Name: CEN/TR 15226:2006
Brand: CEN

Building products - Treatment of acoustics in product technical specifications

Published date

29-03-2006

Publisher

Comite Europeen de Normalisation

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for the contents of a product standard
5 Extension rules for the declaration of acoustic properties
Annex A (informative) Items to be covered in a product standard
Annex B (informative) Choosing appropriate properties
Annex C (normative) Relevant measured acoustic properties
for some common products
Annex D (informative) Examples of rules for direct and
extended application of test results
Bibliography

This document specifies the technical requirements relating to acoustics for a product standard, European Technical Approval Guidelines (ETAG) or European Technical Approval (ETA) for a specific building product or equipment, or a family of building products or equipment. In particular, it gives advice on how to write requirements in response to the mandated characteristics on acoustics under the Construction Products Directive.NOTE 1In the remainder of this document, the terms used relate to CEN and product standards. The concepts are, however, equally applicable to the European Organisation for Technical Approvals (EOTA).The purpose of this document is to assist the product Technical Committees in preparing acoustic clauses to ensure that such product standards:- are as homogeneous as possible, with each individual product standard having the same basic structure;- are in full accordance with the standards for the measurement of acoustic properties;- reflect the latest technical knowledge of methods of determining the acoustical properties from the specific family of building products or equipment under consideration.NOTE 2Clause 2 lists the European and International Standards to be used in the drafting of acoustic provisions standard. Annex A contains an outline of a typical acoustic product standard summarizing the information that is required. Annex B contains guidance on choosing appropriate properties. Annex C describes the relevant measured acoustic properties for common products.

Committee	CEN/TC 126
DocumentType	Technical Report
PublisherName	Comite Europeen de Normalisation
Status	Current

Standards	Relationship
NEN NPR CEN/TR 15226 : 2006	Identical
PD CEN/TR 15226:2006	Identical
I.S. CEN/TR 15226:2006	Identical
DIN-Fachbericht CEN/TR 15226:2006-07	Identical
DIN-Fachbericht CEN/TR 15226:2006-07	Corresponds

EN 20140-9 : 1993	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 9: LABORATORY MEASUREMENTS OF ROOM-TO-ROOM AIRBORNE SOUND INSULATION OF A SUSPENDED CEILING WITH A PLENUM SUSPENDED ABOVE IT
ISO 3822-1:1999	Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement
ISO 140-5:1998	Acoustics Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and faades
ISO 140-10:1991	Acoustics Measurement of sound insulation in buildings and of building elements Part 10: Laboratory measurement of airborne sound insulation of small building elements
ISO 15186-3:2002	Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory measurements at low frequencies
EN ISO 11957:2009	Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
ISO 15186-2:2003	Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements
ISO 354:2003	Acoustics — Measurement of sound absorption in a reverberation room
ISO 11546-2:1995	Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
EN 12354-6:2003	Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces
ISO 717-2:2013	Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation
EN 29052-1:1992	Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
ISO 140-6:1998	Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors
EN ISO 16032:2004	Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)
ISO 3822-4:1997	Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 4: Mounting and operating conditions for special appliances
ISO 140-7:1998	Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors
ISO 11957:1996	Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements
EN ISO 717-2:2013	Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013)
ISO 140-3:1995	Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements
ISO 9053:1991	Acoustics Materials for acoustical applications Determination of airflow resistance
ISO 16032:2004	Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method
EN ISO 140-12 : 2000	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR
EN ISO 140-14:2004/AC:2009	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 14: GUIDELINES FOR SPECIAL SITUATIONS IN THE FIELD
ISO/PAS 16940:2004	Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass
EN ISO 140-5:1998	Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of façade elements and façades (ISO 140-5:1998)
ISO/TR 140-13:1997	Acoustics — Measurement of sound insulation in buildings and of building elements — Part 13: Guidelines
ISO 140-11:2005	Acoustics Measurement of sound insulation in buildings and of building elements Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors
EN 29053:1993	Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991)
ISO 11654:1997	Acoustics — Sound absorbers for use in buildings — Rating of sound absorption
ISO 10052:2004	Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method
EN 12354-1:2000	Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms
EN ISO 3822-4:1997	Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
EN ISO 11546-2:2009	Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
ISO 140-1:1997	Acoustics Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission
EN ISO 140-6 : 1998	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS
EN ISO 354:2003	Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
ISO 3822-2:1995	Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 2: Mounting and operating conditions for draw-off taps and mixing valves
EN ISO 140-3:1995/A1:2004	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS
ISO 140-12:2000	Acoustics Measurement of sound insulation in buildings and of building elements Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor
ISO 140-4:1998	Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms
ISO 140-8:1997	Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
ISO 140-14:2004	Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field
EN 20140-2:1993	Acoustics - Measurement of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data (ISO 140-2:1991)
EN ISO 140-11:2005	Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005)
EN 12354-3:2000	Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound
EN ISO 140-8 : 1997	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR
EN ISO 140-1:1997/A1:2004	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: REQUIREMENTS FOR LABORATORY TEST FACILITIES WITH SUPPRESSED FLANKING TRANSMISSION
EN 14366:2004	Laboratory measurement of noise from waste water installations
ISO 3822-3:1997	Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances
ISO 140-9:1985	Acoustics Measurements of sound insulation in buildings and of building elements Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
ISO 717-1:2013	Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
EN ISO 15186-1 : 2003	Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000)
EN ISO 3822-1:1999/A1:2008	ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 1: METHOD OF MEASUREMENT
ISO 11546-1:1995	Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
EN ISO 3822-2:1995	Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
EN ISO 3382 : 2000	ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS
EN 20140-10 : 1992	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 10: LABORATORY MEASUREMENT OF AIRBORNE SOUND INSULATION OF SMALL BUILDING ELEMENTS
EN 12354-4:2000	Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside
EN ISO 11821 : 1997	ACOUSTICS - MEASUREMENT OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
EN ISO 11546-1:2009	Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
ISO 9052-1:1989	Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings
ISO 15186-1:2000	Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements
ISO 3382:1997	Acoustics — Measurement of the reverberation time of rooms with reference to other acoustical parameters
EN ISO 140-7:1998	Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998)
EN ISO 11654:1997	Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997)
EN ISO 10052:2004/A1:2010	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
ISO 11821:1997	Acoustics — Measurement of the in situ sound attenuation of a removable screen
EN 12354-2:2000	Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms
EN ISO 140-4:1998	Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998)