HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE

Available format(s)

Hardcopy , PDF

Language(s)

English - Italian

Published date

01-01-2014

Publisher

Comitato Elettrotecnico Italiano

FOREWORD
INTRODUCTION
1. Scope
2. Normative references
3. Definitions
4. General requirement
5. General conditions for the tests
6. Classification
7. Marking and instructions
8. Protection against access to live parts
9. Starting of motor-operated appliances
10. Power input and current
11. Heating
12. Void
13. Leakage current and dielectric strength at
    operating temperature
14. Transient overvoltages
15. Moisture resistance
16. Leakage current and electric strength
17. Overload protection of transformers and
    associated circuits
18. Endurance
19. Abnormal operation
20. Stability and mechanical hazards
21. Mechanical strength
22. Construction
23. Internal wiring
24. Components
25. Supply connection and external flexible cords
26. Terminals for external conductors
27. Provision for earthing
28. Screws and connections
29. Clearances, creepage distances and solid
    insulation
30. Resistance to heat and fire
31. Resistance to rusting
32. Radiation, toxicity and similar hazards
Annexs
Annex B (normative) - Appliances powered by
        rechargeable batteries
Annex AA (normative) - Precast paving slabs
Annex BB (normative) - Requirements for internal
         combustion engine powered machines using
         liquefied petroleum gas (LPG)
Annex CC (normative) - Falling-object protective
         structures (FOPS) Dynamic test and
         performance requirements
Annex DD (informative) - Emission of acoustical noise
Annex EE (informative) - Emission of vibration
Annex ZA (normative) - Special national condition
Annex ZC (normative) - Normative references to
         international publications with their corresponding
         European publications
Annex ZE (informative) - Specific additional requirements
         for appliances and machines intended for
         commercial use
Annex ZZ (informative) - Coverage of Essential
         Requirements of EU Directive 2006/42/EC
Bibliography

Describes the safety of powered ride-on and powered walk-behind machines intended for commercial indoor or outdoor uses.

Committee	CT 59/61
DevelopmentNote	Classificazione CEI 61-219. (08/2001) To be read in conjunction with CEI EN 60335-1. (05/2014)
DocumentType	Standard
Pages	126
PublisherName	Comitato Elettrotecnico Italiano
Status	Current

Standards	Relationship
EN 60335-2-72:2012	Identical

ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 7574-4:1985	Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines
ISO 3411:2007	Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
EN 60335-2-68:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE (IEC 60335-2-68:2012, MODIFIED)
ISO 5353:1995	Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
IEC 60335-2-67:2012+AMD1:2016 CSV	Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse
EN 27574-1 : 1988	ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - GENERAL CONSIDERATIONS AND DEFINITIONS
ISO 9614-2:1996	Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
ISO 7574-1:1985	Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions
IEC 60335-2-10:2002+AMD1:2008 CSV	Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
IEC 60335-2-69:2016	Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
EN 60335-2-67:2012	Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use
EN ISO 11201:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 60335-2-69:2012	Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
EN ISO 5349-1 : 2001	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
EN ISO 3744:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 9614-2 : 1996	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING
EN ISO 3743-1:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
EN 27574-4 : 1988	ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 4: METHODS FOR STATED VALUES FOR BATCHES OF MACHINES
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
ISO 5349-1:2001	Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
IEC 60312-1:2010+AMD1:2011 CSV	Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV	Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 60335-2-68:2012+AMD1:2016 CSV	Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN 60335-2-10:2003/A1:2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
ISO 6344-2:1998	Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220
ISO 3743-1:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room

View more information

$462.70

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

CEI EN 60335-2-72 : 2014

Current

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription