Railway applications. Electric equipment for rolling stock General service conditions and general rules

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

13-12-2017

Publisher

British Standards Institution

This part of IEC60077 specifies the general service conditions and requirements for all electric equipment installed in power circuits, auxiliary circuits, control and indicating circuits etc., on railway rolling stock. NOTE Some of these rules can, after agreement between the user and the manufacturer, be used for electrical equipment installed on vehicles other than railway rolling stock, such as mine locomotives, trolley buses, etc. The purpose of this document is to harmonize as far as practicable all rules and requirements of a general nature applicable to electric equipment for rolling stock. This is in order to obtain uniformity of requirements and tests throughout the corresponding range of equipment to avoid the need for testing to different standards. All requirements relating to: the environmental stresses expected during the normal service conditions; the construction; the performance and the associated tests which can be considered as general; have therefore been gathered in this document together with specific subjects of wide interest and application, for example temperature rise, dielectric properties, etc. In the event of there being a difference in requirements between this document and a railway rolling stock relevant product standard, then the product standard requirements take precedence.

Committee	GEL/9/2
DevelopmentNote	Supersedes 90/34702 DC (01/2003) Supersedes 16/30296081 DC. (12/2017)
DocumentType	Standard
Pages	58
PublisherName	British Standards Institution
Status	Current
Supersedes	BS EN 60077-1:2002

Standards	Relationship
EN 60077-1:2017	Identical
EN 61158-4-18:2008	Identical
SN EN 60077-1 : 2002	Identical
UNE-EN 60077-1:2002	Identical
NF EN 60077-1 : 2002	Identical
IEC 60077-1:2017	Identical
NBN EN 60077-1 : 2002	Identical
I.S. EN 60077-1:2002	Identical

IEC 60112:2003+AMD1:2009 CSV	Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV	High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
IEC 62236-3-1:2008	Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
IEC 60077-3:2001	Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers
EN 60216-1:2013	Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 61373:2010	Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 60322:2001	Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
IEC 60050-811:1991	International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
EN 60085:2008	Electrical insulation - Thermal evaluation and designation
IEC 60364-4-41:2005+AMD1:2017 CSV	Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61133:2016	Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
EN 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60050-151:2001	International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
EN 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60050-441:1984	International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
EN 61373:2010/AC:2017-09	RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
EN 60721-3-5:1997	Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations
IEC 60721-3-5:1997	Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
IEC 60850:2014	Railway applications - Supply voltages of traction systems
IEC 60505:2011	Evaluation and qualification of electrical insulation systems
IEC 60085:2007	Electrical insulation - Thermal evaluation and designation
IEC 60076-12:2008	Power transformers - Part 12: Loading guide for dry-type power transformers
IEC 60077-2:2017	Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC TR 60943:1998+AMD1:2008 CSV	Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
IEC 61991:2000	Railway applications - Rolling stock - Protective provisions against electrical hazards
IEC 60571:2012	Railway applications - Electronic equipment used on rolling stock
IEC 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 62236-3-2:2008	Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
EN 60068-2-78:2013	Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
IEC 61992-1:2006+AMD1:2014 CSV	Railway applications - Fixed installations - DC switchgear - Part 1:General
IEC 62497-1:2010+AMD1:2013 CSV	Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
IEC 60587:2007	Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
IEC 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 61140:2016	Protection against electric shock - Common aspects for installation and equipment
IEC 60216-5:2008	Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 60071-1:2006+AMD1:2010 CSV	Insulation co-ordination - Part 1: Definitions, principles and rules
EN 60505:2011/AC:2017-03	EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60068-2-52:2017	Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60216-1:2013	Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 62498-1:2010	Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
IEC 60077-5:2003	Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
IEC 60077-4:2003	Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
IEC 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60310:2016	Railway applications - Traction transformers and inductors on board rolling stock