CFR 21(PTS800-1299) : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy
21-11-2019
English
Part 800 - General
Part 801 - Labeling
Part 803 - Medical device reporting
Part 806 - Medical devices; reports of corrections and removals
Part 807 - Establishment registration and device listing for
manufacturers and initial importers of devices
Part 808 - Exemptions from Federal preemption of State and local
medical device requirements
Part 809 - In vitro diagnostic products for human use
Part 810 - Medical device recall authority
Part 812 - Investigational device exemptions
Part 813 - [Reserved]
Part 814 - Premarket approval of medical devices
Part 820 - Quality system regulation
Part 821 - Medical device tracking requirements
Part 822 - Postmarket surveillance
Part 860 - Medical device classification procedures
Part 861 - Procedures for performance standards development
Part 862 - Clinical chemistry and clinical toxicology devices
Part 864 - Hematology and pathology devices
Part 866 - Immunology and microbiology devices
Part 868 - Anesthesiology devices
Part 870 - Cardiovascular devices
Part 872 - Dental devices
Part 874 - Ear, nose, and throat devices
Part 876 - Gastroenterology-urology devices
Part 878 - General and plastic surgery devices
Part 880 - General hospital and personal use devices
Part 882 - Neurological devices
Part 884 - Obstetrical and gynecological devices
Part 886 - Ophthalmic devices
Part 888 - Orthopedic devices
Part 890 - Physical medicine devices
Part 892 - Radiology devices
Part 895 - Banned devices
Part 898 - Performance standard for electrode lead wires and
patient cables
Part 900 - Mammography
Part 1000 - General
Part 1002 - Records and reports
Part 1003 - Notification of defects or failure to comply
Part 1004 - Repurchase, repairs, or replacement of electronic
products
Part 1005 - Importation of electronic products
Part 1010 - Performance standards for electronic products: General
Part 1020 - Performance standards for ionizing radiation emitting
products
Part 1030 - Performance standards for microwave and radio frequency
emitting products
Part 1040 - Performance standards for light-emitting products
Part 1050 - Performance standards for sonic, infrasonic, and ultrasonic
radiation-emitting products
Part 1210 - Regulations under the Federal Import Milk Act
Part 1230 - Regulations under the Federal Caustic Poison Act
Part 1240 - Control of communicable diseases
Part 1250 - Interstate conveyance sanitation
Part 1251-1269 - [Reserved]
Part 1270 - Human tissue intended for transplantation
Part 1271 - Human cells, tissues, and cellular and tissue-based
products
Part 1272-1299 - [Reserved]
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Code of Federal Regulations
|
Status |
Superseded
|
SupersededBy |
ANSI Z80.27 : 2014 | OPHTHALMICS - IMPLANTABLE GLAUCOMA DEVICES |
DIN EN ISO 12417-1 E : 2016 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015) |
AAMI ST91 : 2015 | FLEXIBLE AND SEMI-RIGID ENDOSCOPE PROCESSING IN HEALTH CARE FACILITIES |
AAMI SW87 : 2012 | APPLICATION OF QUALITY MANAGEMENT SYSTEM CONCEPTS TO MEDICAL DEVICE DATA SYSTEMS |
ANSI INCITS 338 : 2003 | HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S OPTICAL SPECIFICATION (HIPPI-6400-OPT) |
AAMI ST65 : 2008 : R2013 | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
ISO/TR 27809:2007 | Health informatics Measures for ensuring patient safety of health software |
ASTM F 2407 : 2006 : R2013 : EDT 1 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
PREN ISO 80601-2-61 : DRAFT 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
DIN EN ISO 12417-1:2016-02 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015) |
UNI EN ISO 80601-2-61 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
13/30275206 DC : 0 | BS ISO 5841-2 - IMPLANTS FOR SURGERY - CARDIAC PACEMAKERS - PART 2: REPORTING OF CLINICAL PERFORMANCE OF POPULATIONS OF PULSE GENERATORS OR LEADS |
ASTM F 2394 : 2007 : R2017 | Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System |
BS EN 62148-17:2014 | Fibre optic active components and devices. Package and interface standards Transmitter and receiver components with dual coaxial RF connectors |
AAMI TIR59:2017 | INTEGRATING HUMAN FACTORS INTO DESIGN CONTROLS |
BS EN 61223-3-2:2008 | Evaluation and routine testing in medical imaging departments Acceptance tests. Imaging performance of mammographic X-ray equipment |
ASTM F 2665 : 2009 | Standard Specification for Total Ankle Replacement Prosthesis |
