Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

CSA ISO/IEC 29133:14 (R2019)

Current
Current

The latest, up-to-date edition.

Information technology - Automatic identification and data capture techniques - Quality test specification for rewritable hybrid media data carriers (Adopted ISO/IEC 29133:2010, first edition, 2010-05-15)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Hybrid media functions and process description
6 Conformance tests for the Rewritable Media system
7 Conformance tests for RFID tag component
8 Conformance considerations to integrate the different
  data carrier technologies
Annex A (informative) - Example of Rewritable Hybrid
        Media Data Carrier
Annex B (informative) - In-line quality evaluation
        mechanism
Annex C (informative) - Process control method to estimate
        the end of life
Annex D (informative) - Operational flowcharts
Bibliography

CSA Preface Standards development within the Information Technology sector is harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T). For brevity, this Standard will be referred to as \"CAN/CSA-ISO/IEC 29133\" throughout. At the time of publication, ISO/IEC 29133:14 is available from ISO and IEC in English only. CSA Group will publish the French version when it becomes available from ISO and IEC. This Standard has been formally approved, without modification, by the Technical Committee and has been approved as a National Standard of Canada by the Standards Council of Canada. Scope This International Standard specifies methodologies to be used for the conformance of rewritable hybrid media data carriers, which combine RFID tag technology with linear and/or two-dimensional bar code symbologies that are written to an erasable substrate. Three main product configuration types are addressed within this International Standard: - Rewritable Media, which supports the rewriting of linear or two-dimensional symbols; - Rewritable Hybrid Media, which integrates the Rewritable Media with an RFID tag; - Rewritable Media combined with RFID technology that are physically separate data carriers but still require their data encoding processes to be integrated as part of a Rewritable Hybrid Media system. In particular, this International Standard - defines the base requirements for Rewritable Media and Rewritable Media devices (see 6.2) - defines additional methods for process control of the Rewritable Media over multiple erasure and rewrite cycles (see 6.4) - defines reference standards for evaluating the RFID tag component (see 7.2 and 7.3) - defines additional methods for process control of the RFID component over multiple erasure and rewrite cycles (see 7.4) - provides information to ensure that the data encoded in the bar code symbology and RFID data carrier are synchronous, i.e. are derived from the same source data set (see Clause 8). NOTE Depending on the application, the encoded data can be identical or different (e.g. one data carrier could provide additional data). Because of the interdependency between the Rewritable Hybrid Media and the rewrite device used to create the optical image, the entire Rewritable Hybrid Media system needs to be taken into account to define conformance. Therefore, there is a requirement to define the capability of achieving a given print quality grade as defined in relevant standards. This Rewritable Hybrid Media system approach has the additional advantage of not being prescriptive on the types of media and \"print\" technologies that may be used now or developed in future. As long as a print technology/media combination meets the print quality grades, it can be considered conformant with this International Standard.

CSA Preface Standards development within the Information Technology sector is harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T). For brevity, this Standard will be referred to as \"CAN/CSA-ISO/IEC 29133\" throughout. At the time of publication, ISO/IEC 29133:14 is available from ISO and IEC in English only. CSA Group will publish the French version when it becomes available from ISO and IEC. This Standard has been formally approved, without modification, by the Technical Committee and has been approved as a National Standard of Canada by the Standards Council of Canada. Scope This International Standard specifies methodologies to be used for the conformance of rewritable hybrid media data carriers, which combine RFID tag technology with linear and/or two-dimensional bar code symbologies that are written to an erasable substrate. Three main product configuration types are addressed within this International Standard: - Rewritable Media, which supports the rewriting of linear or two-dimensional symbols; - Rewritable Hybrid Media, which integrates the Rewritable Media with an RFID tag; - Rewritable Media combined with RFID technology that are physically separate data carriers but still require their data encoding processes to be integrated as part of a Rewritable Hybrid Media system. In particular, this International Standard - defines the base requirements for Rewritable Media and Rewritable Media devices (see 6.2) - defines additional methods for process control of the Rewritable Media over multiple erasure and rewrite cycles (see 6.4) - defines reference standards for evaluating the RFID tag component (see 7.2 and 7.3) - defines additional methods for process control of the RFID component over multiple erasure and rewrite cycles (see 7.4) - provides information to ensure that the data encoded in the bar code symbology and RFID data carrier are synchronous, i.e. are derived from the same source data set (see Clause 8). NOTE Depending on the application, the encoded data can be identical or different (e.g. one data carrier could provide additional data). Because of the interdependency between the Rewritable Hybrid Media and the rewrite device used to create the optical image, the entire Rewritable Hybrid Media system needs to be taken into account to define conformance. Therefore, there is a requirement to define the capability of achieving a given print quality grade as defined in relevant standards. This Rewritable Hybrid Media system approach has the additional advantage of not being prescriptive on the types of media and \"print\" technologies that may be used now or developed in future. As long as a print technology/media combination meets the print quality grades, it can be considered conformant with this International Standard.

DocumentType
Standard
ISBN
978-1-77139-475-8
Pages
39
PublisherName
Canadian Standards Association
Status
Current

Standards Relationship
ISO/IEC 29133:2010 Identical

ISO/IEC 15962:2013 Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions
ISO/IEC TR 18047-4:2004 Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz
ISO/IEC 24753:2011 Information technology — Radio frequency identification (RFID) for item management — Application protocol: encoding and processing rules for sensors and batteries
ISO/IEC 19762-3:2008 Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID)
ISO/IEC TR 18047-3:2011 Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz
ISO/IEC 18000-6:2013 Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General
ISO 7724-2:1984 Paints and varnishes Colorimetry Part 2: Colour measurement
ISO/IEC 15416:2016 Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols
ISO 7724-3:1984 Paints and varnishes Colorimetry Part 3: Calculation of colour differences
ISO/IEC 19762-1:2008 Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC
ISO/IEC 18000-2:2009 Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz
ISO/IEC 18000-4:2015 Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz
ISO/IEC 15419:2009 Information technology Automatic identification and data capture techniques Bar code digital imaging and printing performance testing
ISO/IEC 18046-2:2011 Information technology Radio frequency identification device performance test methods Part 2: Test methods for interrogator performance
ISO/IEC 19762-2:2008 Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 2: Optically readable media (ORM)
ISO/IEC 18046-3:2012 Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performance
ISO/IEC TR 18047-6:2011 Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
ISO/IEC 15415:2011 Information technology Automatic identification and data capture techniques Bar code symbol print quality test specification Two-dimensional symbols
ISO/IEC TR 18047-2:2006 Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 kHz
ISO/IEC 18000-3:2010 Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz

View more information
$216.57
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more