BS EN ISO 1461:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
Available format(s)
Hardcopy , PDF
Superseded date
21-09-2022
Language(s)
English
Published date
31-07-2009
Publisher
This International Standard specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2%of other metals). It does not apply to the following: sheet, wire and woven or welded mesh products that are continuously hot dip galvanized; tube and pipe that are hot dip galvanized in automatic plants; hot dip galvanized products (e.g. fasteners) for which specific standards exist and which might include additional requirements or requirements which are different from those of this International Standard. NOTE Individual product standards can incorporate this International Standard for the coating by quoting its number, or can incorporate it with modifications specific to the product. Different requirements can also be made for galvanized coatings on products intended to meet specific regulatory requirements. After-treatment/over-coating of hot dip galvanized articles is not covered by this International Standard.
| Committee |
STI/34
|
| DevelopmentNote |
Supersedes BS 729(1971) & 96/120933 DC. (11/2005) Supersedes 07/30174185 DC. (07/2009)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 1461 : 2009 | Identical |
| EN ISO 1461:2009 | Identical |
| ISO 1461:2009 | Identical |
| SN EN ISO 1461:2009 | Identical |
| NF EN ISO 1461 : 2009 | Identical |
| NBN EN ISO 1461 : 2009 | Identical |
| NEN EN ISO 1461 : 2009 | Identical |
| UNI EN ISO 1461 : 2009 | Identical |
| NS EN ISO 1461 : 2009 | Identical |
| I.S. EN ISO 1461:2009 | Identical |
| UNE-EN ISO 1461:2010 | Identical |
| DIN EN ISO 1461:2009-10 | Identical |
| 09/30166898 DC : 0 | BS 559 - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF SIGN INSTALLATIONS |
| 06/30139515 DC : DRAFT MAY 2006 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL FENCES |
| BS EN 1996-1-1 NA : 2005 | UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| 14/30283902 DC : 0 | BS 3288-1 - INSULATOR AND CONDUCTOR FITTINGS FOR OVERHEAD POWER LINES - PART 1: PERFORMANCE AND GENERAL REQUIREMENTS |
| BS 8612:2018 | Dry fixed ridge, hip, and verge systems for slating and tiling. Specification |
| BS 8006-2(2011) : 2011 | CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS - PART 2: SOIL NAIL DESIGN |
| 06/30139507 DC : DRAFT MAY 2006 | BS 1722-9 - FENCES - PART 9: SPECIFICATION FOR MILD STEEL (LOW CARBON STEEL) FENCES WITH ROUND OR SQUARE VERTICALS AND FLAT HORIZONTALS |
| 06/30094362 DC : DRAFT JAN 2006 | BS 4592-2 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 2: EXPANDED METAL GRATINGS - SPECIFICATION |
| BS 5516-1:2004 | Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing |
| 08/30156903 DC : DRAFT MAR 2008 | BS 3288-2 - INSULATOR AND CONDUCTOR FITTINGS FOR OVERHEAD POWER LINES - PART 2: SPECIFICATION FOR A RANGE OF INSULATOR FITTINGS |
| 06/30094360 DC : DRAFT JAN 2006 | BS 4592-1 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 1: METAL OPEN BAR GRATINGS - SPECIFICATION |
| BS 8006-1(2010) : 2010 | CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS AND OTHER FILLS |
| BS 5502-50(1993) : 1993 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 50: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND USE OF STORAGE TANKS AND RECEPTION PITS FOR LIVESTOCK SLURRY |
| BS 1722-5(2006) : 2006 | FENCES - PART 5: SPECIFICATION FOR CLOSE-BOARDED FENCES AND WOODEN PALISADE FENCES |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 1722-2:2000 | Fences Specification for strained wire and wire mesh netting fences |
| BS 1722-14:2017 | Fences Specification for open mesh steel panel |
| DEFSTAN 21-5/4(2016) : 2016 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| BS 4873:2004 | Aluminium alloy windows |
| BS 8002:2015 | Code of practice for earth retaining structures |
| BS 1722-14:2006 | Fences Specification for open mesh steel panel fences |
| BS 1722-12:2016 | Fences Steel palisade fences. Manufacturing and installation. Specification |
| BS 1722-12:1999 | Fences Specification for steel palisade fences |
| BS 1722-14:2001 | Fences Specification for open mesh steel panel fences |
| BS 1722-17:2006 | Fences Specification for electric security fences. Design, installation and maintenance |
| BS 7430(2011) : 2011 | CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
| BS 1722-12:2006 | Fences Specification for steel palisade fences |
