Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 15027 : 2007

Current
Current

The latest, up-to-date edition.

TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
  5.1 General
  5.2 Mechanical hazards
       5.2.1 General
       5.2.2 Protection against moving parts
       5.2.3 Stability
       5.2.4 Transport and handling
       5.2.5 Fixing of the cutting tool
       5.2.6 Manual starting
       5.2.7 Guiding systems
       5.2.8 Control devices
       5.2.9 Failure of power supply
  5.3 Electrical hazards
  5.4 Thermal hazards
  5.5 Exhaust fumes (internal combustion engines)
  5.6 Hydraulic and pneumatic installations
       5.6.1 Hydraulic installations
       5.6.2 Pneumatic installations
       5.6.3 Hoses and pipes under pressure
  5.7 Fluid containers
  5.8 Cutting debris and dust emission
  5.9 Rotational speed
  5.10 Noise reduction at design stage
  5.11 Maintenance
6 Verification of safety requirements and/or measures
7 Information for use
  7.1 General
  7.2 Marking
       7.2.1 Regular marking
       7.2.2 Other information
       7.2.3 Warning about residual risks
  7.3 Accompanying documents
       7.3.1 General
       7.3.2 Operator's instructions
       7.3.3 Maintenance instructions
       7.3.4 Spare parts list
Annex A (normative) - Noise test code - Grade 2 of accuracy
        A.1 General
        A.2 Measurement of the A-weighted emission sound
            pressure level at the work station
        A.3 Determination of the A-weighted sound power level
            emitted by the machine
        A.4 Operating conditions
        A.5 Information to be recorded
        A.6 Information to be reported
        A.7 Noise declaration by the manufacturer
Annex B (normative) - Requirements for cutting-off wheel and
        wire guards
        B.1 General
        B.2 Tool guards for wall saws
        B.3 Tool guard for wire saws
Annex C (normative) - Pictograms
Annex D (normative) - Verification of surface temperature
        D.1 Test equipment
        D.2 Test method
        D.3 Test acceptance
Annex E (informative) - Examples for working areas and dangerous
        areas for wire saws
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

Covers all significant hazards, hazardous situations and events relevant to wall saws and wire saws machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

Committee
B/513/-/6
DevelopmentNote
Supersedes 04/19987464 DC. (12/2007) 2007 Edition Re-Issued in May 2009 & incorporates AMD 1 2009. Supersedes 08/30176810 DC. (05/2009)
DocumentType
Standard
Pages
40
PublisherName
British Standards Institution
Status
Current
Supersedes

EN 13236:2010+A1:2015 Safety requirements for superabrasive products
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
ISO 21537-2:2004 Clamping flanges for superabrasive cutting-off wheels — Part 2: Building and construction
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
IEC 61029-1:1990 Safety of transportable motor-operated electric tools - Part 1: General requirements
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 61029-1:2009/A11:2010 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 15163:2017 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

View more information
$427.45
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more