ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
|
ISO 13785-1:2002
|
Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
|
ISO 5658-2:2006
|
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
|
ISO 13784-2:2002
|
Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms
|
ISO 10093:1998
|
Plastics Fire tests Standard ignition sources
|
ISO 9705:1993
|
Fire tests Full-scale room test for surface products
|
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
|
ISO 5657:1997
|
Reaction to fire tests Ignitability of building products using a radiant heat source
|
ISO 5659-2:2017
|
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
ISO 5660-2:2002
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
|
ISO 12992:2017
|
Plastics — Vertical flame spread determination for film and sheet
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
ISO 5658-4:2001
|
Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
|
ISO/TR 14696:1999
|
Reaction to fire tests Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
|
ISO 13785-2:2002
|
Reaction-to-fire tests for façades — Part 2: Large-scale test
|
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test
|
ISO/IEC Guide 52:1990
|
Glossary of fire terms and definitions
|
ISO 11925-3:1997
|
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test
|
ISO/TR 11696-1:1999
|
Uses of reaction to fire test results Part 1: Application of test results to predict fire performance of internal linings and other building products
|
ISO 1210:1992
|
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
|
ISO 9239-2:2002
|
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
|
ISO/TR 5658-1:1997
|
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
|
ISO 13784-1:2014
|
Reaction to fire test for sandwich panel building systems — Part 1: Small room test
|
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
|
IEC 61034-2:2005+AMD1:2013 CSV
|
Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
|
ISO/TR 9122-6:1994
|
Toxicity testing of fire effluents Part 6: Guidance for regulators and specifiers on the assessment of toxic hazards in fires in buildings and transport
|
ISO 6925:1982
|
Textile floor coverings — Burning behaviour — Tablet test at ambient temperature
|
ISO/TR 11925-1:1999
|
Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
|
IEC 61034-1:2005+AMD1:2013 CSV
|
Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
|
ISO 6941:2003
|
Textile fabrics Burning behaviour Measurement of flame spread properties of vertically oriented specimens
|
ISO 10351:1992
|
Plastics Determination of the combustibility of specimens using a 125 mm flame source
|