| DEFSTAN 02-113/2(2010) : 2010 | REQUIREMENTS FOR MECHANICAL HANDLING |
| DEFSTAN 81-086/4(2017) : 2017 | FITTINGS METAL AND HANDLES FOR CONTAINERS |
| DEFSTAN 02-177/2(2002) : 2002 AMD 1 2002 | REQUIREMENTS FOR THE MANUFACTURE, TEST AND IDENTIFICATION FOR ITEMS OF SMITHS WORK |
| DEFSTAN 02-179/1(2002) : 2002 | REQUIREMENTS FOR LOCKERS (MAGAZINE, RU MAGAZINE AND DETONATOR) USED FOR STORAGE OF EXPLOSIVE STORES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 81-29/5(2014) : 2014 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| BS 1722-8:2006 | Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles |
| DEFSTAN 21-5/2(2004) : 2004 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| DEFSTAN 81-29/4(2007) : 2007 | HANDLES, WEBBING OR ROPE, WITH METAL BRACKETS OR WOOD BLOCKS FOR USE ON CONTAINERS |
| DEFSTAN 02-728/3(2010) : 2010 | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| DEFSTAN 02-113/1(2005) : 2005 | REQUIREMENT FOR MECHANICAL HANDLING |
| DEFSTAN 21-5/3(2009) : 2009 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| BS DD1722-18(2007) : 2007 | FENCES - PART 18: SPECIFICATION FOR STEEL MESH SITE PERIMETER TEMPORARY FENCING SYSTEMS |
| 17/30324405 DC : 0 | BS 8612 - DRY-FIXED RIDGE, HIP, AND VERGE SYSTEMS FOR SLATING AND TILING - SPECIFICATION |
| BS 559:2009 | Specification for the design and construction of signs for publicity, decorative and general purposes |
| 02/107760 DC : DRAFT DEC 2002 | BS 4211 - SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| 06/30094368 DC : DRAFT JAN 2006 | BS 4592-5 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 5: SOLID PLATES IN METAL AND GLASS REINFORCED PLASTICS (GRP) - SPECIFICATION |
| 08/30142158 DC : DRAFT NOV 2008 | BS 5834-2 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR GAS AND UTILITIES' PURPOSES - PART 2: SPECIFICATION FOR SURFACE BOXES |
| BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| 16/30338263 DC : 0 | BS 1722-17 - FENCES - PART 17: SPECIFICATION FOR ELECTRIC SECURITY FENCES - DESIGN, INSTALLATION AND MAINTENANCE |
| 13/30260274 DC : 0 | BS 5642-1:1978/A1 - SILLS AND COPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| 17/30359664 DC : 0 | BS 8006-2:2011+A1:2017 - CODE OF PRACTICE FOR STRENGTHENED/REINFORCED SOILS - PART 2: SOIL NAIL DESIGN |
| BS 1202-1:2002 | Specification for nails Steel nails |
| BS 4592-5:2006 | Industrial type flooring and stair treads Solid plates in metal and glass reinforced plastics (GRP). Specification |
| BS 7861-1:2007 | Strata reinforcement support system components used in coal mines Specification for rockbolting |
| BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| BS 1722-7(2006) : 2006 | FENCES - PART 7: SPECIFICATION FOR WOODEN POST AND RAIL FENCES |
| BS 5991:2006 | Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
| BS 6739:2009 | Code of practice for instrumentation in process control systems: installation design and practice |
| BS 6510:2010 | Steel-framed windows and glazed doors. Specification |
| BS 6180:1999 | Barriers in and about buildings. Code of practice |
| BS 4592-3:2006 | Industrial type flooring and stair treads Cold formed metal planks. Specification |
| BS 4592-2:2006 | Industrial type flooring and stair treads Expanded metal gratings. Specification |
| BS 6510:2005 | Steel-framed windows and glazed doors |
| BS 1722-9:2006 | Fences Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals |
| BS 3288-1:2014 | Insulator and conductor fittings for overhead power lines Performance and general requirements |
| BS 4592-1:2006 | Industrial type flooring and stair treads Metal open bar gratings. Specification |
| BS 6180:2011 | Barriers in and about buildings. Code of practice |
| BS 1722-9:2000 | Fences Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals |
| BS 5834-2:2011 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for surface boxes |
| BS 5990:2006 | Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
| BS 1722-11:2000 | Fences Specification for prefabricated wood panel fences |
| BS 1722-11(2006) : 2006 | FENCES - PART 11: SPECIFICATION FOR PREFABRICATED WOOD PANEL FENCES |
| BS 4008:2006 | Specification for cattle grids |
| BS 3288-2:2009 | Insulator and conductor fittings for overhead power lines Specification for a range of insulator fittings |
| PD 8010-2:2015+A1:2016 | Pipeline systems Subsea pipelines. Code of practice |
