BS EN 469:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Protective clothing for firefighters. Performance requirements for protective clothing for firefighting
Available format(s)
Hardcopy , PDF
Superseded date
29-08-2020
Language(s)
English
Published date
31-07-2014
Publisher
This European Standard specifies minimum levels of performance requirements for protective clothing against heat and fire designed to be worn during firefighting operations, except protective clothing that is worn during fighting wildland fires (EN 15614) or specialized firefighting (EN 1486).
Within this European Standard, two performance levels are given for performance requirements 6.3, 6.4, 6.12 and 6.13:
thermal protection level two (marked with X2) is the higher level;
thermal level one (marked with X1) is the lower level.
This European Standard covers the general clothing design, the minimum performance levels of the materials used, the methods of test to be used to determine these performance levels, and marking and information supplied by the manufacturer.
Neither does this European Standard cover the protection against other hazards, such as chemical, electrical, biological, radiological or high-visibility hazards, nor does it cover the protection for the head, hands or feet. These aspects may be covered in other European Standards. However, the event of small accidental splashes of chemicals or flammable liquids is covered by this standard.
| Committee |
PH/3/2
|
| DevelopmentNote |
Supersedes BS 1547(1959) (07/2004) Supersedes 91/39595 DC. (09/2005) Supersedes 00/564562 DC. (03/2006) Supersedes 11/30235982 DC. (07/2014) 2014 Edition issued in July 2014 has been declared withdrawn by publisher on 30 April 2015. (04/2015)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 469 : 2007 | Identical |
| NEN EN 469 : 2006 AMD 1 2006 | Identical |
| UNE-EN 469:2006 | Identical |
| EN 469:2005/A1:2006 | Identical |
| SN EN 469 : 2006 | Identical |
| NF EN 469 : 2014 | Identical |
| NS EN 469 : 2005 AMD 1 2006 | Identical |
| NBN EN 469 : 2014 | Identical |
| UNI EN 469 : 2014 | Identical |
| I.S. EN 469:2014 | Identical |
| DIN EN 469:2015-08 (Draft) | Identical |
| DIN EN 469:2007-02 | Identical |
| BS 8467:2006 | Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods |
| ASTM F 3031 : 2017 | Standard Practice for Range of Motion Evaluation of First Responder’s Protective Ensembles |
| NFPA 403 : 2018 | AIRCRAFT RESCUE AND FIRE-FIGHTING SERVICES AT AIRPORTS |
| EI Model Code of Safe Practice Part 16:2017 | MODEL CODE OF SAFE PRACTICE - PART 16: GUIDANCE ON TANK CLEANING |
| EN 943-1:2015 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 13988:2008 | Passenger vehicle wheels — Clip balance weight and rim flange nomenclature, test procedures and performance requirements |
| EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
| EN ISO 13937-2 : 2000 | TEXTILES - TEAR PROPERTIES OF FABRICS - PART 2: DETERMINATION OF TEAR FORCE OF TROUSER-SHAPED TEST SPECIMENS (SINGLE TEAR METHOD) (ISO 13937-2:2000) |
| ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
| EN 1082-3:2000 | Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials |
| EN 20811 : 1992 | TEXTILES - DETERMINATION OF RESISTANCE TO WATER PENETRATION - HYDROSTATIC PRESSURE TEST |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| CEN/TR 14560:2003 | Guidance for selection, use, care and maintenance of protective clothing against heat and flame |
| ISO 11612:2015 | Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
| ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
| EN ISO 13998:2003 | Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
| EN ISO 11612:2015 | Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015) |
| ISO 7941:1988 | Commercial propane and butane Analysis by gas chromatography |
| EN ISO 11611:2015 | Protective clothing for use in welding and allied processes (ISO 11611:2015) |
| ISO 15538:2001 | Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
| EN 863:1995 | Protective clothing - Mechanical properties - Test method: Puncture resistance |
| EN 136:1998/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
| ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
| ISO 15384:2003 | Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
| ISO 11611:2015 | Protective clothing for use in welding and allied processes |
| EN ISO 6530:2005 | Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
| ISO 14460:1999 | Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods |
| EN 471:2003+A1:2007 | High-visibility warning clothing for professional use - Test methods and requirements |
| ISO 7933:2004 | Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
| EN 1149-2:1997 | Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| EN 13911:2017 | Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters |
| EN ISO 7933:2004 | Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004) |
| EN 31092:1993/A1:2012 | TEXTILES - DETERMINATION OF PHYSIOLOGICAL PROPERTIES - MEASUREMENT OF THERMAL AND WATER-VAPOUR RESISTANCE UNDER STEADY-STATE CONDITIONS (SWEATING GUARDED - HOTPLATE TEST) (ISO 11092:1993/AMD 1:2012) |
| EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
| EN 340:2003 | Protective clothing - General requirements |
| EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| EN 367:1992/AC:1992 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF DETERMINING HEAT TRANSMISSION ON EXPOSURE TO FLAME |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| EN 531:1995/A1:1998 | PROTECTIVE CLOTHING FOR INDUSTRIAL WORKERS EXPOSED TO HEAT |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| ISO 9886:2004 | Ergonomics Evaluation of thermal strain by physiological measurements |
| EN 533 : 1997 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - LIMITED FLAME SPREAD MATERIALS AND MATERIAL ASSEMBLIES |
| EN ISO 6330:2012 | Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
| EN 2419920 : 1992 | TEXTILES - DETERMINATION OF RESISTANCE TO SURFACE WETTING (SPRAY TEST) OF FABRICS |
| EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
| EN ISO 9886:2004 | Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 9886:2004) |
| ISO 13506:2008 | Protective clothing against heat and flame Test method for complete garments Prediction of burn injury using an instrumented manikin |
| EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
| CLC/TS 50354:2003 | Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc |
| ISO 11613:1999 | Protective clothing for firefighters Laboratory test methods and performance requirements |
$407.85
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.