Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 12392:2016

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
Available format(s)

Hardcopy , PDF

Withdrawn date

14-10-2022

Language(s)

English

Published date

31-03-2016

This European Standard specifies the material requirements and testing procedures applicable to wrought and cast aluminium and aluminium alloys intended for use in the production of pressure equipment.

This European Standard covers:

  • the products forms, grades and tempers of wrought and cast aluminium and aluminium alloys which may be used for such applications together with data for wrought and cast alloys over their permissible working temperature ranges;

  • the permissible alloys/ tempers covered by this are those given in Table A.1 and in B.1 for wrought alloys and in Table A.2 and in B.2 for castings;

  • the technical conditions for inspection and delivery, mechanical property limits and tolerances on form and dimensions by reference to the appropriate European standards for the relevant wrought and cast aluminium and aluminium alloys, and

  • additional requirements which are specific to pressure equipment applications.

It applies to hot-rolled plate, cold-rolled sheet/ strip/ circles, extruded or extruded and cold drawn rod/bar, tube, extruded open / hollow profiles, forgings and castings, by this standard are those given in Table A.1 for wrought alloys and in Table A.2 for castings.

It is the sole objective of this standard to cover materials only for pressure purposes and it excludes any elements of fabrication or fabrication methods for pressure equipment; such information can be found in the relevant standards listed in the “Bibliography?? section.

Committee
NFE/35
DevelopmentNote
Supersedes 96/706364 DC. (08/2005) Supersedes 14/30301152 DC. (03/2016)
DocumentType
Standard
Pages
84
PublisherName
British Standards Institution
Status
Withdrawn
Supersedes

Standards Relationship
ONORM EN 12392 : 2016 Identical
NBN EN 12392 : 2016 Identical
NS EN 12392 : 2000 Identical
UNI EN 12392 : 2001 Identical
NEN EN 12392 : 2016 Identical
UNE-EN 12392:2017 Identical
SN EN 12392 : 2016 Identical
I.S. EN 12392:2016 Identical
EN 12392:2016 Identical
DIN EN 12392:2016-08 Identical
NF EN 12392 : 2016 Identical

BS PD5500(2015) : 2015 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2009) : 2009 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
PD 5500:2003 Specification for unfired fusion welded pressure vessels
BS PD5500(2018) : 2018 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2006) : 2006 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2012) : 2012 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS

ASTM B 234M : 2017 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
EN 13957:2008 Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification
EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
ISO 8496:2013 Metallic materials Tube Ring tensile test
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
EN ISO 8493 : 2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
EN 754-3:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 754-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
EN 755-5:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
EN 13445-5 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
EN 4050-3 : 2012 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 3: REFERENCE BLOCKS
EN 485-4:1993 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
EN ISO 8495:2013 Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)
EN 755-3:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
EN ISO 8496:2013 Metallic materials - Tube - Ring tensile test (ISO 8496:2013)
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 4050-4:2012 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 4: ACCEPTANCE CRITERIA
EN 755-8:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
EN 755-4:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN 4050-1 : 2012 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS
ISO 8493:1998 Metallic materials Tube Drift-expanding test
EN 586-3:2001 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
EN 755-7:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
EN 12020-2:2016/AC:2017 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM
EN 13445-8 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
EN 754-6:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
ISO 3452-1:2013 Non-destructive testing Penetrant testing Part 1: General principles
EN 755-6:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form
EN 12258-1:2012 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
EN 1779:1999/A1:2003 NON-DESTRUCTIVE TESTING - LEAK TESTING - CRITERIA FOR METHOD AND TECHNIQUE SELECTION
EN 1370:2011 Founding - Examination of surface condition
EN 1706:2010 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
EN 1371-1:2011 Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
EN 13958:2008 Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 2101 : 1991 AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS
EN 941:2014 Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications
EN 754-5:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
ISO 8495:2013 Metallic materials Tube Ring-expanding test
EN 10204:2004 Metallic products - Types of inspection documents
EN 586-1:1997 Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery
EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
ISO 8492:2013 Metallic materials Tube Flattening test
EN 12681 : 2003 FOUNDING - RADIOGRAPHIC EXAMINATION
EN 754-2:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
EN ISO 8492:2013 Metallic materials - Tube - Flattening test (ISO 8492:2013)
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
EN 14361:2004 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
EN 1559-4:2015 Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
EN 4050-2 : 2012 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 2: PERFORMANCE OF TEST
EN 754-4:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
EN 12020-1:2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
ASTM E 215 : 2016 : REDLINE Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube

View more information
$615.68
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more