BS EN 196-1:2016
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
31-05-2016
European foreword
1 Scope
2 Normative references
3 Principle
4 Laboratory and equipment
5 Mortar constituents
6 Preparation of mortar
7 Preparation of test specimens
8 Conditioning of test specimens
9 Testing procedures
10 Results
11 Validation testing of CEN Standard sand
and of alternative compaction equipment
Annex A (normative) - Alternative vibration compaction
equipment and procedures validated as equivalent
to the reference jolting compaction equipment and
procedure
Provides the method for the determination of the compressive and, optionally, the flexural strength of cement mortar.
This part of EN196 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, EN196‑1 , or alternative compaction equipment. This part of EN196 describes the reference equipment and procedure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used.
| Committee |
B/516/12
|
| DevelopmentNote |
Partially supersedes BS 4550-3.4(1978). (03/2005) Supersedes 02/104621 DC. (04/2005)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 196-1:2015-08 (Draft) | Identical |
| I.S. EN 196-1:2016 | Identical |
| UNI EN 196-1 : 2005 | Identical |
| NS EN 196-1 : 1994 | Identical |
| SN EN 196-1 : 2016 | Identical |
| NBN EN 196-1 : 2016 | Identical |
| NEN EN 196-1 : 2016 | Identical |
| UNE-EN 196-1:2005 | Identical |
| NF EN 196-1 : 2016 | Identical |
| EN 196-1:2016 | Identical |
| DIN EN 196-1:2016-11 | Identical |
| BS 3892-3:1997 | Pulverized-fuel ash Specification for pulverized-fuel ash for use in cementitious grouts |
| BS 1881-131:1998 | Testing concrete Methods for testing cement in a reference concrete |
| 14/30291598 DC : 0 | BS 8500-2 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 6744:2016 | Stainless steel bars. Reinforcement of concrete. Requirements and test methods |
| 04/301608 DC : DRAFT JAN 2004 | BS 4248 - SPECIFICATION FOR SUPERSULFATED CEMENT |
| BS 5328-1:1997 | Concrete Guide to specifying concrete |
| BS 4248:2004 | Supersulfated cement |
| BS 146:1996 | Specification for Portland blastfurnace cements |
| BS 3892-1:1997 | Pulverized-fuel ash Specification for pulverized-fuel ash for use with Portland cement |
| BS 7583:1996 | Specification for Portland limestone cement |
| BS 12:1996 | Specification for Portland cement |
| BS 6588:1996 | Specification for Portland pulverized-fuel ash cements |
| BS 4246:1996 | Specification for high slag blastfurnace cement |
| BS 5224:1995 | Specification for masonry cement |
| BS 146:2002 | Specification for blastfurnace cements with strength properties outside the scope of BS EN 197-1 |
| 09/30203688 DC : 0 | BS 7861-2 - STRATA REINFORCEMENT SUPPORT SYSTEMS COMPONENTS USED IN COAL MINES - PART 2: SPECIFICATION FOR FLEXIBLE SYSTEMS FOR ROOF REINFORCEMENT |
| BS 7979:2001 | Specification for limestone fines for use with Portland cement |
| BS 6463-101:1996 | Quicklime, hydrated lime and natural calcium carbonate Methods for preparing samples for testing |
| BS 915-2:1972 | Specification for high alumina cement Metric units |
| BS PAS 8820(2016) : 2016 | CONSTRUCTION MATERIALS - ALKALI-ACTIVATED CEMENTITIOUS MATERIAL AND CONCRETE - SPECIFICATION |
| BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
| BS 4027:1996 | Specification for sulfate-resisting Portland cement |
| BS 6610:1996 | Specification for Pozzolanic pulverized-fuel ash cement |
| 02/101648 DC : DRAFT FEB 2002 | BS 915 - SPECIFICATION FOR HIGH ALUMINA CEMENT |
| BS 6463-103:1999 | Quicklime, hydrated lime and natural calcium carbonate Methods for physical testing |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| BS 7979:2016 | Specification for limestone fines for use with Portland cement |
| 15/30320587 DC : DRAFT AUG 2015 | BS 6744 - STAINLESS STEEL BARS - REINFORCEMENT OF CONCRETE - REQUIREMENTS AND TEST METHODS |
| BS 7861-2:1997 | Strata reinforcement support system components used in coal mines Specification for birdcaged cablebolting |
| BS 8500-2(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 8500-2:2002 | Concrete. Complementary British Standard to BS EN 206-1 Specification for constituent materials and concrete |
| BS 8500-2(2006) : 2006 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| BS 7861-2:2009 | Strata reinforcement support systems components used in coal mines Specification for flexible systems for roof reinforcement |
| EN 196-7:2007 | Methods of testing cement - Part 7: Methods of taking and preparing samples of cement |
| ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| EN ISO 1302 : 2002 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002) |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.