BS ISO 8068:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
12-10-2019
English
29-12-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Sampling
4 Requirements for turbine oils
5 Specification tables
Bibliography
Describes the minimum requirements for turbine lubricants, as delivered. It specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turbines, combined-cycle turbines with a common lubrication system and hydraulic (water driven) turbines.
Committee |
PTI/7
|
DevelopmentNote |
Supersedes 05/30098184 DC (12/2006)
|
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO 8068:2006 | Identical |
ISO 6743-5:2006 | Lubricants, industrial oils and related products (class L) Classification Part 5: Family T (Turbines) |
ISO 3016:1994 | Petroleum products Determination of pour point |
ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
ISO 20764:2003 | Petroleum and related products Preparation of a test portion of high-boiling liquids for the determination of water content Nitrogen purge method |
ISO 14593:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test) |
ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
ISO 9439:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
ISO 6743-6:1990 | Lubricants, industrial oils and related products (class L) Classification Part 6: Family C (Gears) |
ISO 7624:1997 | Petroleum products and lubricants — Inhibited mineral turbine oils — Determination of oxidation stability |
ISO 6341:2012 | Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) — Acute toxicity test |
ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
ISO 7537:1997 | Petroleum products — Determination of acid number — Semi-micro colour-indicator titration method |
ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
ISO 15380:2016 | Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
DIN 51554-3:1978-09 | TESTING OF MINERAL OILS; TEST OF SUSCEPTIBILITY TO AGEING ACCORDING TO BAADER; TESTING AT 95 DEGREE C |
ISO 20823:2003 | Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test |
ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
EN 14832:2005 | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
EN 14833:2005 | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
ASTM D 2711 : 2017 : REDLINE | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
ISO 12925-1:1996 | Lubricants, industrial oils and related products (class L) Family C (Gears) Part 1: Specifications for lubricants for enclosed gear systems |
ISO 8192:2007 | Water quality Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation |
ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
ISO 14935:1998 | Petroleum and related products Determination of wick flame persistence of fire-resistant fluids |
ISO 6619:1988 | Petroleum products and lubricants — Neutralization number — Potentiometric titration method |
ISO 7346-2:1996 | Water quality Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] Part 2: Semi-static method |
ISO 760:1978 | Determination of water Karl Fischer method (General method) |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.