PD CEN/TS 15398:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
30-03-2020
English
29-02-2016
European foreword
Introduction
1 Scope
2 Normative references
3 Descriptions and definitions of symbols
Bibliography
Defines a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols: - resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats; - textile floor coverings, excluding loose-laid mats; - laminate floor coverings; - floor panels for floating installation.
This Technical Specification establishes a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols:
-
resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats;
-
textile floor coverings, excluding loose-laid mats;
-
laminate floor coverings;
-
floor panels for floating installation.
| Committee |
PRI/60
|
| DevelopmentNote |
Supersedes DD CEN/TS 15398. (02/2016)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| CEN/TS 15398:2016 | Identical |
| EN 717-2:1994/AC:2002 | WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
| EN ISO 10874:2012 | Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) |
| ISO 24346:2006 | Resilient floor coverings Determination of overall thickness |
| ISO 24344:2008 | Resilient floor coverings — Determination of flexibility and deflection |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 14215:2013 | Textile floor coverings - Classification of machine-made pile rugs and runners |
| EN 1815:1997 | Resilient and textile floor coverings - Assessment of static electrical propensity |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| EN 985:2001 | Textile floor coverings - Castor chair test |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| EN 994:2012 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
| ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
| EN 425:2002 | Resilient and laminate floor coverings - Castor chair test |
| EN ISO 24346 : 2012 | RESILIENT FLOOR COVERINGS - DETERMINATION OF OVERALL THICKNESS (ISO 24346:2006) |
| ISO 24340:2006 | Resilient floor coverings Determination of thickness of layers |
| EN 15468:2016 | Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods |
| ISO 8543:1998 | Textile floor coverings Methods for determination of mass |
| ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN ISO 26987 : 2012 | RESILIENT FLOOR COVERINGS - DETERMINATION OF STAINING AND RESISTANCE TO CHEMICALS (ISO 26987:2008) |
| EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| ISO 26987:2008 | Resilient floor coverings — Determination of staining and resistance to chemicals |
| ISO 2076:2013 | Textiles Man-made fibres Generic names |
| EN 13553:2017 | Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification |
| EN 13745 : 2004 | SURFACES FOR SPORTS AREAS - DETERMINATION OF SPECULAR REFLECTANCE |
| EN 424:2001 | Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| EN 669:1997 | Resilient floor coverings - Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| ISO 24338:2014 | Laminate floor coverings Determination of abrasion resistance |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| EN ISO 24341 : 2012 | RESILIENT AND TEXTILE FLOOR COVERINGS - DETERMINATION OF LENGTH, WIDTH AND STRAIGHTNESS OF SHEET (ISO 24341:2006) |
| EN 1399:1997/AC:1998 | RESILIENT FLOOR COVERINGS - DETERMINATION OF RESISTANCE TO STUBBED AND BURNING CIGARETTES |
| EN 986:2005 | Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
| ISO 24334:2014 | Laminate floor coverings Determination of locking strength for mechanically assembled panels |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 13893:2002 | Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
| EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
| ISO 23997:2007 | Resilient floor coverings — Determination of mass per unit area |
| CEN/TS 16354:2013 | Laminate floor coverings - Underlays - Specification, requirements and test methods |
| EN ISO 24340 : 2012 | RESILIENT FLOOR COVERINGS - DETERMINATION OF THICKNESS OF LAYERS (ISO 24340:2006) |
| EN 660-2:1999/A1:2003 | RESILIENT FLOOR COVERINGS - DETERMINATION OF WEAR RESISTANCE - PART 2: FRICK-TABER TEST |
| EN 438-1:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information |
| ISO 24341:2006 | Resilient and textile floor coverings Determination of length, width and straightness of sheet |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| EN ISO 2076:2013 | Textiles - Man-made fibres - Generic names (ISO 2076:2013) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| EN ISO 24344 : 2012 | RESILIENT FLOOR COVERINGS - DETERMINATION OF FLEXIBILITY AND DEFLECTION (ISO 24344:2008) |
| EN 14978:2016 | Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| EN 1814:2005 | Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN ISO 24342:2012/A1:2012 | RESILIENT AND TEXTILE FLOOR-COVERINGS - DETERMINATION OF SIDE LENGTH, EDGE, STRAIGHTNESS AND SQUARENESS OF TILES (ISO 24342:2007/AMD 1:2012) |
| ISO 24342:2007 | Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles |
| ISO 10874:2009 | Resilient, textile and laminate floor coverings Classification |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| ISO 1765:1986 | Machine-made textile floor coverings — Determination of thickness |
| EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.