BS EN 12878:2014
Current
Current
The latest, up-to-date edition.
Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
30-04-2014
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Assessment and verification of constancy
of performance - AVCP
Annex A (informative) - Further information regarding
test methods
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Regulation
Bibliography
Describes the requirements and the methods of test for pigments for use in the colouring of building materials based on cement and cement/lime combinations.
This European Standard specifies the requirements and the methods of test for pigments for use in the colouring of building materials based on cement and cement/lime combinations.
Pigments covered by this European Standard may also be used in pure lime mortar. For this application, see EN 459-1 and EN 459-2.
Pigments for this purpose may be single pigments, blends of pigments, or blends of pigments and extenders, in powder or granular form, or aqueous preparations.
Pigments typically belong to one of the following classes of compounds:
synthetic or natural oxides and hydroxides of iron;
oxides of chromium, titanium and manganese;
complex inorganic pigments, for example combinations of the above mentioned metal oxides and hydroxides with cobalt, aluminium, nickel and antimony oxides and hydroxides;
ultramarine pigments;
phthalocyanine blue and green;
elemental carbon (shall be regarded as an inorganic pigment);
blends of the above materials (which may also include extenders).
| Committee |
W/-
|
| DevelopmentNote |
Supersedes 97/122338 DC (03/2005) Supersedes 03/319412 DC. (06/2005) Supersedes 12/30256100 DC. (04/2014)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 12878:2007 | Identical |
| NEN EN 12878 : 2014 | Identical |
| SN EN 12878:2014 | Identical |
| UNI EN 12878 : 2014 | Identical |
| DIN EN 12878:2014-07 | Identical |
| NBN EN 12878 : 2014 | Identical |
| I.S. EN 12878:2014 | Identical |
| NF EN 12878 : 2014 | Identical |
| EN 12878:2014 | Identical |
| NS EN 12878 : 2014 | Identical |
| DIN EN 12878:1999-09 | Identical |
| 06/30139515 DC : DRAFT MAY 2006 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL FENCES |
| BS EN 1996-1-1 NA : 2005 | UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| 06/30140171 DC : DRAFT APR 2006 | BS 8481 - DESIGN, PREPARATION AND APPLICATION OF INTERNAL GYPSUM, CEMENT, CEMENT AND LIME PLASTERING SYSTEMS - SPECIFICATION |
| 01/102327 DC : DRAFT MAR 2001 | BS 8500-3 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 3: REQUIREMENTS FOR DESIGNATED CONCRETES |
| BS 8006-1(2010) : 2010 | CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS AND OTHER FILLS |
| BS 8204-3(2004) : 2004 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 3: POLYMER MODIFIED CEMENTITIOUS LEVELLING SCREEDS AND WEARING SCREEDS - CODE OF PRACTICE |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 8204-2(2003) : 2003 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE |
| BS 8297:2017 | Design, manufacture and installation of architectural precast concrete cladding. Code of practice |
| BS 8204-2:2002 | Screeds, bases and in-situ floorings Concrete wearing surfaces. Code of practice |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 1722-14:2006 | Fences Specification for open mesh steel panel fences |
| BS 8204-4(2004) : 2004 | SCREEDS, BASES AND IN SITU FLOORINGS - PART 4: CEMENTITIOUS TERRAZZO WEARING SURFACES - CODE OF PRACTICE |
| BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| 13/30260276 DC : 0 | BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| 04/30126043 DC : DRAFT DEC 2004 | BS 5628-1 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 1: STRUCTURAL USE OF UNREINFORCED MASONRY |
| 13/30260274 DC : 0 | BS 5642-1:1978/A1 - SILLS AND COPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 8298-1:2010 | Code of practice for the design and installation of natural stone cladding and lining General |
| BS 8481:2006 | Design, preparation and application of internal gypsum, cement, cement and lime plastering systems. Specification |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 5385-5:2009 | Wall and floor tiling Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice |
| BS 5328-1:1997 | Concrete Guide to specifying concrete |
| BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| BS 5628-3:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
| BS 5628-1:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 1: STRUCTURAL USE OF UNREINFORCED MASONRY |
| BS 1722-11(2006) : 2006 | FENCES - PART 11: SPECIFICATION FOR PREFABRICATED WOOD PANEL FENCES |
