Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN ISO 8178-5:1997

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
Available format(s)

Hardcopy , PDF

Superseded date

30-06-2009

Language(s)

English

Published date

15-08-1999

Defines fuels recommended for performance of the exhaust emission test cycles as defined in ISO 8178-4. Applies to reciprocating internal combustion engines for mobile, transportable and stationary installations, not including engines for motor vehicles mainly intended for road use. Applicable to engines such as earth-moving machines, generating sets and other uses.

Committee
MCE/14
DevelopmentNote
Supersedes 94/714926 DC (06/2005)
DocumentType
Standard
Pages
42
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

ISO 3016:1994 Petroleum products Determination of pour point
ISO 2719:2016 Determination of flash point Pensky-Martens closed cup method
ISO 3993:1984 Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method
EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
ISO 5164:2014 Petroleum products Determination of knock characteristics of motor fuels Research method
ISO 8691:1994 Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing
EN 41 : 1975 DETERMINATION OF THE SULFUR CONTENT OF PETROLEUM PRODUCTS BY THE WICKBOLD COMBUSTION METHOD
EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
IP 364 : 1984 CALCULATED CETANE INDEX OF DIESEL FUELS
ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
ASTM D 189 : 2006 : EDT 1 Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM D 3244 : 2016-06 PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS
EN ISO 3104:1996 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
ISO 4264:2007 Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation
DIN 51413-7:1990-05 TESTING OF LIQUID MINERAL OIL HYDROCARBONS - ANALYSIS BY GAS CHROMATOGRAPHY - DETERMINATION OF OXYGENATES AND THE OXYGEN CONTENT - PROCEDURE BY OXYGEN-SPECIFIC DETECTOR (O-FID)
ISO 5165:1998 Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method
EN ISO 6326-5:1997 Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989)
ISO 3837:1993 Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method
EN ISO 6246:2017 Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017)
EN ISO 3993:1995 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984)
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
ISO 8178-1:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 7536:1994 Petroleum products — Determination of oxidation stability of gasoline — Induction period method
ISO 3007:1999 Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
EN 24260:1994 Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method (ISO 4260:1987)
ISO 8754:2003 Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometry
ISO 3735:1999 Crude petroleum and fuel oils Determination of sediment Extraction method
ISO 4260:1987 Petroleum products and hydrocarbons Determination of sulfur content Wickbold combustion method
EN 238:1996/A1:2003 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY
EN 25163 : 1993 MOTOR AND AVIATION TYPE FUELS - DETERMINATION OF KNOCK CHARACTERISTICS - MOTOR METHOD
ISO 10478:1994 Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods
EN ISO 8178-1 : 1996 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS
ISO 7941:1988 Commercial propane and butane Analysis by gas chromatography
ISO 2160:1998 Petroleum products Corrosiveness to copper Copper strip test
EN 12 : 1993 PETROLEUM PRODUCTS - DETERMINATION OF REID VAPOUR PRESSURE - WET METHOD
EN ISO 10370:2014 Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014)
ISO 8216-1:2017 Petroleum products Fuels (class F) classification Part 1: Categories of marine fuels
ISO 6615:1993 Petroleum products Determination of carbon residue Conradson method
ASTM D 86 : 2017-06 TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
ISO 8217:2017 Petroleum products Fuels (class F) Specifications of marine fuels
EN ISO 3735:1999 Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999)
EN 589:2008+A1:2012 Automotive fuels - LPG - Requirements and test methods
ISO 5163:2014 Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method
ASTM D 4530 : 2015 : REDLINE Standard Test Method for Determination of Carbon Residue (Micro Method)
ISO 10370:2014 Petroleum products — Determination of carbon residue — Micro method
ASTM D 2785 : 1980 Method of Test for Trace Quantities of Total Sulfur (Wickbold and Beckman Combustion Apparatus) (Withdrawn 1987)
ASTM D 2598 : 2016 : REDLINE Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM D 4420 : 1994 Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography)
ISO 3733:1999 Petroleum products and bituminous materials — Determination of water — Distillation method
EN 27941:1993 Commercial propane and butane - Analysis by gas chromatography (ISO 7941:1988)
ISO 6245:2001 Petroleum products — Determination of ash
ISO 6246:2017 Petroleum products — Gum content of fuels — Jet evaporation method
ISO 6296:2000 Petroleum products Determination of water Potentiometric Karl Fischer titration method
ISO 4259:2006 Petroleum products Determination and application of precision data in relation to methods of test
ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
EN ISO 6245:2002 Petroleum products - Determination of ash (ISO 6245:2001)
EN ISO 7536 : 1996 Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994)
ISO 3830:1993 Petroleum products Determination of lead content of gasoline Iodine monochloride method
ISO 8973:1997 Liquefied petroleum gases — Calculation method for density and vapour pressure
ASTM D 3237 : 2017 : REDLINE Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
EN 23015:1994 Petroleum products - Determination of cloud point (ISO 3015:1992)
ISO 4256:1996 Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method
ASTM D 5186 : 2015 : REDLINE TEST METHOD FOR DETERMINATION OF THE AROMATIC CONTENT AND POLYNUCLEAR AROMATIC CONTENT OF DIESEL FUELS AND AVIATION TURBINE FUELS BY SUPERCRITICAL FLUID CHROMATOGRAPHY
EN 7 : 1974 DETERMINATION OF ASH FROM PETROLEUM PRODUCTS
EN 22719 : 1993 PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
ISO 3405:2011 Petroleum products Determination of distillation characteristics at atmospheric pressure
ISO 6326-5:1989 Natural gas Determination of sulfur compounds Part 5: Lingener combustion method
ISO 3105:1994 Glass capillary kinematic viscometers — Specifications and operating instructions
EN ISO 4256:1998 Liquefied petroleum gases - Determination of gauge pressure - LPG method (ISO 4256:1996)
ASTM D 2622 : 2016 : REDLINE Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ISO 4262:1993 Petroleum products Determination of carbon residue Ramsbottom method
ASTM D 3341 : 2016 : REDLINE Standard Test Method for Lead in Gasoline—Iodine Monochloride Method
ASTM D 2274 : 2014 : REDLINE Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 1744 : 2013 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016)
EN 25164 : 1993 MOTOR FUELS - DETERMINATION OF KNOCK CHARACTERISTICS - RESEARCH METHOD
ISO 3015:1992 Petroleum products — Determination of cloud point
EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003)
ISO 6974:1984 Natural gas — Determination of hydrogen, inert gases and hydrocarbons up to C8 — Gas chromatographic method

View more information
$478.43
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more