BS ISO 8178-5:2008
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
Available format(s)
Hardcopy , PDF
Superseded date
30-11-2015
Language(s)
English
Published date
30-06-2009
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Choice of fuel
5.1 General
5.2 Influence of fuel properties on emissions from
compression ignition engines
5.3 Influence of fuel properties on emissions from
spark ignition engines
6 Overview of fuels
6.1 Natural gas
6.2 Liquefied petroleum gas
6.3 Motor gasolines
6.4 Diesel fuels
6.5 Distillate fuel oils
6.6 Residual fuel oils
6.7 Crude oil
6.8 Alternative fuels
6.9 Requirements and additional information
Annex A (informative) - Calculation of the fuel specific factors
Annex B (informative) - Equivalent non-ISO test methods
Annex C (informative) - Organizations capable of providing
specifications for commercial fuels
Bibliography
Describes fuels whose use is recommended for performing the exhaust emission test cycles given in ISO 8178-4 and ISO 8178-11.
| Committee |
MCE/14/-/3
|
| DevelopmentNote |
Supersedes BS EN ISO 8178-5 & 05/30136736 DC. (06/2009)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 8178-5:2015 | Identical |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 2719:2016 | Determination of flash point Pensky-Martens closed cup method |
| ISO 3993:1984 | Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method |
| EN 237:2004 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| ISO 5164:2014 | Petroleum products Determination of knock characteristics of motor fuels Research method |
| ISO 8691:1994 | Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing |
| CFR 40(PTS86-99) : JUL 94 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| EN 1601:2017 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| EN 12177:1998/AC:2000 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF BENZENE CONTENT BY GAS CHROMATOGRAPHY |
| ISO 10307-1:2009 | Petroleum products Total sediment in residual fuel oils Part 1: Determination by hot filtration |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| IP 364 : 1984 | CALCULATED CETANE INDEX OF DIESEL FUELS |
| ISO 22854:2016 | Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel Multidimensional gas chromatography method |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ASTM D 189 : 2006 : EDT 1 | Standard Test Method for Conradson Carbon Residue of Petroleum Products |
| ASTM D 3244 : 2016-06 | PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS |
| ISO 4264:2007 | Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation |
| ISO 1998-6:2000 | Petroleum industry — Terminology — Part 6: Measurement |
| ISO 5165:1998 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
| ISO 3837:1993 | Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| ISO 7536:1994 | Petroleum products — Determination of oxidation stability of gasoline — Induction period method |
| ISO 3007:1999 | Petroleum products and crude petroleum — Determination of vapour pressure — Reid method |
| EN 24260:1994 | Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method (ISO 4260:1987) |
| ISO 8754:2003 | Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometry |
| ISO 3735:1999 | Crude petroleum and fuel oils Determination of sediment Extraction method |
| ISO 4260:1987 | Petroleum products and hydrocarbons Determination of sulfur content Wickbold combustion method |
| EN 238:1996/A1:2003 | LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY |
| ISO 6251:1996 | Liquefied petroleum gases — Corrosiveness to copper — Copper strip test |
| ISO 10478:1994 | Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods |
| ISO 7941:1988 | Commercial propane and butane Analysis by gas chromatography |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| CFR 40(PTS790-999) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| ISO 8216-1:2017 | Petroleum products Fuels (class F) classification Part 1: Categories of marine fuels |
| ISO 6615:1993 | Petroleum products Determination of carbon residue Conradson method |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| ISO 8217:2017 | Petroleum products Fuels (class F) Specifications of marine fuels |
| ASTM D 3343 : 2016 : REDLINE | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
| ISO 1998-99:2000 | Petroleum industry — Terminology — Part 99: General and index |
| EN 589:2008+A1:2012 | Automotive fuels - LPG - Requirements and test methods |
| ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
| ISO 1998-2:1998 | Petroleum industry Terminology Part 2: Properties and tests |
| ASTM D 4530 : 2015 : REDLINE | Standard Test Method for Determination of Carbon Residue (Micro Method) |
| ISO 10370:2014 | Petroleum products — Determination of carbon residue — Micro method |
| ISO 1998-1:1998 | Petroleum industry Terminology Part 1: Raw materials and products |
| ASTM D 5580 : 2015 : REDLINE | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
| ASTM D 2598 : 2016 : REDLINE | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
| ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
| ISO 1998-7:1998 | Petroleum industry Terminology Part 7: Miscellaneous terms |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO 10307-2:2009 | Petroleum products Total sediment in residual fuel oils Part 2: Determination using standard procedures for ageing |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| ISO 6246:2017 | Petroleum products — Gum content of fuels — Jet evaporation method |
| ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| ISO 14597:1997 | Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ISO 3830:1993 | Petroleum products Determination of lead content of gasoline Iodine monochloride method |
| ISO 8973:1997 | Liquefied petroleum gases — Calculation method for density and vapour pressure |
| ASTM D 3237 : 2017 : REDLINE | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
| ISO 4256:1996 | Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method |
| ISO 1998-4:1998 | Petroleum industry Terminology Part 4: Refining |
| ASTM D 5186 : 2015 : REDLINE | TEST METHOD FOR DETERMINATION OF THE AROMATIC CONTENT AND POLYNUCLEAR AROMATIC CONTENT OF DIESEL FUELS AND AVIATION TURBINE FUELS BY SUPERCRITICAL FLUID CHROMATOGRAPHY |
| ISO 8178-4:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| ISO 6326-5:1989 | Natural gas Determination of sulfur compounds Part 5: Lingener combustion method |
| ISO 13757:1996 | Liquefied petroleum gases — Determination of oily residues — High-temperature method |
| ISO 14596:2007 | Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry |
| ISO 8819:1993 | Liquefied petroleum gases Detection of hydrogen sulfide Lead acetate method |
| ISO 8178-11:2006 | Reciprocating internal combustion engines Exhaust emission measurement Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions |
| ISO 1998-3:1998 | Petroleum industry Terminology Part 3: Exploration and production |
| ISO 3105:1994 | Glass capillary kinematic viscometers — Specifications and operating instructions |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ISO 4262:1993 | Petroleum products Determination of carbon residue Ramsbottom method |
| ASTM D 1838 : 2016 : REDLINE | Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases |
| ASTM D 3341 : 2016 : REDLINE | Standard Test Method for Lead in Gasoline—Iodine Monochloride Method |
| ASTM D 2274 : 2014 : REDLINE | Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) |
| ASTM D 1945 : 2014 : REDLINE | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ISO 3015:1992 | Petroleum products — Determination of cloud point |
| ASTM D 5191 : 2015-10 | TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD) |
$541.18
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.