BS EN 14276-2 : 2007
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2007
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, quantities and units
4 Material
5 Piping classification
6 Design
7 Manufacturing
8 Testing and inspection
Annex A (informative) - DN System
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 97/23/EC
Bibliography
Defines the requirements for material, design, manufacturing, testing and documentation for stationary piping intended for use in refrigerating systems, heat pumps and secondary cooling and heating systems.
Committee |
RHE/18
|
DevelopmentNote |
Supersedes 03/302503 DC. (08/2007) 2007 Edition Re-Issued in June 2011 & incorporates AMD 1 2011. (06/2011) Reviewed and confirmed by BSI, June 2012. (05/2012)
|
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
ONORM EN 14276-2 : 2011 | Identical |
NEN EN 14276-2 : 2007 + A1 2011 | Identical |
I.S. EN 14276-2:2007 | Identical |
UNI EN 14276-2 : 2011 | Identical |
EN 14276-2:2007+A1:2011 | Identical |
SN EN 14276-2 : 2007 + A1 2011 | Identical |
NBN EN 14276-2 : 2007 + A1 2011 | Identical |
DIN EN 14276-2:2011-05 | Identical |
NS EN 14276-2 : 2007 + A1 2011 | Identical |
NF EN 14276-2 : 2007 + A1 2011 | Identical |
EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
ISO 23277:2015 | Non-destructive testing of welds Penetrant testing Acceptance levels |
EN 378-4:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery |
EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
EN 583-4:2002/A1:2003 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 4: EXAMINATION FOR DISCONTINUITIES PERPENDICULAR TO THE SURFACE |
EN 378-1:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
EN 378-3:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
EN 1714:1997/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS |
EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
EN 13480-1:2017 | Metallic industrial piping - Part 1: General |
EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
EN 12178:2016 | Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
EN 1653:1997/A1:2000 | COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS |
EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
CEN/TR 13480-7:2017 | Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures |
EN 10246-16:2000 | Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
EN 1289:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS |
EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
EN 1861:1998 | Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols |
EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 10246-9:2000 | Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
EN 1712:1997/A2:2004 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS |
EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
EN 12517-1:2006 | Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
ISO 817:2014 | Refrigerants Designation and safety classification |
EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
EN 764-3:2002 | Pressure equipment - Part 3: Definition of parties involved |
EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
EN 1435:1997/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.