Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

C22.2 NO. 1993-17

Current
Current

The latest, up-to-date edition.

Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2017

Preface
1 Scope
2 Reference Publications
3 Definitions
4 General Requirements
5 Mechanical Construction
6 Electrical Construction
7 Environmental Locations
8 Tests
9 Test Apparatus
10 Device Markings
SUPPLEMENT SA - SUPPLEMENTAL REQUIREMENTS FOR LIGHT-EMITTING
                DIODES (LED)
SUPPLEMENT SB - ADDITIONAL REQUIREMENTS FOR SOLID-STATE LAMPS
                CONTAINING SILICONE FLUID
SUPPLEMENT SC - ADDITIONAL REQUIREMENTS FOR LED LAMPS AND
                FLUORESCENT LAMP ADAPTERS INTENDED AS DIRECT
                REPLACEMENTS FOR FLUORESCENT LAMPS
ANNEX A (normative) - Standards for Components
ANNEX B (CAN) (normative) - Markings - French Translations
ANNEX C (MEX) (normative) - Markings - Spanish Translations
ANNEX D (normative) - Manufacturing and Production Tests
ANNEX E (CAN) (normative) - Printed Circuit Boards
ANNEX F (informative) - Pictograms
ANNEX G (informative) - Metric Conversion Information

Pertains to cover both self-ballasted lamps and self-ballasted lamp adapters rated 120 to 347 V AC nominal for connection to screw-base, pin-base, or recessed single contact (RSC or R7) lampholders.

Preface This is the harmonized ANCE, CSA Group, and UL standard for Self-Ballasted Lamps and Lamp Adapters. It is the third edition of NMX-J-578/1-ANCE, the third edition of CSA C22.2 No. 1993, and the fifth edition of UL 1993. This edition of CSA C22.2 No. 1993 supersedes the previous edition published in 2012. This harmonized standard has been jointly revised on March 26, 2021. For this purpose, CSA Group and UL are issuing revision pages dated March 26, 2021, and ANCE is issuing a new edition dated March 26, 2021. This harmonized standard was prepared by the Association of Standardization and Certification (ANCE), CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Committee for Self-Ballasted Lamps, of the Council of the Harmonization of Electrotechnical Standards for the Nations of the Americas (CANENA), are gratefully acknowledged. In Canada, for general information on the Standards of the Canadian Electrical Code, Part II, see the preface to CAN/CSA-C22.2 No. 0. Scope 1.1 These requirements are intended to cover both self-ballasted lamps and self-ballasted lamp adapters rated 120 to 347 V AC nominal for connection to screw-base, pin-base, or recessed single contact (RSC or R7) lampholders. These devices are intended for use in accordance with the National Electrical Code, ANSI/NFPA 70, and the Canadian Electrical Code Part I, CSA C22.1, in non-hazardous locations, and the Instalaciones Elctricas (utilizacin), NOM-001-SEDE. 1.2 These devices incorporate resistance, reactance, or electronic (solid-state) type ballasts or power supplies. These devices employ various lamp technologies including, but not limited to, incandescent, fluorescent, high-intensity discharge lamps, light-emitting diodes. 1.3 These requirements also include Supplemental Requirements for Light-Emitting Diodes (LED), Supplement SA, for: a) Self-contained LED lamps, rated 120 to 347 V AC nominal for connection to screw-, pinbase, and recessed single contact (RSC or R7) lampholders b) Lamps for replacement of an ANSI standardized fluorescent lamp, and consisting of lightemitting-diode (LED) lamp technologies, with control circuitry, and a driver or power supply. The LED driver and control circuitry will be either integral with the lamp or remote from the lampand c) Component LED lamps, with or without control circuitry, an ANSI base other than bases mentioned in (a), for connection to LED driver having a low voltage output, such as replacement for tungsten-halogen, MR11 and MR16 shaped lamps. 1.4 This standard does not apply to medium-to-medium base (E26) fittings that incorporate controls such as photocells, motion detectors, radio controls, or dimmers covered by other standards. 1.5 These devices are not intended for use with emergency exit fixtures or emergency exit lights.

