BS EN 15090:2012
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
29-02-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification, design and type
5 Sampling and conditioning
6 Requirements
7 Test methods
8 Marking
9 Information to be supplied
Annex A (informative) - Example of guidelines
and considerations for performing a risk
Annex B (normative) - Assessment of the footwear
by the laboratory during testing of thermal
behaviour
Annex C (informative) - Assessment of the footwear
by the wearer
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 89/686/EEC
Bibliography
Describes minimum requirements and test methods for the performance of three types of footwear for use by firefighters for fire suppression, general-purpose rescue, fire rescue and hazardous materials emergencies.
This European standard specifies minimum requirements and test methods for the performance of three types (see 4.3) of footwear for use by firefighters for fire suppression, general-purpose rescue, fire rescue and hazardous materials emergencies.
This European standard does not cover special personal protective equipment used in high-risk situations (for example, the conditions described in ISO15538).
Committee |
PH/1
|
DevelopmentNote |
Supersedes 00/565765 DC and BS 2723(1956). (08/2006) Supersedes 09/30203310 DC. (02/2012)
|
DocumentType |
Standard
|
Pages |
38
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN 15090 : 2012 | Identical |
NS EN 15090 : 2012 | Identical |
NEN EN 15090 : 2012 | Identical |
NBN EN 15090 : 2012 | Identical |
I.S. EN 15090:2012 | Identical |
UNE-EN 15090:2012 | Identical |
NF EN 15090 : 2012 | Identical |
EN 15090:2012 | Identical |
UNI EN 15090 : 2012 | Identical |
DIN EN 15090 E : 2012 | Identical |
DIN EN 15090:2012-04 | Identical |
EN ISO 3377-1:2011 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
EN ISO 3376:2011 | Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011) |
ISO 4045:2008 | Leather Chemical tests Determination of pH |
PREN ISO 20347 : DRAFT 2009 | PERSONAL PROTECTIVE EQUIPMENT - OCCUPATIONAL FOOTWEAR |
89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
EN 13832-1:2006 | Footwear protecting against chemicals - Part 1: Terminology and test methods |
EN ISO 20344:2011 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
EN ISO 4674-2:1998 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 2: BALLISTIC PENDULUM METHOD |
ISO 3758:2012 | Textiles — Care labelling code using symbols |
EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
ISO 2023:1994 | Rubber footwear Lined industrial vulcanized-rubber boots Specification |
ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
EN ISO 4045:2008 | Leather - Chemical tests - Determination of pH (ISO 4045:2008) |
ISO 15538:2001 | Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
EN 13832-3:2006 | Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
ISO 3377-2:2016 | Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tear |
EN ISO 3377-2:2016 | Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2016) |
EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
ISO 4643:1992 | Moulded plastics footwear — Lined or unlined poly(vinyl chloride) boots for general industrial use — Specification |
ISO 4674-2:1998 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 2: Ballistic pendulum method |
EN ISO 20345:2011 | Personal protective equipment - Safety footwear (ISO 20345:2011) |
EN 50321:1999 | Electrically insulating footwear for working on low voltage installations |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
EN 13287:2004 | Personal protective equipment - Footwear - Test method for slip resistance |
EN ISO 3758:2012 | Textiles - Care labelling code using symbols (ISO 3758:2012) |
ISO 3376:2011 | Leather Physical and mechanical tests Determination of tensile strength and percentage extension |
ISO 34-2:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
EN 13832-2:2006 | Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.