CSA ISO/IEC 14762 : 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
31-08-2020
English
01-01-2015
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Conformance
5 General requirements
6 Requirements for functional safety
Annex A (informative) - Example of a method for the
determination of safety integrity levels
Annex B (informative) - Hazards and development of
necessary functional safety requirements
Annex C (informative) - Some examples of non safety
related HBES applications
Bibliography
Specifies the requirements for functional safety for Home and Building Electronic Systems (HBES) products and systems, a multi-application bus system where the functions are decentralised, distributed and linked through a common communication process.
DevelopmentNote |
Supersedes CSA ISO/IEC TR 14762. (12/2010)
|
DocumentType |
Standard
|
Pages |
48
|
PublisherName |
Canadian Standards Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO/IEC 14762:2009 | Identical |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
IEC 60038:2009 | IEC standard voltages |
IEC GUIDE 110:2014 | Home control systems - Guidelines relating to safety |
ISO/IEC TR 14762:2001 | Information technology Home Control Systems Guidelines for functional safety |
ISO/IEC TR 15067-3:2000 | Information technology Home Electronic Systems (HES) application model Part 3: Model of an energy management system for HES |
IEC 61000-6-4:2006+AMD1:2010 CSV | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ISO/IEC 15018:2004 | Information technology Generic cabling for homes |
ISO/IEC 14543-3-6:2007 | Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair |
ISO/IEC 14543-3-7:2007 | Information technology Home electronic system (HES) architecture Part 3-7: Media and media dependent layers Radio frequency for network based control of HES Class 1 |
ISO/IEC 14709-1:1997 | Information technology Configuration of Customer Premises Cabling (CPC) for applications Part 1: Integrated Services Digital Network (ISDN) basic access |
EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ISO/IEC 15045-1:2004 | Information technology Home Electronic System (HES) gateway Part 1: A residential gateway model for HES |
ISO/IEC TR 15067-2:1997 | Information technology Home Electronic Systems (HES) application model Part 2: Lighting model for HES |
IEC TS 61000-1-2:2008 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
EN 50090-3-2:2004 | Home and Building Electronic Systems (HBES) - Part 3-2: Aspects of application - User process for HBES Class 1 |
IEC 61000-6-1 : 3.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
ISO/IEC 10192-1:2002 | Information technology Home Electronic System (HES) interfaces Part 1: Universal Interface (UI) Class 1 |
IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
EN 50090-2-3:2005 | Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES |
IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
ISO/IEC 14543-2-1:2006 | Information technology - Home electronic systems (HES) architecture Part 2-1: Introduction and device modularity |
ISO/IEC TR 14763-2:2000 | Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation of copper cabling |
ISO/IEC 14543-3-1:2006 | Information technology Home electronic systems (HES) architecture Part 3-1: Communication layers Application layer for network based control of HES Class 1 |
ISO/IEC 14709-2:1998 | Information technology Configuration of customer premises cabling (CPC) for applications Part 2: Integrated Services Digital Network (ISDN) primary rate |
EN 50090-2-2:1996/A2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
ISO/IEC TR 15067-4:2001 | Information technology Home Electronic System (HES) Application Model Part 4: Security System for HES |
IEC 60948:1988 | Numeric keyboard for home electronic systems (HES) |
IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
ISO/IEC Guide 51:2014 | Safety aspects Guidelines for their inclusion in standards |
ISO/IEC TR 14543-4:2002 | Information technology Home Electronic System (HES) architecture Part 4: Home and building automation in a mixed-use building |
EN 50090-4-1:2004 | Home and Building Electronic Systems (HBES) - Part 4-1: Media independent layers - Application layer for HBES Class 1 |
ISO/IEC 14543-3-3:2007 | Information technology Home electronic system (HES) architecture Part 3-3: User process for network based control of HES Class 1 |
ISO/IEC 18010:2002 | Information technology Pathways and spaces for customer premises cabling |
ISO/IEC 14763-1:1999 | Information technology Implementation and operation of customer premises cabling Part 1: Administration |
ISO/IEC 14543-3-5:2007 | Information technology Home electronic system (HES) architecture Part 3-5: Media and media dependent layers Power line for network based control of HES Class 1 |
EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
EN 41003:2008 | Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
ISO/IEC 18012-1:2004 | Information technology Home Electronic System Guidelines for product interoperability Part 1: Introduction |
IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
IEC 61709:2017 | Electric components - Reliability - Reference conditions for failure rates and stress models for conversion |
ISO/IEC TR 10192-2:2000 | Information technology Home Electronic Systemes (HES) interfaces Part 2: Simple Interfaces Type 1 |
ISO/IEC TR 24746:2005 | Information technology — Generic cabling for customer premises — Mid-span DTE power insertion |
IEC 61709 : 3.0 | ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION |
IEC TR 61000-2-1:1990 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
ISO/IEC TR 24704:2004 | Information technology — Customer premises cabling for wireless access points |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
ISO/IEC TR 15044:2000 | Information technology Terminology for the Home Electronic System (HES) |
ISO/IEC 14543-3-4:2007 | Information technology Home electronic system (HES) architecture Part 3-4: System management Management procedures for network based control of HES Class 1 |
ISO/IEC 14763-3:2014 | Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling |
EN 50090-2-1:1994 | Home and Building Electronic Systems (HBES) - Part 2-1: System overview - Architecture |
ISO/IEC 14543-3-2:2006 | Information technology Home Electronic Systems (HES) Architecture Part 3-2: Communication layers Transport, network and general parts of data link layer for network based control of HES Class 1 |
IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
EN 50090-3-1:1994 | Home and Building Electronic Systems (HBES) - Part 3-1: Aspects of application - Introduction to the application structure |
R205-012 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - TECHNICAL REPORT 12: GUIDELINES ON REQUIREMENTS FOR FUNCTIONAL SAFETY OF PRODUCTS INTENDED TO BE INTEGRATED IN A HOME CONTROL SYSTEM |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.