Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 13369:2013

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Common rules for precast concrete products
Available format(s)

Hardcopy , PDF

Superseded date

16-05-2018

Language(s)

English

Published date

30-04-2013

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Evaluation of conformity
7 Marking
8 Technical documentation
Annex A (informative) - Concrete cover as
        regard to corrosion
Annex B (informative) - Concrete quality control
Annex C (informative) - Reliability considerations
Annex D (normative) - Inspection schemes
Annex E (informative) - Assessment of compliance
Annex F - This annex does not exist
Annex G (normative) - Test of water absorption
Annex H (informative) - Shape correlation factor for cores
Annex I - This annex does not exist
Annex J (informative) - Measurement of dimensions
Annex K (informative) - Prestressing losses
Annex L (informative) - This annex does not exist
Annex M (informative) - Technical documentation
Annex N (informative) - Properties of indented
        bars and wire
Annex O (informative) - Resistance to fire:
        recommendations for the use
        of EN 1992-1-2
Annex P (informative) - Survey of type testing
Annex Q (informative) - Use of reclaimed
        crushed and recycled coarse aggregates
        in concrete
Bibliography

Describes the requirements, the basic performance criteria and the evaluation of conformity for unreinforced, reinforced and prestressed precast concrete products made of compact light-, normal- and heavyweight concrete according to EN 206-1 with no appreciable amount of entrapped air other than entrained air.

This European Standard specifies the requirements, the basic performance criteria and the evaluation of conformity for unreinforced, reinforced and prestressed precast concrete products made of compact light-, normal- and heavyweight concrete according to EN 206-1 with no appreciable amount of entrapped air other than entrained air. Concrete containing fibres for other than mechanical properties steel, polymer or other fibres is also covered. It does not cover prefabricated reinforced components of lightweight aggregate concrete with open structure.

It may also be used to specify products for which there is no standard. Not all of the requirements (Clause 4) of this standard are relevant to all precast concrete products.

If a specific product standard exists, it takes precedence over this standard.

The precast concrete products dealt with in this standard are factory produced for building and civil engineering works. This standard may also be applied to products manufactured in temporary plants on site if the production is protected against adverse weather conditions and controlled following Clause 6 provisions.

The analysis and design of precast concrete products is not within the scope of this standard but it does offer, for non-seismic zones, information about:

  • the choice of partial safety factors defined by the pertinent Eurocode;

  • the definition of some requirements for prestressed concrete products.

Committee
B/524
DevelopmentNote
Supersedes 98/109224 DC. (09/2001) Supersedes 10/30218985 DC. (05/2013)
DocumentType
Standard
Pages
80
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
NS EN 13369 : 2013 Identical
NBN EN 13369 : 2013 Identical
DIN EN 13369:2013-08 Identical
I.S. EN 13369:2013 Identical
UNE-EN 13369:2013 Identical
NF EN 13369 : 2013 Identical
ONORM EN 13369 : 2013 Identical
UNI EN 13369 : 2013 Identical
SN EN 13369 : 2013 Identical
NEN EN 13369 : 2018 Identical
EN 13369:2018 Identical

BS 8500-1(2015) : 2015 CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER
BS 8297:2017 Design, manufacture and installation of architectural precast concrete cladding. Code of practice
BS 8002:2015 Code of practice for earth retaining structures
17/30342957 DC : 0 BS 8297 - DESIGN, MANUFACTURE AND INSTALLATION OF ARCHITECTURAL PRECAST CONCRETE CLADDING - CODE OF PRACTICE
15/30301520 DC : 0 BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004)
BS PAS 8820(2016) : 2016 CONSTRUCTION MATERIALS - ALKALI-ACTIVATED CEMENTITIOUS MATERIAL AND CONCRETE - SPECIFICATION
BS PAS 8810(2016) : 2016 TUNNEL DESIGN - DESIGN OF CONCRETE SEGMENTAL TUNNEL LININGS - CODE OF PRACTICE
14/30291596 DC : 0 BS 8500-1 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER

EN 12390-3:2009/AC:2011 TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
ISO 3951-1:2013 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
CEN/TR 15728:2016 Design and use of inserts for lifting and handling of precast concrete elements
ISO 717-2:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation
ISO 7873:1993 Control charts for arithmetic average with warning limits
EN 12390-7:2009 Testing hardened concrete - Part 7: Density of hardened concrete
EN 1934:1998 Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
PREN 10138-2 : DRAFT 2000 PRESTRESSING STEELS - PART 2: WIRE
EN ISO 717-2:2013 Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013)
CEN/TR 15739:2008 Precast concrete products - Concrete finishes - Identification
PREN 10138-3 : DRAFT 2000 PRESTRESSING STEELS - PART 3: STRAND
EN ISO 8990:1996 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994)
EN 1745:2012 Masonry and masonry products - Methods for determining thermal properties
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 12504-2:2012 TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
EN ISO 6946:2017 Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12)
EN 12354-1:2000 Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms
ASTM C 173/C173M : 2016 : REDLINE Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 12620:2002+A1:2008 Aggregates for concrete
EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
EN 12390-1:2012 TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 12390-2:2009 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
ISO 9001:2015 Quality management systems — Requirements
ISO 7870-4:2011 Control charts Part 4: Cumulative sum charts
EN 16192:2011 Characterization of waste - Analysis of eluates
EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
ISO 7976-1:1989 Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments
ISO 717-1:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
EN 206-9:2010 Concrete - Part 9: Additional Rules for Self-compacting Concrete (SCC)
EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 12390-6:2009 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
PREN 10138-4 : DRAFT 2000 PRESTRESSING STEELS - PART 4: BARS
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 12350-7:2009 Testing fresh concrete - Part 7: Air content - Pressure methods
ISO 6946:2017 Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods
EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
ISO 8990:1994 Thermal insulation — Determination of steady-state thermal transmission properties — Calibrated and guarded hot box
ISO 1803:1997 Building construction Tolerances Expression of dimensional accuracy Principles and terminology
EN 13670:2009 Execution of concrete structures
EN 12354-2:2000 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components

View more information
$615.68
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more