Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 62282-3-200:2016

Current
Current

The latest, up-to-date edition.

Fuel cell technologies Stationary fuel cell power systems. Performance test methods
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-03-2016

This part of IEC62282 covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply as follows: power output under specified operating and transient conditions; electrical and heat recovery efficiency under specified operating conditions; environmental characteristics; for example, exhaust gas emissions, noise, etc. under specified operating and transient conditions. This standard does not provide coverage for electromagnetic compatibility (EMC). This standard does not apply to small stationary fuel cell power systems with electric power output of less than 10kW which are dealt with IEC62282‑3‑201 . Fuel cell power systems may have different subsystems depending upon types of fuel cell and applications, and they have different streams of material and energy into and out of them. However, a common system diagram and boundary has been defined for evaluation of the fuel cell power system (see Figure1). The following conditions are considered in order to determine the system boundary of the fuel cell power system: all energy recovery systems are included within the system boundary; all kinds of electric energy storage devices are considered outside the system boundary; calculation of the heating value of the input fuel (such as natural gas, propane gas and pure hydrogen gas, etc.) is based on the conditions of the fuel at the boundary of the fuel cell power system. [Image removed.]

Committee
GEL/105
DevelopmentNote
Supersedes BS EN 62282-3-2 and 10/30173701 DC. (02/2012) 2012 Edition remains active & will be withdrawn on 12/08/2016. Supersedes 14/30280137 DC. (03/2016)
DocumentType
Standard
Pages
80
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
EN 62282-3-200:2016 Identical
IEC 62282-3-200:2015 Identical

ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems
EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
IEC 61672-2:2013+AMD1:2017 CSV Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
EN ISO 11541:2002 Natural gas - Determination of water content at high pressure (ISO 11541:1997)
ISO 3648:1994 Aviation fuels — Estimation of net specific energy
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
ISO 14687-3:2014 Hydrogen fuel Product specification Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances
EN 60359:2002 Electrical and electronic measurement equipment - Expression of performance
EN 61672-2:2013/A1:2017 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017)
ISO 11086:1996 Gas turbines — Vocabulary
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
IEC TS 62282-1:2013 Fuel cell technologies - Part 1: Terminology
IEC 60688:2012 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
EN ISO 10523:2012 Water quality - Determination of pH (ISO 10523:2008)
EN 61000-4-7:2002/A1:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO (IEC 61000-4-7:2002/A1:2008)
ISO 6975:1997 Natural gas — Extended analysis — Gas-chromatographic method
ISO 7935:1992 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
IEC 62052-11:2003+AMD1:2016 CSV Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
ISO 8217:2017 Petroleum products Fuels (class F) Specifications of marine fuels
ISO 6060:1989 Water quality — Determination of the chemical oxygen demand
ISO 4677-1:1985 Atmospheres for conditioning and testing Determination of relative humidity Part 1: Aspirated psychrometer method
ISO 16622:2002 Meteorology Sonic anemometers/thermometers Acceptance test methods for mean wind measurements
ISO 11042-1:1996 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
ISO 11042-2:1996 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 50470-1:2006 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
ISO 11541:1997 Natural gas Determination of water content at high pressure
EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
EN ISO 6975:2005 Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997)
IEC 61000-4-7:2002+AMD1:2008 CSV Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
IEC 62053-22:2003+AMD1:2016 CSV Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
IEC 60359:2001 Electrical and electronic measurement equipment - Expression of performance
ISO 5815-2:2003 Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 2: Method for undiluted samples
ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers
ISO 10849:1996 Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics of automated measuring systems
ISO 10780:1994 Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts
EN 61028:1993/A2:1997 ELECTRICAL MEASURING INSTRUMENTS - X-Y RECORDERS
EN ISO 6976:2016 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
ISO 10523:2008 Water quality — Determination of pH
ISO 10396:2007 Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
IEC 61028:1990 Electrical measuring instruments - X-Y recorders
ISO 4677-2:1985 Atmospheres for conditioning and testing Determination of relative humidity Part 2: Whirling psychrometer method
EN 61000-4-13:2002/A2:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002/A2:2015)
IEC 60050-300:2001 International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
IEC 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
ISO 11632:1998 Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method

View more information
$615.68
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more