|
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
|
|
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
|
CSA C22.2 No. 94.1 : 2015
|
ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS
|
|
ISO 4892-1:2016
|
Plastics Methods of exposure to laboratory light sources Part 1: General guidance
|
|
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
|
|
IEC 60245-1:2003+AMD1:2007 CSV
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
|
|
IEC 60664-4:2005
|
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
|
|
IEC 60216-6:2006
|
Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
|
|
C22.1-15
|
Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
|
|
ISO 9614-1:1993
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
|
|
CSA C22.2 No. 0.4 : 2004(R2013)
|
BONDING OF ELECTRICAL EQUIPMENT
|
|
CSA C22.2 No. 21 : 2014
|
CORD SETS AND POWER-SUPPLY CORDS
|
|
IEC 60216-4-1:2006
|
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
|
|
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength
|
|
IEC 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
|
|
ISO 9614-2:1996
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
|
|
IEC 60216-2:2005
|
Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
|
|
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
|
|
IEC 60227-1:2007
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
|
|
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation
|
|
ISO 262:1998
|
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
|
|
ISO 3746:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
|
|
CSA C22.2 No. 60529 : 2016
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
|
|
ISO 180:2000
|
Plastics Determination of Izod impact strength
|
|
CSA E60730.1 : 2015
|
Automatic electrical controls for household and similar use — Part 1: General requirements
|
|
IEC 60755:2017
|
General safety requirements for residual current operated protective devices
|
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
|
|
ISO 9614-3:2002
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
|
|
ISO 4892-4:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
|
IEC 62020:1998+AMD1:2003 CSV
|
Electrical accessories - Residual current monitors for household and similar uses (RCMs)
|
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
|
ISO 261:1998
|
ISO general purpose metric screw threads General plan
|
|
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
|
|
IEC 61180-1:1992
|
High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
|
|
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols
|
|
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
|
IEC 60216-5:2008
|
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
|
|
IEC 61032:1997
|
Protection of persons and equipment by enclosures - Probes for verification
|
|
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
|
|
IEC 60695-11-5:2016
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
|
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
|
IEC 60216-1:2013
|
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
|
|
IEC 60216-3:2006
|
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
|
|
IEC 60990:2016
|
Methods of measurement of touch current and protective conductor current
|
|
CSA C22.2 No. 94.2 : 2015
|
ENCLOSURES FOR ELECTRICAL EQUIPMENT, ENVIRONMENTAL CONSIDERATIONS
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.