Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 14198 : 2016

Current
Current

The latest, up-to-date edition.

RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2016

European foreword
1 Scope
2 Normative References
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements
6 Performances
Annex A (normative) - Vehicle requirements
Annex B (informative) - Train related brake
        performance categories
Annex C (informative) - Explanation of
       'proven design' concept
Annex D (informative) - Corresponding standards
        EN - UIC
Annex E (normative) - Brake pipe pressure control
        system
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2008/57/EC
Bibliography

Defines basic requirements for the braking of trains hauled by locomotives: - For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system. - For trains hauled by locomotives and intended for use in fixed or predefined formation, the requirements on the vehicle and the train are necessary. In the case of a UIC brake system, this standard applies; if not, the EN 16185 series or the EN 15734 series applies.

Committee
RAE/4/-/1
DevelopmentNote
Supersedes 01/713391 DC. (01/2005) Supersedes 14/30270317 DC. (12/2016)
DocumentType
Standard
Pages
168
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
I.S. EN 14198:2016 Identical
NBN EN 14198 : 2005 Identical
UNE-EN 14198:2005 Identical
NEN EN 14198 : 2016 Identical
ONORM EN 14198 : 2017 Identical
UNI EN 14198 : 2005 Identical
SN EN 14198:2017 Identical
NS EN 14198 : 2004 Identical
NF EN 14198 : 2017 Identical
DIN EN 14198:2015-01 (Draft) Identical
EN 14198:2016 Identical
DIN EN 14198:2017-03 Identical

EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
EN 15595:2009+A1:2011 RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION
EN 15611:2008+A1:2010 Railway applications - Braking - Relay valves
EN 14531-1:2015 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
EN 15612:2008+A1:2010 Railway applications - Braking - Brake pipe accelerator valve
EN 15624:2008+A1:2010 Railway applications - Braking - Empty-loaded changeover devices
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
UIC 541-5 : 4ED 2005 BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) - ELECTROPNEUMATIC EMERGENCY BRAKE OVERRIDE (EBO)
NFF 11 100 : 1995 RAILWAY ROLLING STOCK - QUALITY OF COMPRESSED AIR FOR PNEUMATIC APPARATUSES AND CIRCUITS USE
EN 16185-2:2014 Railway applications - Braking systems of multiple unit trains - Part 2: Test methods
EN 15877-1:2012 Railway applications - Marking on railway vehicles - Part 1: Freight wagons
EN 15734-1:2010/AC:2013 RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS
EN 14535-2:2011 Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN 15877-2:2013 Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines
2008/57/EC : 2008 AMD 5 2014 DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE)
EN 15220:2016 (edition 2) Railway applications - Brake indicators
UIC 541-4 : 4ED 2010 BRAKES - BRAKES WITH COMPOSITION BRAKE BLOCKS - GENERAL CONDITIONS FOR CERTIFICATION OF COMPOSITE BRAKE BLOCKS
EN 14535-1:2005+A1:2011 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
UIC 547 : 4ED 1989 BRAKES - AIR BRAKE - STANDARD PROGRAMME OF TESTS
UIC 541-3 : 8ED 2017 BRAKES - DISC BRAKES AND THEIR APPLICATION - GENERAL CONDITIONS FOR THE APPROVAL OF BRAKE PADS
EN 15329:2015 Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles
EN 15273-2:2013+A1:2016 Railway applications - Gauges - Part 2: Rolling stock gauge
EN ISO 1127:1996 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EN 50553 : 2012 AMD 1 2016 RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK
UIC 541-07 : 1ED 1992 BRAKES - REGULATIONS GOVERNING THE CONSTRUCTION OF DIFFERENT TYPES OF BRAKING GEAR - SIMPLE PRESSURE RECEPTACLES OF STEEL, NOT FIRED, FOR AIR BRAKING EQUIPMENT AND AUXILIARY PNEUMATIC EQUIPMENT FOR RAILWAY ROLLING STOCK
ISO 8573-1:2010 Compressed air Part 1: Contaminants and purity classes
EN 15807:2011 Railway applications - Pneumatic half couplings
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
PREN 16834 : DRAFT 2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PERFORMANCE
EN 16451:2015 Railway applications - Braking - Brake pad holder
EN 50125-1:2014 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
EN 14531-2:2015 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles
EN 16452:2015 Railway applications - Braking - Brake blocks
EN 14601:2005+A1:2010 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
EN 286-4:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
UIC 541-6 : 1ED 2010 BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) AND PASSENGER ALARM SIGNAL (PAS) FOR VEHICLES USED IN HAULED CONSISTS
UIC 541-03 : 2ED 2015 BRAKES - SPECIFICATIONS FOR THE CONSTRUCTION OF VARIOUS BRAKE PARTS - DRIVER'S BRAKE VALVE / DRIVER'S BRAKE CONTROLLER
UIC 545 : 10ED 2014 BRAKES - INSCRIPTIONS, MARKS AND SIGNS
UIC 541-04 : 4ED 2014 BRAKES - REGULATIONS CONCERNING THE MANUFACTURE OF BRAKE COMPONENTS - SELF-ADJUSTING LOAD-PROPORTIONAL BRAKING SYSTEM AND AUTOMATIC 'EMPTY-LOADED' CONTROL DEVICE
UIC 540 : 6ED 2014 BRAKES - AIR BRAKES FOR FREIGHT TRAINS AND PASSENGER TRAINS
EN 14535-3:2015 Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification
EN 16334:2014 Railway applications - Passenger Alarm System - System requirements
EN 15734-2:2010/AC:2012 RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 2: TEST METHODS
EN 14033-1:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
UIC 542 : 7ED 2015 BRAKE PARTS - INTERCHANGEABILITY
CEN/TR 16251:2016 Railway applications - Environmental conditions - Design guidance for rolling stock
EN 50163 : 2004 COR 2013 RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS
UIC 541-06 : 2ED 2013 BRAKES - REGULATIONS CONCERNING THE CONSTRUCTION OF THE VARIOUS BRAKE COMPONENTS: MAGNETIC BRAKES
EN 16207:2014 Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
EN 15663:2017 Railway applications - Vehicle reference masses
EN 15625:2008+A1:2010 Railway applications - Braking - Automatic variable load sensing devices
PREN 16186-2 : DRAFT 2015 RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS
EN 16241:2014+A1:2016 Railway applications - Slack adjuster
EN 837-1:1996/AC:1998 PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
UIC 535-3 : 1976 REPRINT 1995 EQUIPPING OF WAGONS WITH DEVICES FOR PASSING FROM ONE TO THE OTHER AND WITH SCREW BRAKES
EN 13749:2011 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
UIC 541-1 : 8ED 2013 BRAKES - REGULATIONS CONCERNING THE DESIGN OF BRAKE COMPONENTS
UIC 541-05 : 3ED 2016 BRAKES - MANUFACTURING SPECIFICATIONS FOR VARIOUS BRAKE PARTS - WHEEL SLIDE PROTECTION DEVICE (WSP)
EN 15355:2008+A1:2010 Railway applications - Braking - Distributor valves and distributor-isolating devices
EN 16185-1:2014 Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions
UIC 544-1 : 6ED 2014 BRAKES - BRAKING PERFORMANCE

View more information
$549.02
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more