Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 14384:2005

Current
Current

The latest, up-to-date edition.

Pillar fire hydrants
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-11-2006

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design requirements
  4.1 Dimensions
  4.2 Shell
  4.3 Elastomers
  4.4 Obturator - main valve
  4.5 Materials including lubricants in contact with
       water intended for human consumption
  4.6 Leaktightness and mechanical strength
  4.7 Components of the operating system
  4.8 Closing direction
  4.9 Opening turns
  4.10 Resistance of the hydrant to operating loads
  4.11 Operating mechanism
  4.12 Inlet connections
  4.13 Outlets
  4.14 Drainage and venting systems
  4.15 Security housing
  4.16 Internal and external corrosion resistance
  4.17 Colour
  4.18 Resistance to disinfection products
  4.19 Hydrants for non-potable water systems
  4.20 Hydraulic characteristics
5 Test methods
  5.1 General
  5.2 General dimensions
  5.3 Flow characteristics
6 Designation, marking and additional data
  6.1 Designation
  6.2 Marking of hydrants
  6.3 Additional hydrant data
7 Evaluation of conformity
  7.1 General
  7.2 Initial type testing
  7.3 Factory product control (FPC)
Annex ZA (informative) Clauses of this European Standard
                       addressing the provisions of the EU
                       Construction Products Directive
                       (89/106/EEC)
      ZA.1 Scope and relevant clauses
      ZA.2 Procedure for the attestation of conformity of
           pillar fire hydrants
      ZA.3 CE marking
      ZA.4 Certificate and Declaration of Conformity
Bibliography

Defines the minimum requirements, test methods, marking and evaluation of conformity for pillar hydrants for fire fighting purposes: - to be installed in a water distribution system; - sizes DN 80, DN 100 and DN 150; - suitable for an allowable operating pressure, PFA, of PN 16 with or without drain facility; - having vertical or horizontal, flanged, socket or spigot inlet; - with one or two outlets and having outlets to national requirements; - globe (screw down) or gate valve type.

Committee
FSH/17
DevelopmentNote
Supersedes 02/540339 DC (11/2006)
DocumentType
Standard
Pages
30
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
NEN EN 14384 : 2005 Identical
EN 14384:2005 Identical
DIN EN 14384:2005-10 Identical
UNE-EN 14384:2006 Identical
NS EN 14384 : 1ED 2005 Identical
NBN EN 14384 : 2005 Identical
NF EN 14384 : 2006 Identical
UNI EN 14384 : 2006 Identical
I.S. EN 14384:2005 Identical
DIN EN 14384 E : 2005 Identical

BS 9990:2015 Non automatic fire-fighting systems in buildings. Code of practice
BS 9990:2006 Code of practice for non-automatic fire-fighting systems in buildings
14/30301827 DC : 0 BS 9990 - NON-AUTOMATIC FIRE-FIGHTING SYSTEMS IN BUILDINGS - CODE OF PRACTICE

EN 1074-6:2008 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 1503-3:2000/AC:2001 VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 3: CAST IRONS SPECIFIED IN EUROPEAN STANDARDS
EN 1503-1:2000 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
EN 1074-1:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
EN 736-2:2016 Valves - Terminology - Part 2: Definition of components of valves
EN ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 1074-2:2000/A1:2004 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 2 - ISOLATING VALVES
ISO 9001:2015 Quality management systems — Requirements
EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
EN 736-3:2008 Valves - Terminology - Part 3: Definition of terms

View more information
$407.85
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more