Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

24-12-2003

Publisher

British Standards Institution

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
  3.1 Terms and definitions
  3.2 Abbreviated terms
4 General
  4.1 Dimensions and units
  4.2 Design
  4.3 System selection
  4.4 Pressure design code
  4.5 Basic design
  4.6 Welding
  4.7 Statutory requirements
  4.8 Documentation requirements
5 Piping
  5.1 General
  5.2 Oil piping
  5.3 Instrument piping and tubing
  5.4 Process piping
  5.5 Intercoolers and aftercoolers
6 Instrumentation, control and electrical systems
  6.1 General
  6.2 Alarm, shutdown and control systems
  6.3 Instrumentation
  6.4 Electrical systems
7 Inspection testing, and preparation for shipment
  7.1 General
  7.2 Inspection
  7.3 Testing
  7.4 Preparation for shipment
8 Vendor's data
  8.1 General
  8.2 Proposals
  8.3 Contract data
Annex A (informative) Datasheets
Annex B (informative) Symbols
Annex C (informative) Vendor drawing and data
        requirements (VDDR)
Annex D (informative) Oil or gas filter performance
        and oil-system cleanliness testing
Annex E (informative) International materials specifications
Annex F (informative) Explanation of reservoir levels
Bibliography

Defines general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications.

Committee	PSE/17/-/6
DevelopmentNote	Supersedes 99/714230 DC. (01/2004)
DocumentType	Standard
Pages	64
PublisherName	British Standards Institution
Status	Current
SupersededBy	BS EN ISO 10438-1:2007
Supersedes	99/714230 DC : OCT 99

Standards	Relationship
I.S. EN ISO 10438-1:2007	Identical
DIN EN ISO 10438-1:2010-08	Identical
NS EN ISO 10438-1 : 2ED 2007	Identical
NEN EN ISO 10438-1 : 2008	Identical
ISO 10438-1:2007	Identical
NBN EN ISO 10438-1 : 2008	Identical
API 614 : 2008	Identical
UNI EN ISO 10438-1 : 2009	Identical
EN ISO 10438-1:2007	Identical
SN EN ISO 10438-1:2008	Identical
NF EN ISO 10438-1 : 2009	Identical

ISO 15649:2001	Petroleum and natural gas industries — Piping
API 661 : 2015	PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
ISO 15761:2002	Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
ASTM A 181/A181M : 2014 : REDLINE	Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
ISO 16812:2007	Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
API 520-1 : 2014	SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
NAS1638:2011	CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS
API 614 : 2008	LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
ASME B16.11 : 2016	FORGED FITTINGS, SOCKET-WELDING AND THREADED
NEMA 250 : 2014	ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM)
ASME B31.3:2016	PROCESS PIPING
API std 602 : 2015	GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
API STD 600 : 2015	STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
ISO 10438-3:2007	Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems
ISO 10434:2004	Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
API 578 : 2010	GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS
ASME B1.20.1 : 2013(R2018)	PIPE THREADS, GENERAL PURPOSE (INCH)
ISO 7-1:1994	Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
API 617 : 2014	AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
API 660 : 2015	SHELL-AND-TUBE HEAT EXCHANGERS
NFPA 70 : 2017	NATIONAL ELECTRICAL CODE
API 551 : 2016	PROCESS MEASUREMENT
API 526 : 2017	FLANGED STEEL PRESSURE-RELIEF VALVES
ASTM A 105/A105M : 2014-11	SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
ASME B16.5 : 2017	PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ISO 10438-4:2007	Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems
API 686 : 2009	RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN
SAE AS 4059F : 2013	AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS
ISO 13706:2011	Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
TEMA STANDARDS : 9ED 2007	STANDARDS OF THE TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION
ISO 16889:2008	Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element
ASTM E 709 : 2015 : REDLINE	Standard Guide for Magnetic Particle Testing
AWS D1.1/D1.1M : 2015	STRUCTURAL WELDING CODE-STEEL
API 594 : 2017	CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
ASTM A 312/A312M : 2017-03	SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
ISA 18.1 : 1979	ANNUNCIATOR SEQUENCES AND SPECIFICATIONS
CEN/TR 14549:2004	Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
API 520-2 : 2015	SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION
ISO 10438-2:2007	Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems

View more information

$568.62

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

BS EN ISO 10438-1:2003

Current

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription