Name: CEN/TS 15223:2017
Brand: CEN

Plastics piping systems - Validated design parameters of buried thermoplastics piping systems

Published date

01-11-2017

Publisher

Comite Europeen de Normalisation

This Technical Specification covers validated design parameters of buried thermoplastics piping systems for functional and structural design for the following applications:pressure (excluding piping systems for gaseous fluids and industrial applications);non-pressure.The functional design is based on relevant standards and commonly used practices. Depending on the project parameters, this route for structural design can be either established by long term experience (within certain limitations),or calculated according to CEN/TR 1295-2 by using thermoplastic pipe material related properties and design criteria.NOTEThe route is shown in the flowchart given in Figure 1 in 4.1. Since in practice precise details of types of soil and installation conditions are not always available at the design stage, the choice of design assumptions is left to the judgement of the designer/specifier. In this connection, this guide can only provide general indications and advice.

Committee	CEN/TC 155
DocumentType	Technical Specification
PublisherName	Comite Europeen de Normalisation
Status	Current

Standards	Relationship
DIN CEN/TS 15223;DIN SPEC 16823:2018-01	Identical
ONORM ONR CEN/TS 15223 : 2018	Identical
S.R. CEN/TS 15223:2017	Identical
S.R. CEN/TS 15223:2008	Identical
PKN CEN/TS 15223 : 2011	Identical
UNI CEN/TS 15223 : 2008	Identical
NEN NVN CEN/TS 15223 : 2017	Identical
UNE-CEN/TS 15223:2017	Identical
NEN NPR CEN/TS 15223 : 2008	Identical
PD CEN/TS 15223:2017	Identical

PREN 1401-1 : DRAFT 2018	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
18/30371677 DC : DRAFT MAY 2018	BS EN 1401-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
EN 1852-1:2018	Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
CEN/TR 1046:2013	Thermoplastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for underground installation
BS EN 1852-1:2018	Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system
BS EN 1401-1:2009	Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
UNI EN 1401-1 : 2009	PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN 16961-2:2010-03	THERMOPLASTICS PIPES AND FITTINGS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - PART 2: TECHNICAL DELIVERY SPECIFICATIONS
I.S. EN 1852-1:2018	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
EN 1401-1:2009	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
S.R. CEN/TR 1046:2013	THERMOPLASTICS PIPING AND DUCTING SYSTEMS - SYSTEMS OUTSIDE BUILDING STRUCTURES FOR THE CONVEYANCE OF WATER OR SEWAGE - PRACTICES FOR UNDERGROUND INSTALLATION
DIN EN 1401-1:2009-07	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 1401-1:2009	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM

EN ISO 12162:2009	Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
EN 1295-1:1997	Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
EN 805:2000	Water supply - Requirements for systems and components outside buildings
ISO 13968:2008	Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
ISO 9080:2012	Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 3:1973	Preferred numbers Series of preferred numbers
CEN/TR 1046:2013	Thermoplastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for underground installation
EN ISO 9080:2012	Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
ISO 12162:2009	Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient
EN 476:2011	General requirements for components used in drains and sewers
ISO 1452-2:2009	Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 2: Pipes
EN 14758-1:2012	Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
EN ISO 13968:2008	Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
EN 12666-1:2005+A1:2011	Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
EN ISO 9969:2016	Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
CEN/TR 1295-2:2005	Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
CEN/TR 1295-3:2007	Structural design of buried pipelines under various conditions of loading - Part 3: Common method
EN 1401-1:2009	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
ISO 497:1973	Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
ISO 13761:2017	Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
EN 1610:2015	Construction and testing of drains and sewers
EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
ISO 9969:2016	Thermoplastics pipes Determination of ring stiffness
EN ISO 1452-2:2009	Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)