DEFSTAN 02-860/1(2010) : 2010
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
12-03-2010
Foreword
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Abbreviations
6 Performance Specification
7 Military Standards/Requirements
Annex A - Normative References
Describes the requirements for the design and manufacture of portable fire extinguishers including discharge hoses, distribution horns, nozzles, connectors, shock support brackets and stowage brackets.
DevelopmentNote |
Supersedes DEFSTAN 02-860(PT1)/1(2003). (06/2010) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (07/2015)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Current
|
Supersedes |
DEFSTAN 02-885(PT1)/1(2015) : 2015 | REQUIREMENTS FOR FIRE PROTECTION OF ELECTRICAL AND ELECTRONIC EQUIPMENT CABINETS ON HM SURFACE SHIPS AND SUBMARINES - PART 1: LOW VOLTAGE AND EXTRA LOW VOLTAGE EQUIPMENT |
BS 381C:1996 | Specification for colours for identification, coding and special purposes |
BS ISO 1382:2012 | Rubber. Vocabulary |
DEFSTAN 00-35(PT4)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 4: NATURAL ENVIRONMENTS |
DEFSTAN 81-41(PT5)/6(2008) : 2008 | PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES |
BS EN 13394:2001 | Packaging. Specification for non-metallic tensional strapping |
BS EN 603-2:1997 | Aluminium and aluminium alloys. Wrought forging stock Mechanical properties |
DEFSTAN 81-41(PT6)/6(2004) : 2004 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKINGS |
DEFSTAN 08-123/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
BS EN 586-2:1994 | Aluminium and aluminium alloys. Forgings Mechanical properties and additional property requirements |
DEFSTAN 00-35(PT5)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 5: INDUCED MECHANICAL ENVIRONMENTS |
DEFSTAN 81-41(PT2)/6(2005) : 2005 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
ISO 2859:1974 | Sampling procedures and tables for inspection by attributes |
DEFSTAN 81-41(PT1)/6(2006) : 2006 | PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
BS EN 604-1:1997 | Aluminium and aluminium alloys. Cast forging stock Technical conditions for inspection and delivery |
DEFSTAN 00-35(PT1)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 1: CONTROL AND MANAGEMENT |
BS 3558-2:2001 | Glossary of rubber terms Additional British terms |
BS EN 10085:2001 | Nitriding steel. Technical delivery conditions |
DEFSTAN 02-723/1(2000) : 2000 | REQUIREMENTS FOR MARKER PLATES |
DEFSTAN 07-204(PT1)/1(2000) : 2000 | THE REQUIREMENT FOR FIRE PROTECTION AND DAMAGE CONTROL FOR SURFACE SHIPS - CATEGORY 2 - PART 1: POLICY FOR SURFACE SHIPS |
DEFSTAN 81-41(PT3)/5(2007) : 2007 | PACKAGING OF DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TESTING |
BS 6001-1(1999) : 1999 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
BS EN 10095:1999 | Heat resisting steels and nickel alloys |
BS EN 573-1:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
BS EN 10250-4:2000 | Open steel die forgings for general engineering purposes Stainless steels |
DEFSTAN 02-745/1(2006) : 2006 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR STEEL CASTINGS |
BS EN 573-2:1995 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
DEFSTAN 05-10(PT2)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 2: DIGITAL PRODUCT DEFINITION INFORMATION |
BS EN 3-6:1996 | Portable fire extinguishers Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5 |
DEFSTAN 05-10(PT1)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 1: HARDCOPY/MICROFORM PRODUCT DEFINITION INFORMATION |
BS EN 3-7 : 2004 | PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS |
BS EN 10087:1999 | Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods |
DEFSTAN 00-35(PT3)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS |
BS EN 3-8:2006 | Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
BS EN 10084:2008 | Case hardening steels. Technical delivery conditions |
DEFSTAN 05-10(PT0)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 0: GENERAL INTRODUCTION TO PRODUCT DEFINITION INFORMATION |
BS EN 586-1:1998 | Aluminium and aluminium alloys. Forgings Technical conditions for inspection and delivery |
DEFSTAN 07-204(PT3)/1(2000) : 2000 | THE REQUIREMENT FOR FIRE PROTECTION AND DAMAGE CONTROL FOR SURFACE SHIPS - CATEGORY 2 - PART 3: SURFACE SHIP AND SUBMARINE EQUIPMENT |
BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
BS EN 603-1:1997 | Aluminium and aluminium alloys. Wrought forging stock Technical conditions for inspection and delivery |
DEFSTAN 05-10(PT3)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 3: PRODUCT DEFINITION INFORMATION GUIDANCE |
BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
BS EN 586-3:2001 | Aluminium and aluminium alloys. Forgings Tolerances on dimensions and form |
DEFSTAN 81-41(PT4)/6(2008) : 2008 | PACKAGING OF DEFENCE MATERIEL - PART 4: DOCUMENTATION |
BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
BS EN ISO 9000:2015 | Quality management systems. Fundamentals and vocabulary |
BS EN 3-9:2006 | Portable fire extinguishers Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers |
BS 6001-5:2002 | Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels |
BS 3558-1:1997 | Glossary of rubber terms International terms |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.