WATER-VAPOUR RESISTANT MATERIAL AND BAGS FOR PACKAGING

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

14-02-2017

Publisher

UK Ministry of Defence Standards

0 Introduction
1 Scope
2 Information to be supplied by the Purchaser
3 Packaging
Annex A - Barrier Material, Aluminium Foil Laminate, Flexible,
Heat Sealable, Water-vapour Resistant
Annex B - Reusable Water Vapour Resistant Bags for Engine
Change Units, Propulsion Units, and Associated Equipment
Annex C - Methods of Tests

Describes the requirements for three types of heat- sealable, flexible, aluminum foil laminates suitable for use in packaging where low water-vapor transmission rates (WVTR) are required.

DevelopmentNote	Supersedes DEFSTAN 81-75/3(2005) & DEFSTAN 81-101/3(2016). (05/2017)
DocumentType	Standard
Pages	32
PublisherName	UK Ministry of Defence Standards
Status	Current
Supersedes	DEFSTAN 81-75/3(2005) : 2005 DEFSTAN 81-101/3(2016) : 2016

BS 381C:1996	Specification for colours for identification, coding and special purposes
BS ISO 9197:2006	Paper and board. Determination of water-soluble chlorides
BS 2782-3:Method 332A:1976	Methods of testing plastics. Mechanical properties Stiffness of plastics film
DEFSTAN 81-41(PT3)/6(2014) : 2014	PACKAGING OF DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TESTING
BS 2782-3:Methods 320A to 320F:1976	Methods of testing plastics. Mechanical properties Tensile strength, elongation and elastic modulus
BS EN 438-2 : 2016	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS 2782-1:Method 140D:1997	Methods of testing plastics. Thermal properties Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
BS 7406:1991	Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods
DEFSTAN 81-41(PT4)/8(2015) : 2015	PACKAGING OF DEFENCE MATERIEL - PART 4: SERVICE PACKAGING INSTRUCTION SHEET (SPIS)
BS ISO 6588-2:2012	Paper, board and pulps. Determination of pH of aqueous extracts Hot extraction
DEFSTAN 91-98/2(2001) : 2001	LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 7.5 CST NATO CODE: O-149 JOINT SERVICE DESIGNATION: OX-38
DEFSTAN 91-90/4(2015) : 2015	GASOLINE AVIATION: GRADES UL91, 100/130 AND 100/130LL JOINT SERVICE DESIGNATION: AVGAS 100 AND AVGAS 100LL
DEFSTAN 81-41(PT6)/9(2015) : 2015	PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING
BS EN ISO 6383-1:2015	Plastics. Film and sheeting. Determination of tear resistance Trouser tear method
BS 3177:1959	Method for determining the permeability to water vapour of flexible sheet materials used for packaging
BS EN ISO 186:2002	Paper and board. Sampling to determine average quality
DEFSTAN 68-10/5(2003) : 2003	CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24
BS 2782-5:Method 540G:1995	Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. Open flame carbon-arc lamps
DEFSTAN 01-5/18(2016) : 2016	FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS
BS EN ISO 1924-2:2008	Paper and board. Determination of tensile properties Constant rate of elongation method (20 mm/min)
DEFSTAN 81-041(PT2)/9(2017) : 2017	PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN
BS EN ISO 4892-1:2016	Plastics. Methods of exposure to laboratory light sources General guidance
BS EN 20187:1993	Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
DEFSTAN 81-132/2(2004) : 2004	PAPER, HUMIDITY INDICATOR, COBALT CHLORIDE
BS ISO 9198:2001	Paper, board and pulp. Determination of water-soluble sulfates
BS 903-1:1995	Physical testing of rubber Guide to the selection and use of methods of test for rubber
BS EN ISO 176:2005	Plastics. Determination of loss of plasticizers. Activated carbon method
DEFSTAN 81-041(PT5)/8(2017) : 2017	PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES
BS EN ISO 4674-1:2016	Rubber- or plastics-coated fabrics. Determination of tear resistance Constant rate of tear methods
DEFSTAN 91-100/3(2001) : 2001	LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5CST NATO CODE: O-160 JOINT SERVICE DESIGNATION: OX-26
DEFSTAN 91-87/6(2009) : 2009	TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII
BS 2782-1:Method 150B:1976	Methods of testing plastics. Thermal properties Determination of cold flex temperature of flexible polyvinyl compound
BS 2782-8:Method 820A:1996	Methods of testing plastics. Other properties Determination of water vapour transmission rate (dish method)
BS 2739:1975	Specification for thick PVC sheeting (calendered, flexible, unsupported)
BS EN 14469-4:2004	Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Determination of bleeding of colouring materials
SAE J 1899 : 2011	LUBRICATING OIL, AIRCRAFT PISTON ENGINE (ASHLESS DISPERSANT)
DEFSTAN 91-48/2(1997) : 1997	HYDRAULIC FLUID, PETROLEUM: SUPERCLEAN NATO CODE: H-515 JOINT SERVICE DESIGNATION: OM-15 HYDRAULIC FLUID, PETROLEUM: NORMAL NATO CODE: H-520 JOINT SERVICE DESIGNATION: OM-18
DEFSTAN 91-94/2(2001) : 2001	LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 3 CST JOINT SERVICE DESIGNATION: OX-7
DEFSTAN 91-4/9(2013) : 2013	FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION DIESO F-76
DEFSTAN 81-041(PT1)/9(2016) : 2016	PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS
BS 2782-1:Method 150C:1983	Methods of testing plastics. Thermal properties Determination of low temperature extensibility of flexible polyvinyl chloride sheet
DEFSTAN 91-101/3(2001) : 2001 AMD 1 2002	LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST NATO CODE: O-156 JOINT SERVICE DESIGNATION: OX-27 AND OX-28