|
IEC 61025:2006
|
Fault tree analysis (FTA)
|
|
ANSI NGV2 : 2016
|
COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS
|
|
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
|
|
C22.1-15
|
Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
|
|
CSA C22.2 No. 60079-15 : 2016
|
EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
|
|
CAN/CSA-C22.2 NO. 61508-2:17
|
Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (Adopted IEC 61508-2:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 2 : Exigences pour les systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité (norme IEC 61508-2:2010 adoptee, deuxième édition, 2010-04, avec exigences propres au Canada)
|
|
CSA B51 : 2014
|
BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
|
|
IEC 60812:2006
|
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
|
|
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
|
|
IEC TS 62282-1:2013
|
Fuel cell technologies - Part 1: Terminology
|
|
CSA C22.2 No. 60079.0 : 2015
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
|
|
ISO 4672:1997
|
Rubber and plastics hoses Sub-ambient temperature flexibility tests
|
|
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
|
|
ISO 188:2011
|
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
|
|
IEC 60079-20-1:2010
|
Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
|
|
ANSI PRD 1 : 2013(R2018)
|
PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS
|
|
IEC 62040-1:2017 EXV
|
UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS
|
|
CGA 12.6 : M94(R1999)
|
VEHICLE REFUELLING APPLIANCES
|
|
EN 50178:1997
|
Electronic equipment for use in power installations
|
|
CSA C22.2 No. 65 : 2013
|
WIRE CONNECTORS
|
|
CSA C22.2 No. 60529 : 2016
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
|
|
SAE J 1739 : 2009
|
POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA)
|
|
CSA E60730.1 : 2015
|
Automatic electrical controls for household and similar use — Part 1: General requirements
|
|
CSA C22.2 No. 301 : 2016
|
INDUSTRIAL ELECTRICAL MACHINERY
|
|
IEC 62282-3-100:2012
|
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
|
|
CAN/CSA-C22.2 NO. 61508-1:17
|
Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 1: General requirements (Adopted IEC 61508-1:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 1 : Exigences générales (norme IEC 61508-1:2010 adoptée, deuxième édition, 2010-04, avec exigences propres au Canada)
|
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
|
BS EN 13184:2001
|
Non-destructive testing. Leak testing. Pressure change method
|
|
ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies Hydrostatic testing
|
|
CSA C22.2 No. 107.1 : 2016
|
POWER CONVERSION EQUIPMENT
|
|
ISO 1307:2006
|
Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
|
|
CAN/CSA-C22.2 NO. 61508-3:17
|
Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 3: Software requirements (Adopted IEC 61508-3:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 3 : Exigences concernant les logiciels (norme IEC 61508-3:2010 adoptée, deuxième édition, 2010-04, avec exigences propres au Canada)
|
|
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV
|
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
|
|
ISO 1436:2017
|
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification
|
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
|
|
ISO 23550:2011
|
Safety and control devices for gas burners and gas-burning appliances General requirements
|
