BS ISO 13577-3:2016
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
30-09-2016
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and measures
5 Additional requirements for the generation
of atmosphere gases
6 Verification of the safety requirements and/or
measures
7 Information for use
Annex A (informative) - List of significant hazards
Annex B (informative) - Typical protective and
reactive atmosphere gases
Annex C (normative) - Allowed maximum pressure
Annex D (informative) - Principle procedures for
the change of atmosphere
Annex E (informative) - Examples for the determination
of safety integrity level SIL and performance level
PL using the risk graph method
Annex F (informative) - Basic configuration of piping
system of TPE using protective or reactive
atmosphere gases
Annex G (normative) - Requirements specific to Japan
Annex H (normative) - Requirements specific to the USA
Annex I (normative) - Requirements specific to
European countries
Annex J (informative) - Overview of the terms defined
in ISO 13574 (Vocabulary)
Bibliography
Describes safety requirements for generation and use of protective and reactive atmosphere gases that are part of industrial thermo-processing equipment (TPE).
Committee |
RHE/13
|
DevelopmentNote |
Supersedes 14/30283312 DC. (10/2016)
|
DocumentType |
Standard
|
Pages |
78
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
ISO 13577-3:2016 | Identical |
EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
ASME B31.1 : 2016 | POWER PIPING |
IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
ISO 23551-4:2005 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves |
ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
ASME B31.3:2016 | PROCESS PIPING |
IEC 60730-2-6:2015 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 13574:2015 | Industrial furnaces and associated processing equipment — Vocabulary |
ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
IEC 61511-3:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
NFPA 86 : 2015 | OVENS AND FURNACES |
ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
ISO 19879:2010 | Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
ISO 23551-1:2012 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
ISO 23551-2:2006 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 2: Pressure regulators |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
EN 10241:2000 | Steel threaded pipe fittings |
IEC 61511-2:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016 |
ISO 22968:2010 | Forced draught oil burners |
IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
EN 751-1:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
ISO 13577-1:2016 | Industrial furnaces and associated processing equipment Safety Part 1: General requirements |
EN 14382:2005+A1:2009/AC:2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
EN 10242:1994/A2:2003 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 13577-4:2014 | Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems |
EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
ISO 22967:2010 | Forced draught gas burners |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.