Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 61169-1:2013

Current
Current

The latest, up-to-date edition.

Radio-frequency connectors Generic specification. General requirements and measuring methods
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-04-2016

1 Scope
2 Normative references
3 Terms and definitions
4 Units, symbols and dimensions
5 Standards ratings and characteristics
6 Classifications into climatic categories
7 IEC type designation
8 Testing
9 Test methods
10 Quality assessment
11 Marking
Annex A (informative) - Simulated sea-water solution for use
        with salt mist test (marine environment)
Bibliography
Annex ZA (normative) - Normative references to international
         Publications with their corresponding
         European publications

Pertains to radio frequency connectors for r.f. transmission lines for use in telecommunications, electronics and similar equipment.

This part of IEC 61169, which is a generic specification, relates to radio frequency connectors for r.f. transmission lines for use in telecommunications, electronics and similar equipment.

It provides the basis for the sectional standards, which apply to individual connector types. It is intended to establish uniform concepts and procedures concerning:

  • terminology;

  • standard ratings and characteristics;

  • testing and measuring procedures concerning electrical, mechanical and climatic properties;

  • classification of connectors with regard to climatic testing procedures involving temperature and humidity.

  • The test methods and procedures of this standard are intended for acceptance and type approval testing.

Committee
EPL/46
DevelopmentNote
Supersedes 10/30234803 DC. (11/2013)
DocumentType
Standard
Pages
64
PublisherName
British Standards Institution
Status
Current
Supersedes

BS QC 222000:1996 Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling. Characteristic impedance 50 ohms. (Type TNC)
BS QC 221200:1997 Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (Type BNC)
BS QC 221400:1997 Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with screw coupling. Characteristic impedance 50 ohms (Type SMC)
BS QC 222400:1997 Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 5,6 mm (0,22 in). Characteristic impedance 75 ohms (type 1,6/5,6). Characteristic impedance 50 ohms (type 1,8/5,6) with similar mating dimensions
BS QC 221100:1997 Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling. Characteristic impedance 50 ohms (Type SMA)
BS QC 222100:1997 Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (Type N)
BS QC 221300:1997 Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling. Characteristic impedance 50 ohms (Type SMB)

HD 351.1 : 200S1 RIGID PRECISION COAXIAL LINES AND THEIR ASSOCIATED PRECISION CONNECTORS - GENERAL REQUIREMENTS AND MEASURING METHODS
EN 61726:2015 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
IEC 60457-1:1974 Rigid precision coaxial and their associated precision connectors. Part 1: General requirements and measuring methods
ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
EN 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
EN 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
ISO 2859:1974 Sampling procedures and tables for inspection by attributes
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60096-2:1961 Radio-frequency cables - Part 2: Relevant cable specifications
IEC 60068-2-13:1983 Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
IEC 60068-2-11:1981 Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
ISO 2859-0:1995 Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
IEC 60068-2-54:2006 Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method
EN 60068-2-17:1994 Environmental testing - Part 2: Tests - Test Q: Sealing
IEC 60068-2-17:1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-61:1991 Environmental testing - Part 2-61: Test methods - Test Z/ABDM:Climatic sequence
ISO 2015:1976 Numbering of weeks
IEC 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
ISO 129-1:2004 Technical drawings Indication of dimensions and tolerances Part 1: General principles
EN 60068-2-29:1993 Environmental testing - Part 2: Tests - Test Eb and guidance: Bump
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60068-2-13:1999 Environmental testing - Part 2: Tests - Test M: Low air pressure
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 60068-2-61:1993 Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence
IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
EN 60068-2-11:1999 Environmental testing - Part 2: Tests - Test Ka: Salt mist
EN 60068-2-54:2006 Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 61726:2015 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
$568.62
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more