| 04/30055999 DC : DRAFT APR 2004 | BS 8204-4 - SCREEDS, BASES AND IN SITU FLOORINGS - PART 4: CEMENTITIOUS TERRAZZO WEARING SURFACES - CODE OF PRACTICE |
| PD 6678:2005 | Guide to the specification of masonry mortar |
| 06/30139509 DC : DRAFT MAY 2006 | BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH |
| 08/30140557 DC : DRAFT JULY 2008 | BS 8298-3 - CODE OF PRACTICE FOR THE DESIGN AND INSTALLATION OF NATURAL STONE CLADDING AND LINING - PART 3: STONE-FACED PRE-CAST CONCRETE CLADDING SYSTEMS |
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS PAS 8820(2016) : 2016 | CONSTRUCTION MATERIALS - ALKALI-ACTIVATED CEMENTITIOUS MATERIAL AND CONCRETE - SPECIFICATION |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| 14/30291598 DC : 0 | BS 8500-2 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| 04/30055996 DC : DRAFT FEB 2004 | BS 8204-3 - SCREEDS, BASES AND IN SITU FLOORINGS - PART 3: POLYMER MODIFIED CEMENTITIOUS LEVELLING SCREEDS AND WEARING SCREEDS - CODE OF PRACTICE |
| 07/30043554 DC : 0 | BS 5385-5 - WALL AND FLOOR TILING - PART 5: DESIGN AND INSTALLATION OF TERRAZZO, NATURAL STONE AND AGGLOMERATED STONE TILES AND SLABS - CODE OF PRACTICE |
| 17/30342957 DC : 0 | BS 8297 - DESIGN, MANUFACTURE AND INSTALLATION OF ARCHITECTURAL PRECAST CONCRETE CLADDING - CODE OF PRACTICE |
| 07/19983222 DC : 0 | BS 8298-1 - CODE OF PRACTICE FOR THE DESIGN AND INSTALLATION OF NATURAL STONE CLADDING AND LINING - PART 1: GENERAL |
| 03/312994 DC : DRAFT SEP 2003 | BS 8204-2 - SCREEDS, BASES AND IN SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| 02/105033 DC : DRAFT AUG 2002 | BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| BS 8500-2(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 8500-2:2002 | Concrete. Complementary British Standard to BS EN 206-1 Specification for constituent materials and concrete |
| BS 8500-2(2006) : 2006 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 1722-2:2006 | Fences Specification for strained wire and wire mesh netting fences |
| EN ISO 787-9:1995 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 9: DETERMINATION OF PH VALUE OF AN AQUEOUS SUSPENSION |
| EN 934-1:2008 | Admixtures for concrete, mortar and grout - Part 1: Common requirements |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 459-2:2010 | Building lime - Part 2: Test methods |
| EN ISO 1158:1998 | Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998) |
| EN ISO 11664-4:2011 | Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008) |
| ISO 11664-4:2008 | Colorimetry Part 4: CIE 1976 L*a*b* Colour space |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| EN 459-1:2015 | BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| ISO 787-7:2009 | General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure |
| EN ISO 591-1 : 2000 | TITANIUM DIOXIDE PIGMENTS FOR PAINTS - PART 1: SPECIFICATIONS AND METHODS OF TEST |
| ISO 788:1974 | Ultramarine pigments for paints |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 787-9:1981 | General methods of test for pigments and extenders Part 9: Determination of pH value of an aqueous suspension |
| ISO 591-1:2000 | Titanium dioxide pigments for paints Part 1: Specifications and methods of test |
| EN ISO 787-3 : 2000 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 3: DETERMINATION OF MATTER SOLUBLE IN WATER - HOT EXTRACTION METHOD |
| ISO 1158:1998 | Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content |
| ISO 787-3:2000 | General methods of test for pigments and extenders Part 3: Determination of matter soluble in water Hot extraction method |
| ISO 1248:2006 | Iron oxide pigments Specifications and methods of test |
| EN ISO 787-7 : 2009 | ISO 787-7:2009 specifies a general method of test for determining the residue on sieve from a sample of pigment or extender dispersed in water. |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 4621:1986 | Chrome oxide green pigments — Specifications and methods of test |
| ISO 787-13:2002 | General methods of test for pigments and extenders Part 13: Determination of water-soluble sulfates, chlorides and nitrates |
| EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
| EN ISO 787-13:2002 | General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulfates, chlorides and nitrates (ISO 787-13:2002) |
| ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption — BET method |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| EN ISO 1248:2008/AC:2009 | IRON OXIDE PIGMENTS - SPECIFICATIONS AND METHODS OF TEST |
$478.43
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.