CSA Z9919 : 2007 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
AAMI HE75 : 2009(R2013) | HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES |
ASTM F 2038 : 2000 : EDT 1 | Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
CAN/CSA-Z900.2.1-17 | Tissues for assisted reproduction |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
CAN/CSA-ISO/TS 16775:17 | Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and ISO 11607-2 (Adopted ISO technical specification 16775:2014, first edition, 2014-05-15) |
S.R. CEN ISO/TS 16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 (ISO/TS 16775:2014) |
ISO/TS 12417:2011 | Cardiovascular implants and extracorporeal systems Vascular device-drug combination products |
AAMI ST65:2008(R2018) | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
AAMI ST24 : 1999 : R2013 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
AAMI AT6 : 2013 | AUTOLOGOUS TRANSFUSION DEVICES |
BS EN ISO 80601-2-61:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment |
ISO 18362:2016 | Manufacture of cell-based health care products Control of microbial risks during processing |
ASTM F 1185 : 2003 | Standard Specification for Composition of Hydroxylapatite for Surgical Implants |
AAMI TIR38 : 2015 | MEDICAL DEVICE SAFETY ASSURANCE CASE REPORT GUIDANCE |
ASTM G 175 : 2013 : REDLINE | Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications |
ASTM E 2641 : 2009 : R2017 | Standard Practice for Best Practices for Safe Application of 3D Imaging Technology |
AAMI ST41 : 2008 | ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
CSA C22.2 No. 60601.2.43 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-43: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR INTERVENTIONAL PROCEDURES |
ASTM F 2038 : 2000 | Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
ASTM F 1538 : 2003 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
ASTM F 1185 : 2003 : R2014 | Standard Specification for Composition of Hydroxylapatite for Surgical Implants |
ASTM F 754 : 2008 | Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders |
ASTM E 1000 : 2016 : REDLINE | Standard Guide for Radioscopy |
ASTM E 1741 : 2000 | Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry (Withdrawn 2009) |
ASTM D 5258 : 2002 : R2007 | Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating |
ASTM F 1538 : 2003 : R2009 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
ASTM D 5258 : 2002 : R2013 | Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating |
ASTM F 3089 : 2014 | Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
ASTM E 94 : 2004 : R2010 | Standard Guide for Radiographic Examination |
ASTM F 2900 : 2011 | Standard Guide for Characterization of Hydrogels used in Regenerative Medicine (Withdrawn 2020) |
ASTM F 1925 : 2017 : REDLINE | Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants |
ASTM E 1647 : 2016 : REDLINE | Standard Practice for Determining Contrast Sensitivity in Radiology |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS EN ISO 14630:2012 | Non-active surgical implants. General requirements |
IEC 60601-2-44:2009+AMD1:2012+AMD2:2016 CSV | Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
I.S. EN 61223-2-6:2007 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
EN 62148-17:2014 | Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors |
CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) |
AAMI TIR26 : 2000 | VENTRICULAR ASSIST AND HEART REPLACEMENT SYSTEMS |
NSF 341 : 2012 | HEALTH/FITNESS FACILITIES |
ISEA Z308.1 : 2015 | MINIMUM REQUIREMENTS FOR WORKPLACE FIRST AID KITS AND SUPPLIES |
12/30251292 DC | BS ISO/ASTM 51261. Practice for calibration of routine dosimetry systems for radiation processing |
SAE ARP 5560 : 2014 | SAFETY CONSIDERATIONS FOR HIGH-INTENSITY LIGHTS (HIL) DIRECTED INTO THE NAVIGABLE AIRSPACE |
ANSI/AAMI/IEC 60601-1-2:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
14/30251609 DC : 0 | BS EN ISO 12417-1 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS |
PD CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices. Guidance on the application of ISO 11607-1 and ISO 11607-2 |
11/30246243 DC : 0 | BS EN 62148-17 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
DIN ISO 13022 E : 2014 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES (ISO 13022:2012) |
AAMI TIR52 : 2014(R2017) | ENVIRONMENTAL MONITORING FOR TERMINALLY STERILIZED HEALTHCARE PRODUCTS |
BS EN 60601-2-44 : 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY (IEC 60601-2-44:2009) |
ANSI Z80.11:2012 | OPHTHALMICS - LASER SYSTEMS FOR CORNEAL RESHAPING |
ASTM F 3225 : 2017 | Standard Guide for Characterization and Assessment of Vascular Graft Tissue Engineered Medical Products (TEMPs) |
ASTM F 1185 : 2003 : R2009 | Standard Specification for Composition of Hydroxylapatite for Surgical Implants |
ASTM F 1581 : 2008 : R2012 | Standard Specification for Composition of Anorganic Bone for Surgical Implants |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
ASTM F 882 : 1984 : R2002 | Standard Performance and Safety Specification for Cryosurgical Medical Instruments (Withdrawn 2011) |
BS EN 60601-2-43:2010 | Medical electrical equipment Particular requirements for basic safety and essential performance of X-ray equipment for interventional procedures |
ANSI/AAMI ST55:2016 | TABLE-TOP STEAM STERILIZERS |
09/30181956 DC : DRAFT MAY 2009 | BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
ASTM F 2042 : 2000 : R2005 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
AAMI ST67 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS AND GUIDANCE FOR SELECTING A STERILITY ASSURANCE LEVEL (SAL) FOR PRODUCTS LABELED 'STERILE' |
BS PAS 84(2008) : 2008 | REGENERATIVE MEDICINE - GLOSSARY |
SAE AS 8056 : 2004(R2016) | MINIMUM DESIGN AND PERFORMANCE OF AIRPLANE GALLEY IN-FLIGHT CARTS, CONTAINERS, AND ASSOCIATED COMPONENTS |
AAMI TIR67 : 2018 | PROMOTING SAFE PRACTICES PERTAINING TO THE USE OF STERILANT AND DISINFECTANT CHEMICALS IN HEALTH CARE FACILITIES |
AAMI ST72 : 2011 : R2016 | BACTERIAL ENDOTOXIN - TEST METHODS, ROUTINE MONITORING AND ALTERNATIVES TO BATCH TESTING |
ASTM F 2042 : 2000 : EDT 1 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
ASTM F 1672 : 2014 : REDLINE | Standard Specification for Resurfacing Patellar Prosthesis |
ASTM F 2529 : 2013 | Standard Guide for <emph type="bdit">in vivo</emph> Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM) |
CSA C22.2 No. 61010.1 : 2012 : FR | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
ISO 5841-2:2014 | Implants for surgery Cardiac pacemakers Part 2: Reporting of clinical performance of populations of pulse generators or leads |
AAMI ST24 : 1999 : R2005 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
AAMI TIR45 : 2012 | GUIDANCE ON THE USE OF AGILE PRACTICES IN THE DEVELOPMENT OF MEDICAL DEVICE SOFTWARE |
ARINC 805 : 2014 | FIBER OPTIC TEST PROCEDURES |
ASTM F 881 : 1994 : R2000 | Standard Specification for Silicone Elastomer Facial Implants |
AAMI TIR 12 : 2010 | DESIGNING, TESTING, AND LABELING REUSABLE MEDICAL DEVICES FOR REPROCESSING IN HEALTH CARE FACILITIES: A GUIDE FOR MEDICAL DEVICE MANUFACTURERS |
ASTM F 2027 : 2016 : REDLINE | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
ASTM E 2641 : 2009 | Standard Practice for Best Practices for Safe Application of 3D Imaging Technology |
ASTM F 2150 : 2013 : REDLINE | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products |
ASTM F 2407 : 2006 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
ASTM F 2887 : 2017 : REDLINE | Standard Specification for Total Elbow Prostheses |
ASTM F 2224 : 2009 : R2014 | Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
ASTM F 2383 : 2011 : REDLINE | Standard Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs) |
ASTM F 754 : 2008 : R2015 | Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders |
ASTM F 2394 : 2007 : R2013 | Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System |
ASTM F 1609 : 2008 : R2014 | Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
ASTM F 1609 : 2008 | Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
ASTM F 1581 : 2008 : R2016 | Standard Specification for Composition of Anorganic Bone for Surgical Implants |
IEC 60601-2-43:2010+AMD1:2017 CSV | Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
ISO/TR 18112:2006 | Clinical laboratory testing and in vitro diagnostic test systems In vitro diagnostic medical devices for professional use Summary of regulatory requirements for information supplied by the manufacturer |
SCTE 186 : 2016 | PRODUCT ENVIRONMENTAL REQUIREMENTS FOR CABLE TELECOMMUNICATIONS |
Z462-18 | Workplace electrical safety |
ANSI/AAMI ST79:2017 | COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES |
I.S. EN ISO 14630:2012 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2012) |
NEMA XR 31:2016 | Standard Attributes on X-ray Equipment for Interventional Procedures |
NEMA/MITA 1:2015 | Good Refurbishment Practices for Medical Imaging Equipment |
NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
SAE ARP 5293 : 2010 | SAFETY CONSIDERATIONS FOR LASERS PROJECTED IN THE NAVIGABLE AIRSPACE |
I.S. EN ISO 9919:2009 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
DD ISO/TS 12417:2011 | Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products |
AAMI TIR36 : 2007 | VALIDATION OF SOFTWARE FOR REGULATED PROCESSES |
AAMI TIR72 : 2017 | DIALYSIS FLUID CHEMICAL COMPOSITION |
ANSI/AAMI EQ56:2013 | RECOMMENDED PRACTICES FOR A MEDICAL EQUIPMENT MANAGEMENT PROGRAM |
ANSI/AAMI NS4:2013(R2017) | TRANSCUTANEOUS ELECTRICAL NERVE STIMULATORS |
AAMI ST24 : 1999 : R2009 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
BS EN ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products General requirements |
ASTM F 2312 : 2011 : REDLINE | Standard Terminology Relating to Tissue Engineered Medical Products |
CSA C22.2 No. 61010.1 :2012 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
ANSI/AAMI EQ89:2015 | GUIDANCE FOR THE USE OF MEDICAL EQUIPMENT MAINTENANCE STRATEGIES AND PROCEDURES |
AAMI ST72 : 2011 | BACTERIAL ENDOTOXIN - TEST METHODS, ROUTINE MONITORING AND ALTERNATIVES TO BATCH TESTING |
AAMI TIR50 : 2014 | POST-MARKET SURVEILLANCE OF USE ERROR MANAGEMENT |
CSA Z9919 :2007 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
DIN ISO 13022:2014-06 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES (ISO 13022:2012) |
SAE ARP 5873 : 2015 | LED PASSENGER READING LIGHT ASSEMBLY |
AAMI ISO 5841-2 : 2014 | IMPLANTS FOR SURGERY - CARDIAC PACEMAKERS - PART 2: REPORTING OF CLINICAL PERFORMANCE OF POPULATIONS OF PULSE GENERATORS OR LEADS |
ANSI/AAMI PB70:2012 | LIQUID BARRIER PERFORMANCE AND CLASSIFICATION OF PROTECTIVE APPAREL AND DRAPES INTENDED FOR USE IN HEALTH CARE FACILITIES |
AAMI TIR48 : 2015 | QUALITY MANAGEMENT SYSTEM (QMS) RECOMMENDATIONS ON THE APPLICATION OF THE U.S. FDAS CGMP FINAL RULE ON COMBINATION PRODUCTS |
AAMI ST65 : 2008 | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
AAMI ST24:1999(R2018) | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
CEN/TR 15640:2007 | Health informatics - Measures for ensuring the patient safety of health software |
EN 60601-2-43:2010/A1:2018 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-43: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR INTERVENTIONAL PROCEDURES (IEC 60601-2-43:2010/A1:2017) |
ASTM E 2981 : 2015 | Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
ASTM D 5258 : 2002 | Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating |
SAE ARP 5674 : 2012 | SAFETY CONSIDERATIONS FOR AIRCRAFT-MOUNTED LASERS PROJECTED INTO THE NAVIGABLE AIRSPACE |
ASTM F 2903 : 2011 | Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair (Withdrawn 2020) |
ASTM F 2212 : 2011 : REDLINE | Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
ASTM E 2662 : 2015 : REDLINE | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM F 881 : 1994 : R2006 | Standard Specification for Silicone Elastomer Facial Implants |
ASTM E 94 : 2004 | Standard Guide for Radiographic Examination |
CAN/CSA-C22.2 NO. 61010-1-12 (R2017) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
ASTM F 2042 : 2000 : R2011 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication |
EN ISO 80601-2-61:2011 | Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011) |
I.S. EN 61223-3-2:2008 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-2: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF MAMMOGRAPHIC X-RAY EQUIPMENT |
IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
BS EN ISO 9919:2009 | Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
IEC 61223-3-2:2007 | Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment |
CSA C22.2 No. 60950-1 :2007 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
ISA 61010-1 : 2008 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
EN ISO 9919:2009 | Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005) |
UNI EN ISO 14630 : 2013 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
NSF T-BUTANOL : 2003 | T-BUTANOL |
ASTM F 2394 : 2007 | Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System |
UNE-EN 60601-2-44:2010 | Medical electrical equipment -- Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
BS ISO 5841-2:2014 | Implants for surgery. Cardiac pacemakers Reporting of clinical performance of populations of pulse generators or leads |
CLSI MM14 A : 1ED 2005 | PROFICIENCY TESTING (EXTERNAL QUALITY ASSESSMENT) FOR MOLECULAR METHODS |
12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
PD ISO/TR 27809:2007 | Health informatics. Measures for ensuring patient safety of health software |
AAMI BF64 : 2012 | LEUKOCYTE REDUCTION FILTERS |
PD IEC/PAS 63077:2016 | Good refurbishment practices for medical imaging equipment |
DI-TCSP-82040 Base Document:2016 | RESEARCH AND DEVELOPMENT OF MEDICAL PRODUCTS REGULATED BY THE U.S. FOOD AND DRUG ADMINISTRATION (FDA) |
IEEE N42.46-2008 | American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening |
PD CEN/TR 15640:2007 | Health informatics. Measures for ensuring the patient safety of health software |
AAMI TIR14 : 2016 | CONTRACT STERILIZATION USING ETHYLENE OXIDE |
BS ISO 18190:2016 | Anaesthetic and respiratory equipment. General requirements for airways and related equipment |
MIL-HDBK-828 Revision C:2017 | RANGE LASER SAFETY |
AAMI NS4 :2013 | TRANSCUTANEOUS ELECTRICAL NERVE STIMULATORS |
I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
I.S. EN 62148-17:2014 | FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
AAMI ST67 : 2011 : R2017 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS AND GUIDANCE FOR SELECTING A STERILITY ASSURANCE LEVEL (SAL) FOR PRODUCTS LABELED 'STERILE' |
AAMI TIR55 : 2014 | HUMAN FACTORS ENGINEERING FOR PROCESSING MEDICAL DEVICES |
AAMI TIR52 : 2014 | ENVIRONMENTAL MONITORING FOR TERMINALLY STERILIZED HEALTHCARE PRODUCTS |
UNE-EN ISO 12417-1:2016 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
ISO/TR 12417-2:2017 | Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 2: Local regulatory information |
ASTM D 5765 : 2016 : REDLINE | Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating |
AAMI TIR69 : 2017 | RISK MANAGEMENT OF RADIO-FREQUENCY WIRELESS COEXISTENCE FOR MEDICAL DEVICES AND SYSTEMS |
AAMI ISO 12417-1 : 2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS |
ANSI Z80.11 : 2012 : R2017 | OPHTHALMICS - LASER SYSTEMS FOR CORNEAL RESHAPING |
SCTE 203 : 2014 | PRODUCT ENVIRONMENTAL REQUIREMENTS FOR CABLE TELECOMMUNICATIONS FACILITIES - TEST METHODS |
ASTM F 2038 : 2000 : R2005 | Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
NFPA 1582 : 2018 | COMPREHENSIVE OCCUPATIONAL MEDICAL PROGRAM FOR FIRE DEPARTMENTS |
IEEE 730-2014 REDLINE | IEEE Standard for Software Quality Assurance Processes |
ANSI/AAMI/ISO TIR16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
FAA AC 25-10 : 0 | GUIDANCE FOR INSTALLATION OF MISCELLANEOUS, NON-REQUIRED ELECTRICAL EQUIPMENT |
EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
ASTM F 881 : 1994 : R2014 | Standard Specification for Silicone Elastomer Facial Implants |
ASTM F 2038 : 2000 : R2011 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials |
ASTM F 1781 : 2015 : REDLINE | Standard Specification for Elastomeric Flexible Hinge Finger Total Joint Implants |
ASTM F 2665 : 2009 : R2014 | Standard Specification for Total Ankle Replacement Prosthesis |
ASTM F 2042 : 2000 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
ISO 13022:2012 | Medical products containing viable human cells — Application of risk management and requirements for processing practices |
ISO/ASTM 51261:2013 | Practice for calibration of routine dosimetry systems for radiation processing |
I.S. EN 60601-2-43:2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-43: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR INTERVENTIONAL PROCEDURES |
I.S. EN 60601-2-44:2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY |
EN 60601-2-44:2009/A2:2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY (IEC 60601-2-44:2009/A2:2016) |
DIN EN ISO 14630:2013-03 | Non-active surgical implants - General requirements (ISO 14630:2012) |
ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices Guidance on the application of ISO 11607-1 and ISO 11607-2 |
IEC 61223-2-6:2006 | Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests imaging performance of computed tomography X-ray equipment |
CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
IEC 62148-17:2013 | Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors |
IEC 60601-1-2:2007 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements |
BS EN 61223-2-6:2007 | Evaluation and routine testing in medical imaging departments Constancy tests. Imaging performance of computed tomography X-ray equipment |
UNI CEN ISO/TS 16775 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