DevelopmentNote
Also numbered as NMX-J-578/1-ANCE & UL 1993. (09/2009) This standard was just updated in our system however it was originally released on 08-2018
DocumentType
Standard
ISBN
978-1-77139-711-7
Pages
218
PublisherName
Canadian Standards Association
Status
Current
Supersedes

CSA C861:2010 PERFORMANCE OF SELF-BALLASTED COMPACT FLUORESCENT LAMPS AND BALLASTED ADAPTERS
CSA C22.2 No. 37 : 2017 DECORATIVE LIGHTING PRODUCTS
CSA C22.2 No. 250.1 : 2016 RETROFIT KITS FOR LUMINAIRE CONVERSION
CSA C22.2 No. 62560 : 2016 SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS
CSA C22.2 No. 207 : 2015 PORTABLE AND STATIONARY ELECTRIC SIGNS AND DISPLAYS
CSA C861 : 2010 : INC : UPD 1 : 2012 PERFORMANCE OF SELF-BALLASTED COMPACT FLUORESCENT LAMPS AND BALLASTED ADAPTERS
CSA C22.2 No. 61347-2-13 : 2015(R2020) LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES
CSA C22.2 No. 250.4 : 2014 PORTABLE LUMINAIRES
C866-17 Performance of LED luminaires
CSA C22.2 No. 250.13 : 2017 LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS
CSA C22.2 No. 62031 : 2013(R2018) LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS
CSA C22.2 No. 166 : 2015 STAGE AND STUDIO LUMINAIRES
CSA C861 : 2010 : R2015 PERFORMANCE OF SELF-BALLASTED COMPACT FLUORESCENT LAMPS AND BALLASTED ADAPTERS
CAN/CSA-C875-13 (R2018) Performance of general service directional lamps
CSA C22.2 No. 61347-2-13 : 2015 LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES

IEC 61347-2-3:2011+AMD1:2016 CSV Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
ANSI C81.62 : 2017 ELECTRIC LAMPHOLDERS
IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
CSA C22.2 No. 223 : 2015 POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS
UL 5085-3:1ED 2006-04 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
IEC 61048:2006+AMD1:2015 CSV Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
CSA C22.2 No. 60065 : 2016 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
CSA C22.2 No. 49 : 2014 FLEXIBLE CORDS AND CABLES
UL 506:14ED 2017-06 Specialty Transformers
ANSI C78.81:2016 American National Standard for Electric Lamps—Double-Capped Fluorescent Lamps—Dimensional and Electrical Characteristics
IEC 61347-2-9:2012 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
UL 935:10ED 2001-05 Fluorescent-Lamp Ballasts
UL 83:16ED 2017-07 Standard for Thermoplastic-Insulated Wires and Cables
ANSI C81.61 : 2017 ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS
NFPA 704 : 2017 STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE
IEC 60400:2017 Lampholders for tubular fluorescent lamps and starterholders
C22.2 NO. 43-17 Lampholders (Binational standard with UL 496)
CSA C22.2 No. 250.13 : 2017 LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS
IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 61347-2-4:2000 Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting
ASTM D 1525 : 2017 Standard Test Method for Vicat Softening Temperature of Plastics
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
ISA MC96.1 : 1982 TEMPERATURE MEASUREMENT THERMOCOUPLES
UL 101:6ED 2017-07 Leakage Current for Utilization Equipment
IEC 62035:2014+AMD1:2016 CSV Discharge lamps (excluding fluorescent lamps) - Safety specifications
ANSI C82.3-2016 American National Standard for Reference Ballasts for Fluorescent Lamps
CSA C22.2 No. 0.15 : 2015 ADHESIVE LABELS
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
ANSI C78.375 : A2014 ELECTRIC LAMPS - FLUORESCENT LAMPS - GUIDE FOR ELECTRICAL MEASURES
CSA C22.2 No. 210 : 2015 APPLIANCE WIRING MATERIAL PRODUCTS
CSA C22.2 No. 127 : 2015 EQUIPMENT AND LEAD WIRES
UL 746A:6ED 2012-09 Polymeric Materials - Short Term Property Evaluations
UL 60730-1:5ED 2016-08 Automatic Electrical Controls - Part 1: General Requirements
CSA C22.2 No. 74 : 2016 EQUIPMENT FOR USE WITH ELECTRIC DISCHARGE LAMPS
ANSI C78.24:2001 American National Standard for Electric Lamps—Two-inch (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases
UL 1577:5ED 2014-04 Optical Isolators
CSA C22.2 No. 256 : 2014 DIRECT PLUG-IN NIGHTLIGHTS
ASTM D 1000 : 2017 : REDLINE Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
UL 496:14ED 2017-09 Lampholders
CSA E60384.14 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
IEC 61347-2-8:2000+AMD1:2006 CSV Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61184:2017 Bayonet lampholders
ANSI C78.901:2016 American National Standard for Electric Lamps—Single-Based Fluorescent Lamps—Dimensional and Electrical Characteristics
ANSI C81.63 : 2007(R2014) GAUGES FOR ELECTRIC LAMP BASES AND LAMPHOLDERS
UL 2097:4ED 2006-12 Reference Standard for Double Insulation Systems for Use in Electronic Equipment

View more information
$1,115.96
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more