BS PAS 8820(2016) : 2016
Current
The latest, up-to-date edition.
CONSTRUCTION MATERIALS - ALKALI-ACTIVATED CEMENTITIOUS MATERIAL AND CONCRETE - SPECIFICATION
Hardcopy , PDF
English
12-07-2016
Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Alkali-activated cementitious material
5 AACM concrete
6 Intended use specific testing and trials for
AACM concrete
7 Information and marking
Annexes
Annex A (informative) - Guidance for project teams
Annex B (informative) - Reference concrete
Annex C (informative) - Considerations when producing or
specifying an innovative AACM or AACM concrete
Annex D (informative) - Avoidance of alkali-silica reaction
Annex E (normative) - Test method for determination of frost
scaling resistance of AACM concrete (based on HETEK
adaptation of the Boras method SS 137245 - Henrichsen
et al. 1997 [NR5])
Bibliography
Describes the performance requirements for alkali-activated cementitious material comprising aluminosilicate main constituents and an alkali activator.
Committee |
ZZ/2
|
DocumentType |
Standard
|
Pages |
58
|
PublisherName |
British Standards Institution
|
Status |
Current
|
BS PAS 2050(2011) : 2011 | SPECIFICATION FOR THE ASSESSMENT OF THE LIFE CYCLE GREENHOUSE GAS EMISSIONS OF GOODS AND SERVICES |
BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
BS EN 480-1:2014 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and reference mortar for testing |
BS ISO 10005:2005 | Quality management systems. Guidelines for quality plans |
BS EN 14227-4:2013 | Hydraulically bound mixtures. Specifications Fly ash for hydraulically bound mixtures |
PD CEN/TR 15697:2008 | Cement. Performance testing for sulfate resistance. State of the art report |
BS EN 480-11:2005 | Admixtures for concrete, mortar and grout. Test methods Determination of air void characteristics in hardened concrete |
BS EN 15804 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS |
DD CEN/TS 12390-10:2007 | Testing hardened concrete Determination of the relative carbonation resistance of concrete |
BS EN 13369:2013 | Common rules for precast concrete products |
BS EN 480-14:2006 | Admixtures for concrete, mortar and grout. Test methods Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test |
BS EN 196-2:2013 | Method of testing cement Chemical analysis of cement |
ASTM C 1157/C1157M : 2017 : REDLINE | Standard Performance Specification for Hydraulic Cement |
BS EN 1015-4:1999 | Methods of test for mortar for masonry Determination of consistence of fresh mortar (by plunger penetration) |
BS EN ISO 9001:2015 | Quality management systems. Requirements |
BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
BS EN ISO 14025:2010 | Environmental labels and declarations. Type III environmental declarations. Principles and procedures |
BS EN 12390-7:2009 | Testing hardened concrete Density of hardened concrete |
BS EN 1015-3:1999 | Methods of test for mortar for masonry Determination of consistence of fresh mortar (by flow table) |
ASTM C 1012 : 2004 | Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution |
BS EN 1008:2002 | Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
BS EN 12390-3:2009 | Testing hardened concrete Compressive strength of test specimens |
BS ISO 1920-9:2009 | Testing of concrete Determination of creep of concrete cylinders in compression |
BS EN 12390-6:2000 | Testing hardened concrete Tensile splitting strength of test specimens |
BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
BS EN 196-3 : 2005 | METHODS OF TESTING CEMENT - PART 3: DETERMINATION OF SETTING TIMES AND SOUNDNESS |
BS EN 12390-8:2009 | Testing hardened concrete Depth of penetration of water under pressure |
BS EN 12620:2013 | Aggregates for concrete |
BS ISO 15686-5:2017 | Buildings and constructed assets. Service life planning Life-cycle costing |
BS EN 12390-13:2013 | Testing hardened concrete Determination of secant modulus of elasticity in compression |
BS EN 60812:2006 | Analysis techniques for system reliability. Procedure for failure mode and effects analysis (FMEA) |
BS EN 15183:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test |
BS EN 480-2:2006 | Admixtures for concrete, mortar and grout. Test methods Determination of setting time |
PD CEN/TR 16142:2011 | Concrete. A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
BS EN 14216:2015 | Cement. Composition, specifications and conformity criteria for very low heat special cements |
BS EN 196-8:2010 | Methods of testing cement Heat of hydration. Solution method |
ASTM C 666/C666M : 2015 : REDLINE | Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing |
BS EN 13501-1 : 2007 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
BS EN 196-9:2010 | Methods of testing cement Heat of hydration. Semi-adiabatic method |
BS EN 413-2:2016 | Masonry cement Test methods |
DD CEN/TS 12390-9:2006 | Testing hardened concrete Freeze-thaw resistance. Scaling |
PD 156865:2008 | Standardized method of life cycle costing for construction procurement. A supplement to BS ISO 15686-5. Buildings and constructed assets. Service life planning. Life cycle costing |
BS EN 1363-1:2012 | Fire resistance tests General requirements |
BS EN 934-2 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 2: CONCRETE ADMIXTURES - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
BS 8500-2(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
DD CEN/TS 12390-11:2010 | Testing hardened concrete Determination of the chloride resistance of concrete, unidirectional diffusion |
BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
BS EN 12390-5:2009 | Testing hardened concrete Flexural strength of test specimens |
BS EN 196-1:2016 | Methods of testing cement Determination of strength |
PD CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
BS EN 12390-2:2009 | Testing hardened concrete Making and curing specimens for strength tests |
BS EN 480-10:2009 | Admixtures for concrete, mortar and grout. Test methods Determination of water soluble chloride content |
BS EN 934-1:2008 | Admixtures for concrete, mortar and grout Common requirements |
BS EN 197-2:2014 | Cement Conformity evaluation |
BS EN ISO 9000 SERIES : 2002 | QUALITY MANAGEMENT SYSTEMS |
BS EN 932-3:1997 | Tests for general properties of aggregates Procedure and terminology for simplified petrographic description |
BS ISO 10007:2017 | Quality management. Guidelines for configuration management |
SAC GB/T 29423 : 2012 | ALKALI-ACTIVATED SLAG-FLY ASH CONCRETE FOR ANTICORROSIVE CEMENT PRODUCTS |
BS ISO 1920-8:2009 | Testing of concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.