| BS 5395-1:2000 | Stairs, ladders and walkways Code of practice for the design, construction and maintenance of straight stairs and winders |
| BS PD8010-2(2015) : 2015 | PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| BS 7371-6(1998) : 1998 | COATINGS ON METAL FASTENERS - PART 6: SPECIFICATION FOR HOT DIPPED GALVANIZED COATINGS |
| 05/30095368 DC : DRAFT FEB 2005 | BS 6150 - PAINTING OF BUILDINGS - CODE OF PRACTICE |
| BS PAS 51(2004) : 2004 | GUIDE TO INDUSTRY BEST PRACTICE FOR ORGANIZING OUTDOOR EVENTS |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| NACE SP 04 92 : 2016 | METALLURGICAL AND INSPECTION REQUIREMENTS FOR OFFSHORE PIPELINE BRACELET ANODES |
| 10/30218892 DC : DRAFT SEP 2010 | BS 7371-6 AMD1 - COATINGS ON METAL FASTENERS - PART 6: SPECIFICATION FOR HOT DIPPED GALVANIZED COATINGS |
| 16/30270371 DC : 0 | BS 9101 - STEEL AND ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| 07/30163374 DC : DRAFT MAR 2007 | BS 7861-1 - STRATA REINFORCEMENT SUPPORT SYSTEM COMPONENTS USED IN COAL MINES - PART 1: SPECIFICATION FOR ROCKBOLTING |
| BS PAS 47(2003) : 2003 | ELECTRIC SECURITY FENCES - DESIGN, INSTALLATION AND MAINTENANCE - SPECIFICATION |
| BS 5502-21:1990 | Buildings and structures for agriculture Code of practice for selection and use of construction materials |
| 06/30139509 DC : DRAFT MAY 2006 | BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH |
| 08/30136724 DC : DRAFT MAY 2008 | BS 6739 - CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS - INSTALLATION DESIGN AND PRACTICE |
| BS 9124:2008 | Specification for steel and aluminium access cover systems with over 1 m clear opening |
| 06/30094364 DC : DRAFT JAN 2006 | BS 4592-3 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 3: COLD FORMED METAL PLANKS - SPECIFICATION |
| BS 8081:2015 | CODE OF PRACTICE FOR GROUTED ANCHORS |
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
| BS 1703:2005 | Refuse chutes and hoppers. Specification |
| 07/30172431 DC : DRAFT OCT 2007 | BS 4211 AMD1 - SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| 10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
| NACE SP 03 87 : 2015 | METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST GALVANIC ANODES FOR OFFSHORE APPLICATIONS |
| BS 8610:2017 | Personal fall protection equipment. Anchor systems. Specification |
| 04/30100932 DC : DRAFT AUG 2004 | BS 6510 - STEEL-FRAMED WINDOWS AND GLAZED DOORS |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
| BS 1722-17:2017 | Fences Specification for electric security fences. Design, installation and maintenance |
| 17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
| 04/30085945 DC : DRAFT NOV 2004 | BS 1703 - REFUSE CHUTES AND HOPPERS - SPECIFICATION |
| 07/30151811 DC : 0 | BS 9124 - SPECIFICATION FOR STEEL AND ALUMINIUM ACCESS COVER SYSTEMS WITH OVER 1M CLEAR OPENING |
| 16/30325063 DC : 0 | BS 1722-12 - FENCES - PART 12: STEEL PALISADE FENCES - MANUFACTURING AND INSTALLATION - SPECIFICATION |
| BIP 2198 : 2012 | CONCISE EUROCODE FOR DESIGN OF TIMBER STRUCTURES: BS EN 1995: EUROCODES 5 |
| BS 9101:2017 | Steel and aluminium rainwater systems. Specification |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| 15/30301518 DC : 0 | BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
| BS 5709:2001 | Gaps, gates and stiles. Specification |
| BS 4211(2005) : 2005 | SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 1722-2:2006 | Fences Specification for strained wire and wire mesh netting fences |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| ISO 3549:1995 | Zinc dust pigments for paints — Specifications and test methods |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 752:2004 | Zinc ingots |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| EN 746-4 : 2000 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 4: PARTICULAR REQUIREMENTS FOR HOT DIP GALVANIZING THERMOPROCESSING EQUIPMENT |
| EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| EN 13283:2002 | Zinc and zinc alloys - Secondary zinc |
| EN 1179:2003 | Zinc an zinc alloys - Primary zinc |
| ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing |
| EN 10163-3:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 1460:1992 | Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| ISO 6988:1985 | Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture |
$407.85
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.