Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS ISO 3534-2:2006

Current
Current

The latest, up-to-date edition.

Statistics. Vocabulary and symbols Applied statistics
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-11-2006

Foreword
Scope
1 Data generation and collection
   1.1 Systems of reference values for characteristics
   1.2 Sources of data
   1.3 Types of sampling
2 Statistical process management
   2.1 General process related concepts
   2.2 Variation-related concepts
   2.3 Control-related charts
   2.4 Control chart components
   2.5 Fundamental terms related to process performance and
        process capability
   2.6 Process performance (measured data)
   2.7 Process capability (measured data)
3 Specifications, values and test results
   3.1 Specification-related concepts
   3.2 Determination of characteristics and quantities
   3.3 Properties of test and measurement methods
   3.4 Properties of test and measurement results
   3.5 Capability of detection
4 Inspection and general acceptance sampling
   4.1 Types of inspection
   4.2 Types of acceptance sampling inspection
   4.3 Acceptance sampling inspection system aspects
   4.4 Acceptance criteria
   4.5 Types of operating characteristic curves
   4.6 Terms relating to operating characteristics
   4.7 Outgoing quality concepts and average inspection effort
5 Sampling of bulk materials
   5.1 Concepts related to bulk materials
   5.2 Bulk sampling aspects
   5.3 Bulk sample preparation
   5.4 Procedural aspects
Annex A (normative) Symbols and abbreviated terms
Annex B (informative) Methodology used to develop the vocabulary
Bibliography
Symbols list
Alphabetical index
French alphabetical index (Index alphabétique)

Defines applied statistics terms, and expresses them in a conceptual framework in accordance with ISO normative terminology practice.

This part of ISO3534 defines applied statistics terms, and expresses them in a conceptual framework in accordance with ISO normative terminology practice. Term entries are arranged thematically. An alphabetical index is provided. Standardized symbols and abbreviations are defined.

It has been recognized that the acceptance of applied statistics as a means to improving the effectiveness and efficiency of organizations has been hampered by the complexity and confusion introduced by conflicting designation and usage of terms, definitions, abbreviations and symbols.

The two principal purposes of this part of ISO3534 are, specifically, to establish a common vocabulary for use throughout ISO/TC69 standards, together with the broader intent to enhance the preciseness, clarity and cohesiveness in the usage/application of applied statistics generally. The mathematical level has deliberately been kept to a low level in order for the content to be made readily comprehensible to the widest possible readership.

ISO3534-1 and ISO3534-2 are intended to be compatible. However, ISO3534-1, on terms used in probability and statistics, is foundational; so, by necessity, it is presented at a more sophisticated mathematical level than ISO3534-2. As users of this part of ISO3534 on applied statistics may occasionally consult ISO3534-1 for certain terms, copious notes and examples in ISO3534-1 follow selected terms providing colloquial explanations of formal terms.

Committee
SS/1
DevelopmentNote
Supersedes 86/63300 DC. (03/2005) Supersedes 04/30117245 DC (11/2006)
DocumentType
Standard
Pages
134
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
ISO 3534-2:2006 Identical

