|
ASTM D 422 : 1963 : R2002 : EDT 1
|
Standard Test Method for Particle-Size Analysis of Soils |
|
ISO 17313:2004
|
Soil quality Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter |
|
ISO/TS 17892-2:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 2: Determination of density of fine-grained soil |
|
ISO 19901-6:2009
|
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
|
ASTM D 5731 : 2016 : REDLINE
|
Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
|
ISO 19900:2013
|
Petroleum and natural gas industries General requirements for offshore structures |
|
ASTM D 5334 : 2014 : REDLINE
|
Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
|
GOST 25100 : 2011
|
SOILS - CLASSIFICATION |
|
ISO 13628-1:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
|
ISO/TS 17892-8:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test |
|
ISO/TS 17892-9:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 9: Consolidated triaxial compression tests on water-saturated soils |
|
BS 1377-7:1990 (published 1994-11)
|
Methods of test for soils for civil engineering purposes Shear strength tests (total stress) |
|
ISO/TS 17892-4:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution |
|
ASTM D 5550 : 2014 : REDLINE
|
Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
|
ISO 10693:1995
|
Soil quality Determination of carbonate content Volumetric method |
|
ISO 14688-1:2002
|
Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description |
|
ISO/TS 17892-3:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 3: Determination of particle density Pycnometer method |
|
IMCA S 015 : MAR 2011
|
GUIDELINES FOR GNSS POSITIONING IN THE OIL & GAS INDUSTRY |
|
ASTM D 4648 : 2005
|
Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil |
|
ASTM D 3740 : 2012-06
|
PRACTICE FOR MINIMUM REQUIREMENTS FOR AGENCIES ENGAGED IN TESTING AND/OR INSPECTION OF SOIL AND ROCK AS USED IN ENGINEERING DESIGN AND CONSTRUCTION |
|
ISO 31000:2009
|
Risk management Principles and guidelines |
|
IEC 61892-7:2014
|
Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas |
|
ASTM D 5856 : 2015 : REDLINE
|
Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter |
|
ASTM D 6528 : 2017
|
Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils |
|
ISO/TS 22475-2:2006
|
Geotechnical investigation and testing Sampling methods and groundwater measurements Part 2: Qualification criteria for enterprises and personnel |
|
ASTM D 4373 : 2014 : REDLINE
|
Standard Test Method for Rapid Determination of Carbonate Content of Soils |
|
ISO 22476-1:2012
|
Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test |
|
IMO IF110 : 2014 SUPP 2016
|
SOLAS CONSOLIDATED EDITION |
|
IMO IB117 : 2010
|
INTERNATIONAL SAFETY MANAGEMENT CODE (ISM CODE) AND GUIDELINES ON IMPLEMENTATION OF THE ISM CODE |
|
ISO/TS 17892-10:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests |
|
ASTM D 3080 : 2004
|
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
|
ISO 19903:2006
|
Petroleum and natural gas industries Fixed concrete offshore structures |
|
ASTM D 854 : 2014 : REDLINE
|
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer |
|
ASTM D 4611 : 2016 : REDLINE
|
Standard Test Method for Specific Heat of Rock and Soil |
|
ISO/TS 17892-1:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content |
|
IMO ID520 : 2011
|
MARPOL CONSOLIDATED EDITION |
|
ISO/TR 14685:2001
|
Hydrometric determinations Geophysical logging of boreholes for hydrogeological purposes Considerations and guidelines for making measurements |
|
ISO 19904-1:2006
|
Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
|
ISO 19901-4:2016
|
Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations |
|
ISO 22475-1:2006
|
Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution |
|
ASTM D 420 : 1998
|
Guide to Site Characterization for Engineering, Design, and Construction Purposes |
|
ISO 14689-1:2003
|
Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description |
|
BS 1377-3:1990
|
METHODS OF TEST FOR SOILS FOR CIVIL ENGINEERING PURPOSES - PART 3: CHEMICAL AND ELECTRO-CHEMICAL TESTS |
|
ISO 19902:2007
|
Petroleum and natural gas industries Fixed steel offshore structures |
|
ISO 19906:2010
|
Petroleum and natural gas industries Arctic offshore structures |
|
ISO/TS 17892-11:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 11: Determination of permeability by constant and falling head |
|
ISO 14688-2:2004
|
Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification |
|
ASTM D 5778 : 2012 : REDLINE
|
Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils |
|
ASTM D 4254 : 2016 : REDLINE
|
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
|
ISO/TS 17892-12:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of Atterberg limits |
|
EN 1997-2:2007/AC:2010
|
EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING |
|
ASTM D 2974 : 2014 : REDLINE
|
Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
|
ASTM D 5607 : 2016 : REDLINE
|
Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
|
ISO 10012:2003
|
Measurement management systems — Requirements for measurement processes and measuring equipment |
|
ASTM D 2850 : 2015 : REDLINE
|
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
|
ISO/TS 17892-6:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test |
|
ISO/TS 22475-3:2007
|
Geotechnical investigation and testing Sampling methods and groundwater measurements Part 3: Conformity assessment of enterprises and personnel by third party |
|
ASTM D 2435 : 2004
|
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
|
ISO 9000:2015
|
Quality management systems Fundamentals and vocabulary |
|
ISO 10694:1995
|
Soil quality Determination of organic and total carbon after dry combustion (elementary analysis) |
|
ASTM D 7181 : 2011
|
Method for Consolidated Drained Triaxial Compression Test for Soils |
|
NS 4737 : 1ED 1976
|
WATER ANALYSIS - DETERMINATION OF SULPHIDE CONTENT OF WASTE WATER - COLORIMETRIC METHOD |
|
ASTM D 7070 : 2016 : REDLINE
|
Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
|
EN 1997-1:2004/A1:2013
|
EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
|
ISO/TS 17892-7:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 7: Unconfined compression test on fine-grained soils |
|
IMO IC117 : 2014
|
ISM CODE AND GUIDELINES |
|
ASTM D 4253 : 2016 : REDLINE
|
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
|
ASTM D 3967 : 2016 : REDLINE
|
Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens |
|
ASTM D 4452 : 2014 : REDLINE
|
Standard Practice for X-Ray Radiography of Soil Samples |
|
ISO 19905-1:2016
|
Petroleum and natural gas industries Site-specific assessment of mobile offshore units Part 1: Jack-ups |
|
ISO 17312:2005
|
Soil quality Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter |
|
ASTM D 6913 : 2004 : EDT 2
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
|
ASTM D 4767 : 2011 : REDLINE
|
Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
|
IMO I116 : 2003
|
INTERNATIONAL SHIP AND PORT FACILITY SECURITY (ISPS) CODE |
|
ISO/TS 17892-5:2004
|
Geotechnical investigation and testing Laboratory testing of soil Part 5: Incremental loading oedometer test |
|
ISO 13623:2017
|
Petroleum and natural gas industries — Pipeline transportation systems |
|
GOST 20522 : 2012
|
SOILS - METHODS OF STATISTICAL TREATMENT OF TEST RESULTS |
|
ASTM D 4542 : 2015 : REDLINE
|
Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer |