1987 | INSPECTION OF WROUGHT STEEL FOR STRESSED APPLICATIONS |
BS 6104-3:1981 | Mechanical properties of fasteners Specification for set screws and similar threaded fasteners not under tensile stresses |
BS 5577:1984 | Specification for table cutlery |
BS 6101-1:1981 | Machine tool ball screws Methods of calculating dynamic and static load and life ratings |
BS 4551:1980 | Methods of testing mortars, screeds and plasters |
BS 4825-3:1976 | Specification. Stainless steel pipes and fittings for the food industry. Clamp type couplings |
BS 1673-10:1977 | Methods of test for raw rubber and unvulcanized compounded rubber. Measurement of prevulcanizing and curing characteristics by means of curemeters |
BS 4825-4:1977 | Specification for stainless steel pipes and fittings for the food industry Screwed type couplings |
BS SP 166:1982 | Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series) |
BS 1881-120:1983 | Testing concrete Method for determination of the compressive strength of concrete cores |
BS 7201-1:1989 | Hydraulic fluid power. Gas loaded accumulators Specification for seamless steel accumulator bodies above 0.5 L water capacity |
BS 3531-5.2:1990 | Implants for osteosynthesis. Bone screws and auxiliary equipment Specification for screwdrivers for screws having heads with single slot, cruciate slot or cross-recess |
BS 1943:1989 | Specification for woodworking chisels and gouges |
BS 192:1982 | Specification for open-ended wrenches |
BS 4882:1990 | Specification for bolting for flanges and pressure containing purposes |
BS 4437:1987 | Method for determining hardenability of steel by end quenching (Jominy test) |
BS 1429:1980 | Specification for annealed round steel wire for general engineering springs |
BS 5045-1:1982 | Transportable gas containers Specification for seamless steel gas containers above 0.5 litre water capacity |
BS 3692:1967 | Specification for ISO metric precision hexagon bolts, screws and nuts. Metric units |
BS 876:1995 | Specification for hand hammers |
BS 970-1:1983 | Specification for wrought steels for mechanical and allied engineering purposes General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
BS 6105:1981 | Specification for corrosion-resistant stainless steel fasteners |
BS 5045-6:1987 | Transportable gas containers Specification for seamless containers of less than 0.5 litre water capacity |
BS 970-4:1970 | Specification for wrought steels for mechanical and allied engineering purposes Valve steels |
BS 4395-2:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts and nuts and general grade washers |
BS 426:1969 | Specification for fixed centres for use on machine tools and in other applications |
BS 4A 4:1966 | Test pieces and test methods for metallic materials for aircraft. Metric units |
BS 4929-2:1973 | Specification for steel hexagon prevailing-torque type nuts Unified (inch) series |
BS 6333:1983 | Specification for adjustable wrenches |
BS 1881-109:1983 | Testing concrete Method for making test beams from fresh concrete |
BS A 299:1989 | Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads |
BS A 298:1988 | Methods of test for self-locking nuts with maximum operating temperature greater than 425°C |
BS 3537:1979 | Specification for gudgeon pins up to 200 mm diameter |
BS 1881-110:1983 | Testing concrete Method for making test cylinders from fresh concrete |
BS 3962-6:1980 | Methods of test for finishes for wooden furniture Assessment of resistance to mechanical damage |
BS 5600-4.5:1979 | Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals Rockwell hardness test (scale A) |
BS 436-3:1986 | Spur and helical gears Method for calculation of contact and root bending stress limitations for metallic involute gears |
BS 235:1987 | Specification for gears for electric traction |
DEFSTAN 51-11(PT33)/1(1988) : INTERIM | HAND TOOLS, GENERAL PURPOSE PART 33: PUNCHES, DRIVE PIN, AND CENTRE SOLID |
BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
BS 6813:1987 | Specification for trade cutlery for use with food |
BS 5194-4:1985 | Surgical instruments Specification for scissors, shears and other jointed cutting instruments |
BS 2559-1:1971 | Specification for screwdrivers Screwdrivers for slotted head screws |
BS 5045-3:1984 | Transportable gas containers Specification for seamless aluminium alloy gas containers above 0.5 litre water capacity and up to 300 bar charged pressure at 15°C |
BS 3HR 100:1978 | Procedure for inspection and testing of wrought heat-resisting alloys |
BS 6104-2:1983 | Mechanical properties of fasteners Specification for nuts with specified proof load values |
BS HC 100:1972 | Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings |
BS 3388:1973 | Specification for forks, shovels and spades |
BS AU 142:1968 | Methods of test for brake linings materials |
BS 4395-3:1973 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Higher grade bolts (waisted shank), nuts and general grade washers |
BS 4550-3.4:1978 | Methods of testing cement. Physical tests Strength tests |
BS 5770-3:1981 | Steel strip intended for the manufacture of springs Specification for pre-hardened and tempered carbon steel |
BS 5194-3:1985 | Surgical instruments Specification for dissecting forceps |
BS 1254:1981 | Specification for WC seats (plastics) |
BS 6104-1:1981 | Mechanical properties of fasteners Specification for bolts, screws and studs |
BS 5194-2:1989 | Surgical instruments Specification for instruments with pivot joints (excluding cutting instruments) |
BS 3673-3:1968 | Specification for spring retaining rings Carbon steel C clips |
BS 4933:1973 | Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts |
BS 5770-1:1981 | Steel strip intended for the manufacture of springs Specification for hot rolled carbon and low alloy steel |
BS 5194-2:1985 | Surgical instruments Specification for instruments with pivot joints (excluding cutting instruments) |
BS 876:1981 | Specification for hand hammers |
BS 906-1:1972 | Specification for engineers\' parallels Metric units |
BS 5861:1980 | Specification for rear-mounted power take-offs on agricultural tractors |
BS 3673-4:1977 | Specification for spring retaining rings Carbon steel circlips - metric series |
BS 4929-1:1973 | Specification for steel hexagon prevailing-torque type nuts Metric series |
BS 3623:1981 | Specification for woodworkers\' metal-bodied planes |
BS 1449-1:1983 | Steel plate, sheet and strip. Specification for carbon and carbon-manganese plate, sheet and strip |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.