03/102301 DC : DRAFT NOV 2003 BS 6000-1 - GUIDE TO THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 1: GENERAL GUIDE TO ACCEPTANCE SAMPLING
BS 6000-2:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots Guide to sampling by attributes
BS 6002-3:2005 Sampling procedures for inspection by variables Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
03/102303 DC : DRAFT NOV 2003 BS 6000-3 - GUIDE TO THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: GUIDE TO SAMPLING BY VARIABLES
BS 6002-2:2007 Sampling procedures for inspection by variables General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS 7782:1994 Control charts. General guide and introduction
BS EN 61358:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
15/30286921 DC : 0 BS 5700 - GUIDE TO THE SELECTION OF CHARTING METHODS AND CAPABILITY ASSESSMENT FOR USE IN STATISTICAL PROCESS CONTROL
BS 5702-3:2008 Guide to statistical process control (SPC) charts for variables Charting techniques for short runs and small mixed batches
BS 5701-3:2003 Guide to quality control and performance improvement using qualitative (attribute) data Technical aspects of attribute charting. Special situation handling
BS 6165:2002 Specification for small disposable fire extinguishers of the aerosol type
BS 5700:2015 Guide to the selection of charting methods and capability assessment for use in statistical process control
DEFSTAN 05-71(PT2)/1(2006) : 2006 ACCEPTANCE SAMPLING PROCEDURES FOR PROOF WITH RESPECT TO RECTANGULAR REFERENCE TARGETS - PART 2: ACCURACY PROOF - SINGLE SAMPLING PLANS FOR INDEPENDENT DISTURBANCES IN AZIMUTH AND ELEVATION
DEFSTAN 05-58(PT1)/1(2006) : 2006 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES OF ISOLATED LOTS
DEFSTAN 05-71(PT1)/2(2006) : 2006 ACCEPTANCE SAMPLING PROCEDURES FOR PROOF WITH RESPECT TO RECTANGULAR REFERENCE TARGETS - PART 1: CONSISTENCY PROOF - SINGLE SAMPLING PLANS FOR INDEPENDENT DISTURBANCES IN AZIMUTH AND ELEVATION
BS ISO 11095:1996 Linear calibration using reference materials
BS 6000-1:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots General guide to acceptance sampling
03/102302 DC : DRAFT NOV 2003 BS 6000-2 - GUIDE TO THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 2: GUIDE TO SAMPLING BY ATTRIBUTES
BS 5701-4:2003 Guide to quality control and performance improvement using qualitative (attribute) data Attribute inspection performance control and improvement
BS 5702-2:2008 Guide to statistical process control (SPC) charts for variables Charts for individual values
BS 6001-9:2002 Sampling procedures for inspection by attributes Double sampling plans using minimal sample sizes, indexed by producer\'s risk quality (PRQ) and consumer\'s risk quality (CRQ)
BS 6000:1996 Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
BS 5703-2:2003 Guide to data analysis and quality control using cusum techniques Introduction to decision-making using cusum techniques
BS 6002-1:2007 Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS 5703-4:2003 Guide to data analysis and quality control using cusum techniques Cusum methods for discrete (count/classified) data
BS 5703-1:2003 Guide to data analysis and quality control using cusum techniques Uses and value of cusum charts in business, industry, commerce and public service
BS 5703-3:2003 Guide to data analysis and quality control using cusum techniques Cusum methods for process/quality control using measured data
BS 7802:1995 Glossary of terms used in operational research
05/30126058 DC : DRAFT NOV 2005 BS 5702-2 - GUIDE TO STATISTICAL PROCESS CONTROL CHARTS FOR VARIABLES - PART 2: CHARTS FOR INDIVIDUAL VALUES
BS 6001-4:1994 Sampling procedures for inspection by attributes Specification for sequential sampling plans
03/102300 DC : DRAFT NOV 2003 BS 6002-3 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 3: DOUBLE SAMPLING PLANS INDEXED BY AQL
05/30134584 DC : DRAFT JUN 2005 BS 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS
BS 5702-1:2001 Guide to statistical process control (SPC) charts for variables Charts for mean, median, range and standard deviation
03/102261 DC : 0 BS 5702-3 - GUIDE TO STATISTICAL PROCESS CONTROL CHARTS FOR VARIABLES - PART 3: CHARTING TECHNIQUES FOR SHORT PRODUCTION RUNS AND SMALL MIXED BATCHES
05/30134582 DC : DRAFT JUN 2005 BS 6002-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL
BS 5701-1:2003 Guide to quality control and performance improvement using qualitative (attribute) data Uses and value of attribute charts in business, industry, commerce and public service
BS 6002-4.1:1994 Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation
BS 5191:2004 Production planning and control. Vocabulary
02/400740 DC : DRAFT SEP 2002 BS 5191 - VOCABULARY OF PRODUCTION PLANNING AND CONTROL TERMS
BS 5701-2:2003 Guide to quality control and performance improvement using qualitative (attribute) data Fundamentals of standard attribute charting for monitoring, control and improvement
BS PD6532-1(1993) : 1993 REFERENCE MATERIALS - GUIDE TO TERMS AND DEFINITIONS USED IN CONNECTION WITH REFERENCE MATERIALS
BS EN ISO 8402:1995 Quality management and quality assurance. Vocabulary
BS 6001-7:2001 Sampling procedures for inspection by attributes Credit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection
BS 6000-3:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots Guide to sampling by variables
BS 6002-1:1993 Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
BS EN 3380:1996 Rings, retaining. Technical specification

ISO 10241:1992 International terminology standards Preparation and layout
ISO 3951-1:2013 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
ISO 2859-4:2002 Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels
ISO 2859-3:2005 Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
ISO 31-11:1992 Quantities and units Part 11: Mathematical signs and symbols for use in the physical sciences and technology
ISO 2859-2:1985 Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO 31-0:1992 Quantities and units Part 0: General principles
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
ISO 8601:2004 Data elements and interchange formats Information interchange Representation of dates and times
ISO 2859-10:2006 Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
ISO 3951-3:2007 Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 3534-3:2013 Statistics — Vocabulary and symbols — Part 3: Design of experiments
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO/IEC Guide 2:2004 Standardization and related activities General vocabulary
ISO 704:2009 Terminology work — Principles and methods
ISO 3951-5:2006 Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
ISO 2859-5:2005 Sampling procedures for inspection by attributes Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 3951-2:2013 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability

View more information
$733.34
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more