Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PD 8010-1:2004

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Code of practice for pipelines Steel pipelines on land
Superseded date

31-03-2015

Published date

30-07-2004

Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Health, safety and assurance
5 Design - System and safety
6 Design - Mechanical integrity
7 Design - Stations and terminals
8 Design - Materials and coatings
9 Design - Corrosion management
10 Construction - Fabrication and installation
11 Construction - Testing
12 Pre-commissioning and commissioning
13 Operation, maintenance and integrity assurance management
14 Abandonment
Annex A (informative) Extent of pipeline systems for conveying oil
         and gas that are covered by this part of PD 8010
Annex B (informative) Quality assurance
Annex C (normative) Records and document control
Annex D (informative) Hazards in pipeline design
Annex E (normative) Safety evaluation of pipelines
Annex F (normative) Pipeline route selection
Annex G (normative) Loads
Annex H (informative) Buckling
Annex I (informative) Planning and legal
Bibliography

Provides recommendations for and guidance on the design, selection, specification and use of materials, routing, land acquisition, construction, installation, testing, operation, maintenance and abandonment of land pipeline systems constructed from steel.

Committee
PSE/17/2
DevelopmentNote
Supersedes 02/710817 DC. (08/2004) Included in BS KIT 142 (09/2004) Reviewed and confirmed by BSI, January 2010. (12/2009)
DocumentType
Standard
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

07/30138021 DC : 0 PD 8010-3 - CODE OF PRACTICE FOR PIPELINES - PART 3: GUIDE TO THE APPLICATION OF PIPELINE RISK ASSESSMENT TO PROPOSED DEVELOPMENTS IN THE VICINITY OF MAJOR HAZARD PIPELINES
UNI CEN ISO/TS 12747 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - RECOMMENDED PRACTICE FOR PIPELINE LIFE EXTENSION
BS CP2010-2(1970) : 1970 PIPELINES - PART 2: DESIGN AND CONSTRUCTION OF STEEL PIPELINES IN LAND
S.R. CEN ISO/TS 12747:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - RECOMMENDED PRACTICE FOR PIPELINE LIFE EXTENSION (ISO/TS 12747:2011)
12/30258581 DC : 0 BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
PD 8010-4:2012 Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management
BS 4515-1:2004 Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines
BS 4515-1:2009 Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines
14/30286899 DC : 0 PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
11/30201808 DC : 0 BS PD 8010-4 - CODE OF PRACTICE FOR PIPELINES - PART 4: RISK-BASED INTEGRITY MANAGEMENT OF STEEL PIPELINES ON LAND AND SUB SEA PIPELINES
BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
CAN/CSA-Z662-15 Oil and gas pipeline systems
PD CEN ISO/TS 12747:2013 Petroleum and natural gas industries. Pipeline transportation systems. Recommended practice for pipeline life extension
PD 8010-2:2004 Code of practice for pipelines Subsea pipelines
BS PD8010-3(2009) : 2009 PIPELINE SYSTEMS - PART 3: STEEL PIPELINES ON LAND - GUIDE TO THE APPLICATION OF PIPELINE RISK ASSESSMENT TO PROPOSED DEVELOPMENTS IN THE VICINITY OF MAJOR ACCIDENT HAZARD PIPELINES CONTAINING FLAMMABLES - SUPPLEMENT TO PD 8010-1:2004
ISO/TS 12747:2011 Petroleum and natural gas industries Pipeline transportation systems Recommended practice for pipeline life extension
CEN ISO/TS 12747:2013 Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension (ISO/TS 12747:2011)

BS 5555:1993 Specification for SI units and recommendations for the use of their multiples and of certain other units
BS 7867:1997 Specification for portable fire extinguishers for use in aircraft
96/101548 DC : DRAFT MAR 1996 BS EN 12336 TUNNELLING MACHINES - SHIELD MACHINES, HORIZONTAL THRUST-BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
BS 5607:1998 Code of practice for the safe use of explosives in the construction industry
BS ISO 3183-3:1999 Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C
BS 7910:1999 Guide on methods for assessing the acceptability of flaws in metallic structures
ISO 15590-1:2009 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends
BS EN 1295-1 : 1998 STRUCTURAL DESIGN OF BURIED PIPELINES UNDER VARIOUS CONDITIONS OF LOADING - PART 1: GENERAL REQUIREMENTS
NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ISO 14313:2007 Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
BS 6100-2.2.3:1990 Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. Tunnels Tunnels
BS EN 815 : 1997 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
ASME B31.3:2016 PROCESS PIPING
BS 3618-3:1971 Glossary of mining terms Boring and exploration
BS 4515-1:2000 Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines
BS 6031:1981 Code of practice for earthworks
BS 5949:1980 Specification for asbestos-cement pipes and joints for thrust-boring and pipe jacking
ISO 3183-2:1996 Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B
BS EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
BS EN ISO 14001:2015 Environmental management systems. Requirements with guidance for use
BS EN 60079-10:2003 Electrical apparatus for explosive gas atmospheres Classification of hazardous areas
BS EN 60079-14:2014 Explosive atmospheres Electrical installations design, selection and erection
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
BS EN 1594:2013 Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS 7572:1992 Code of practice for thermally insulated underground piping systems
BS EN 12110:2014 Tunnelling machines. Air locks. Safety requirements
PD 8010-2:2004 Code of practice for pipelines Subsea pipelines
BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
BS ISO 15649:2001 Petroleum and natural gas industries. Piping
BS EN 295-7:2013 Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking
ISO 10474:2013 Steel and steel products — Inspection documents
MSS SP 44 : 2016 STEEL PIPELINE FLANGES
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASME B16.21 : 2016 NONMETALLIC FLAT GASKETS FOR PIPE FLANGES
ISO 3183-1:1996 Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
BS 3618-8:1974 Glossary of mining terms Winning and working
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
BS EN 14161 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
API 579-1 : 2016 FITNESS-FOR-SERVICE
BS 3293:1960 Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
BS 4515-2:1999 Specification for welding of steel pipelines on land and offshore Duplex stainless steel pipelines
BS 5911-120:1989 Precast concrete pipes, fittings and ancillary products Specification for reinforced jacking pipes with flexible joints
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
BS 7361-1:1991 Cathodic protection Code of practice for land and marine applications
ISO 13623:2017 Petroleum and natural gas industries — Pipeline transportation systems
BS EN 10204:2004 Metallic products. Types of inspection documents
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more