Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 16668 : 2016

Current
Current

The latest, up-to-date edition.

INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2016

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Category of valves
5 Requirements
Annex A (normative) - Classification of valves
Annex B (informative) - European harmonized standards for
        materials and components for shell parts
Annex C (informative) - European Approval of Materials (EAM)
Annex D (informative) - European harmonized supporting
        standards for valves
Annex E (informative) - Non-destructive testing of steel castings
Annex F (normative) - Non-destructive testing (NDT) of joint welding
Annex ZA (informative) - Relationship between this European
         Standard and the essential requirements of Directive
         2014/68/EU (Pressure equipment Directive) aimed to be
         covered
Bibliography

Pertains to metallic valves as pressure accessories for industrial applications with a maximum allowable pressure PS greater than 0,5 bar in accordance with the Pressure Equipment Directive 2014/68/EU and specifies minimum requirements applicable to design, manufacture, testing, materials and documentation.

Committee
PSE/18/1
DevelopmentNote
Supersedes 13/30287824 DC. (06/2016)
DocumentType
Standard
Pages
102
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
EN 16668:2016+A1:2018 Identical

ISO 17636-1:2013 Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
EN ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 13789:2010 Industrial valves - Cast iron globe valves
ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
EN ISO 19232-3:2013 Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013)
EN 13445-5 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN 10213:2007+A1:2016 Steel castings for pressure purposes
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
ISO 17635:2016 Non-destructive testing of welds — General rules for metallic materials
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
EN 1349:2009 Industrial process control valves
EN 12334:2001/A1:2004 INDUSTRIAL VALVES - CAST IRON CHECK VALVES
EN 12680-1:2003 Founding - Ultrasonic examination - Part 1: Steel castings for general purposes
ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
EN 12288:2010 Industrial valves - Copper alloy gate valves
EN 1983:2013 Industrial valves - Steel ball valves
EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
EN 13709:2010 Industrial valves - Steel globe and globe stop and check valves
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
ISO 5579:2013 Non-destructive testing Radiographic testing of metallic materials using film and X- or gamma rays Basic rules
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 3452-1:2013 Non-destructive testing Penetrant testing Part 1: General principles
ISO 16810:2012 Non-destructive testing — Ultrasonic testing — General principles
EN ISO 9934-1:2016 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
EN ISO 11970:2016 Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016)
EN ISO 19232-1:2013 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
EN ISO 5579:2013 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013)
EN 1370:2011 Founding - Examination of surface condition
ISO 19232-3:2013 Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes
ISO 11970:2016 Specification and qualification of welding procedures for production welding of steel castings
EN 1559-2:2014 Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
EN 12516-3:2002/AC:2003 VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN 1371-1:2011 Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
EN 593:2017 Industrial valves - Metallic butterfly valves for general purposes
ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys
EN ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 1371-2:2015 Founding - Liquid penetrant testing - Part 2: Investment castings
ISO 9934-1:2016 Non-destructive testing — Magnetic particle testing — Part 1: General principles
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
2014/68/EU : 2014 COR 1 2015 DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 MAY 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF PRESSURE EQUIPMENT TEXT WITH EEA RELEVANCE
CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 12164:2016 Copper and copper alloys - Rod for free machining purposes
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
EN 1369:2012 Founding - Magnetic particle testing
ISO 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
EN 1984:2010 Industrial valves - Steel gate valves
EN 14341:2006 Industrial valves - Steel check valves
EN 12681 : 2003 FOUNDING - RADIOGRAPHIC EXAMINATION
EN 13018:2016 NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES
EN 12420:2014 Copper and copper alloys - Forgings
EN 1171:2015 Industrial valves - Cast iron gate valves
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
EN 19:2016 Industrial valves - Marking of metallic valves
EN 1982:2017 Copper and copper alloys - Ingots and castings
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
ISO 4992-1:2006 Steel castings Ultrasonic examination Part 1: Steel castings for general purposes
EN 12163:2016 Copper and copper alloys - Rod for general purposes
EN 1561:2011 Founding - Grey cast irons
EN 13397:2001 Industrial valves - Diaphragm valves made of metallic materials
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
$509.81
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more