Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Castings

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-10-2006

Publisher

British Standards Institution

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Requirements
   5.1 Production and manufacturing processes
   5.2 Quality assurance
   5.3 Chemical composition and tempers
   5.4 Mechanical properties of castings
        5.4.1 Mechanical properties of castings under
              static loading
        5.4.2 Mechanical properties of castings under
              cyclic loading
   5.5 Properties of welded joints
   5.6 Internal defects
   5.7 Surface imperfections
   5.8 Finishing welding
   5.9 Tolerances on dimensions and form
6 Qualification procedures
   6.1 First-off article approval procedure
   6.2 Additional qualification procedure
7 Sampling and test methods
   7.1 General
   7.2 Analysis of chemical composition
   7.3 Tensile test
   7.4 Preparation of test pieces for the testing of
        welded joints
   7.5 Tensile testing on welded joints
   7.6 Fatigue testing
   7.7 Visual inspection
   7.8 Dye penetrant testing
   7.9 X-ray examination
   7.10 Measurement of dimensions
8 Traceability
9 Marking of products
10 Inspection certificate
11 Record keeping
12 Packaging
13 Application and use
14 Complaints of non-conformity
Annex A (normative) Chemical composition and mechanical properties
        of EN AC-AIZn10Si8Mg
Annex B (informative) Guidelines for application and use
      B.1 Selection of alloys
      B.2 Fatigue Design
      B.3 Welding
Bibliography

Defines requirements for castings which contribute to the structural properties of the railcar bodyshell and other major structural components.

This document specifies requirements for castings which contribute to the structural properties of the railcar bodyshell and other major structural components. It specifies particular requirements regarding qualification, quality control, material properties and dimensional tolerances and gives guide-lines for application and use.

Committee	NFE/35
DevelopmentNote	Supersedes 04/30050372 DC (11/2006)
DocumentType	Standard
Pages	22
PublisherName	British Standards Institution
Status	Current
Supersedes	04/30050372 DC : DRAFT JUN 2004

Standards	Relationship
EN 13981-3:2006	Identical
I.S. EN 13981-3:2006	Identical
NF EN 13981-3 : 2006	Identical
NS EN 13981-3 : 1ED 2007	Identical
DIN EN 13981-3:2006-12	Identical
NBN EN 13981-3 : 2007	Identical
NEN EN 13981-3 : 2006	Identical
SN EN 13981-3 : 2006	Identical
UNE-EN 13981-3:2007	Identical
UNI EN 13981-3 : 2006	Identical

EN 444:1994	Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
EN ISO 3834-2:2005	Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
ISO 9606-2:2004	Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
ISO 10042:2005	Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections
ISO 15614-2:2005	Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
EN 1011-4:2000/A1:2003	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS
ASTM E 155 : 2015 : REDLINE	Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
EN 895:1995	Destructive tests on welds in metallic materials - Transverse tensile test
EN 473:2008	Non-destructive testing - Qualification and certification of NDT personnel - General principles
ISO 5579:2013	Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
ISO 15614-4:2005	Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings
EN 12258-1:2012	Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
ISO 3834-2:2005	Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
EN 1706:2010	Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
EN ISO 15614-2:2005	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN 1371-1:2011	Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
EN ISO 9606-2:2004	Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN 1559-1:2011	Founding - Technical conditions of delivery - Part 1: General
EN ISO 15614-4:2005/AC:2007	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS
EN 10204:2004	Metallic products - Types of inspection documents
ENV 1999-2 : DRAFT 1998	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 2: STRUCTURES SUSCEPTIBLE TO FATIGUE
ISO 9001:2015	Quality management systems — Requirements
EN 462-1:1994	Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
EN 12681 : 2003	FOUNDING - RADIOGRAPHIC EXAMINATION
EN 1559-4:2015	Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings
EN 571-1:1997	Non destructive testing - Penetrant testing - Part 1: General principles
ISO 8062:1994	Castings System of dimensional tolerances and machining allowances

View more information

$294.12

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

BS EN 13981-3:2006

Current

Table of Contents

Abstract

Scope

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription