CSA C22.2 No. 168 : 2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF
19-02-2020
English
01-01-2016
PREFACE
1 Scope
2 General
3 Definitions
4 Construction Requirements Applicable To All Dishwashers
5 Construction Requirements Unique To Gas-Fired Dishwashers
6 Reduction Of Risk Of Injury To Persons - Requirements
Applicable To All Dishwashers
7 Performance Requirements Applicable To All Dishwashers
8 Performance Requirements Unique To Electrically-Heated
Dishwashers
9 Performance Requirements Unique To Gas-Fired Dishwashers
10 Manufacturing And Production Tests Unique To
Electrically-Heated Dishwashers
11 Manufacturing And Production Tests Unique To
Gas-Fired Dishwashers
12 Rating Requirements Applicable To All Dishwashers
13 Marking Requirements Applicable To All Dishwashers
14 Marking Requirements Unique To Electrically-Heated
Dishwashers
15 Marking Requirements Unique To Gas-Fired Dishwashers
16 Installation Instructions Applicable to All Dishwashers
17 Installation Instruction Requirements Unique to
Electrically-Heated Dishwashers
18 Installation Instruction Requirements Unique To
Gas-Fired Dishwashers
SUPPLEMENT SA - COMMERCIAL DISHWASHERS SELF-CONTAINED
CONDENSING SYSTEMS
SUPPLEMENT SB - EVALUATION OF ELECTRONIC CIRCUITS (Normative)
APPENDIX B - Marking - French Translations
Contains commercial, freestanding, under-counter, and counter-insert dishwashers, utensil-washers, and glass washers using water as the principal cleaning medium, hereafter referred to as dishwashers.
| DevelopmentNote |
Supersedes CGA 1.12. Also numbered as ANSI Z83.21 and UL 921 (04/2006)
|
| DocumentType |
Standard
|
| Pages |
131
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| CSA C22.2 No. 167 : 2017 | HOUSEHOLD DISHWASHERS |
| UL 1411:7ED 2016-01 | Standard for Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances |
| CSA C22.2 No. 38 : 2014 | THERMOSET-INSULATED WIRES AND CABLES |
| UL 863:8ED 2007-11 | Standard for Time-Indicating and -Recording Appliances |
| ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| UL 1557 : 5 | ELECTRICALLY ISOLATED SEMICONDUCTOR DEVICES |
| CSA C22.2 No. 60730-2-5 : 2014 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS |
| UL 514A:11ED 2013-02 | Metallic Outlet Boxes |
| UL 60065:8ED 2015-09 | Standard for Audio, Video and Similar Electronic Apparatus - Safety Requirements |
| UL 50:13ED 2015-10 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
| UL 5085-3:1ED 2006-04 | Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers |
| IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
| UL 61131-2:2ED 2008-06 | Programmable Controllers - Part 2: Equipment Requirements and Tests |
| C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
| CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
| CSA C22.2 No. 77 : 2014 | MOTORS WITH INHERENT OVERHEATING PROTECTION |
| ANSI Z21.22 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| UL 506:14ED 2017-06 | Specialty Transformers |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| UL 4248-11:1ED 2007-02 | Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse |
| UL 60335-1:6ED 2016-10 | Standard for Safety of Household and Similar Appliances, Part 1: General Requirements |
| CSA C22.2 No. 21 : 2014 | CORD SETS AND POWER-SUPPLY CORDS |
| CSA C22.2 No. 24 : 2015 | TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT |
| UL 795:8ED 2016-12 | Commercial-Industrial Gas Heating Equipment |
| UL 935:10ED 2001-05 | Fluorescent-Lamp Ballasts |
| UL 83:16ED 2017-07 | Standard for Thermoplastic-Insulated Wires and Cables |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| CSA C22.2 No. 0.2 : 2016 | INSULATION COORDINATION |
| UL 943:5ED 2016-05 | Ground-Fault Circuit-Interrupters |
| UL 917:5ED 2006-11 | Standard for Clock-Operated Switches |
| CSA 4.4 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
| UL 4248-9:1ED 2007-02 | Fuseholders - Part 9: Class K |
| IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV | Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links |
| C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
| UL 66 : 1 | FIXTURE WIRE |
| UL 60730-2-9:4ED 2017-02 | Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls |
| IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| UL 514C:4ED 2014-04 | Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| CSA C22.2 No. 65 : 2013 | WIRE CONNECTORS |
| UL 248-11:3ED 2011-05 | Low-Voltage Fuses - Part 11: Plug Fuses |
| UL 1977 : 3 | COMPONENT CONNECTORS FOR USE IN DATA, SIGNAL, CONTROL AND POWER APPLICATIONS |
| CSA C22.2 No. 188 : 2013 | SPLICING WIRE CONNECTORS |
| CSA E60730.1 : 2015 | Automatic electrical controls for household and similar use — Part 1: General requirements |
| CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
| ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| C22.2 NO. 8-13 (R2018) | Electromagnetic interference (EMI) filters |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| UL 372:6ED 2007-07 | Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components |
| CSA C22.2 No. 250.4 : 2014 | PORTABLE LUMINAIRES |
| CSA C22.2 No. 210 : 2015 | APPLIANCE WIRING MATERIAL PRODUCTS |
| CSA C22.2 No. 127 : 2015 | EQUIPMENT AND LEAD WIRES |
| CSA C22.2 No. 182.3 : 2016 | SPECIAL USE ATTACHMENT PLUGS, RECEPTACLES, AND CONNECTORS |
| C22.2 NO. 75-17 | Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017) |
| CSA C22.2 No. 100 : 2014 | MOTORS AND GENERATORS |
| UL 746A:6ED 2012-09 | Polymeric Materials - Short Term Property Evaluations |
| UL 429:7ED 2013-11 | Electrically Operated Valves |
| C22.2 NO. 4248.1-17 | Fuseholders Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE) |
| UL 248-1 : 3 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| UL 60730-1:5ED 2016-08 | Automatic Electrical Controls - Part 1: General Requirements |
| UL 4248-6:1ED 2007-02 | Fuseholders - Part 6: Class H |
| UL 4248-15:1ED 2007-02 | Fuseholders - Part 15: Class T |
| CSA C22.2 No. 74 : 2016 | EQUIPMENT FOR USE WITH ELECTRIC DISCHARGE LAMPS |
| UL 4248-4:1ED 2007-02 | Fuseholders - Part 4: Class CC |
| UL 1004-2:2ED 2014-01 | Standard for Impedance Protected Motors |
| CSA C22.2 No. 14 : 2013 | INDUSTRIAL CONTROL EQUIPMENT |
| CSA C22.2 No. 55 : 2015 | SPECIAL USE SWITCHES |
| ASTM F 2474 : 2017 : REDLINE | Standard Test Method for Heat Gain to Space Performance of Commercial Kitchen Ventilation/Appliance Systems |
| UL 496:14ED 2017-09 | Lampholders |
| IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
| ASTM F 1920 : 2015 : REDLINE | Standard Test Method for Performance of Rack Conveyor Commercial Dishwashing Machines |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.