EN ISO 14630:2012 | Non-active surgical implants - General requirements (ISO 14630:2012) |
EN ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
I.S. EN ISO 80601-2-61:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
AAMI ISO TIR 12417 : 2011 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS |
ASTM E 2941 : 2014 : REDLINE | Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion |
CSA C22.2 No. 80601-2-61 : 2014(R2019) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
FAA AC 20-183 : 2014 | LASER AIRWORTHINESS INSTALLATION GUIDANCE |
AAMI TIR16 : 2017 | MICROBIOLOGICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION |
ASTM F 1441 : 2003 | Standard Specification for Soft-Tissue Expander Devices |
S.R. CEN TR 15640:2007 | HEALTH INFORMATICS - MEASURES FOR ENSURING THE PATIENT SAFETY OF HEALTH SOFTWARE |
10/30203224 DC : 0 | BS ISO 13022 - MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES |
BS ISO 18362:2016 | Manufacture of cell-based health care products. Control of microbial risks during processing |
DIN EN ISO 18113-1:2013-01 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
SAE ARP 6253 : 2017 | LEDS AND AIRCRAFT APPLICATIONS |
NFPA 115 : 2016 | LASER FIRE PROTECTION |
ANSI/AAMI ST58:2013(R2018) | CHEMICAL STERILIZATION AND HIGH-LEVEL DISINFECTION IN HEALTH CARE FACILITIES |
ANSI/AAMI ST90:2017 | PROCESSING OF HEALTH CARE PRODUCTS - QUALITY MANAGEMENT SYSTEMS FOR PROCESSING IN HEALTH CARE FACILITIES |
IEEE N42.44-2008 | American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems |
AAMI TIR37 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - GUIDANCE ON STERILIZATION OF BIOLOGICS AND TISSUE-BASED PRODUCTS |
ANSI/AAMI/ISO 13022:2012 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES |
FAA AC 70-1 : 2004 | OUTDOOR LASER OPERATIONS |
07/30166162 DC : 0 | BS IEC 60601-2-44 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-44: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY |
ASTM E 94/E94M : 2017 : REDLINE | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
AAMI TIR15 : 2016 | PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION |
C22.2 NO. 243-17 | Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) |
AAMI HE75 : 2009 | HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES |
AAMI QSR : 1996 | QUALITY SYSTEM REGULATION (21 CFR PARTS 808, 812 AND 820) - OCTOBER 1996 |
ISO 18190:2016 | Anaesthetic and respiratory equipment — General requirements for airways and related equipment |
ASTM F 2091 : 2015 : REDLINE | Standard Specification for Acetabular Prostheses |
I.S. EN ISO 12417-1:2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015) |
UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
ASTM E 1570 : 2011 : REDLINE | PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION |
SAE ARP 6161 : 2011 | FLIGHT COMPARTMENT GLARE |
CAN/CSA C22.2 No. 60601.2.43 : 2011(R2016) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-43: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY EQUIPMENT FOR INTERVENTIONAL PROCEDURES |
ASTM F 1441 : 2003 : R2009 | Standard Specification for Soft-Tissue Expander Devices |
ASTM F 1538 : 2003 : R2017 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
ASTM E 2698 : 2010 | Standard Practice for Radiological Examination Using Digital Detector Arrays |
ASTM E 2982 : 2014 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
ASTM F 1581 : 2008 : EDT 1 | Standard Specification for Composition of Anorganic Bone for Surgical Implants |
ASTM F 1538 : 2003 : EDT 1 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
ASTM E 1255 : 2016 : REDLINE | Standard Practice for Radioscopy |
ASTM F 1441 : 2003 : R2014 | Standard Specification for Soft-Tissue Expander Devices |
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
ASTM F 2224 : 2009 | Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
ASTM F 1581:2008 | Standard Specification for Composition of Anorganic Bone for Surgical Implants |
ASTM F 2211 : 2013 | Standard Classification for Tissue Engineered Medical Products (TEMPs) |
ASTM F 2083 : 2012 : REDLINE | Standard Specification for Knee Replacement Prosthesis |
ISO 9919:2005 | Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
ISO 14630:2012 | Non-active surgical implants General requirements |
EN 61223-2-6:2007 | Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment |
EN 61223-3-2:2008 | Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment |
CEI EN 62148-17 : 2014 | FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.