DIN 18195-2:2009-04
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WATER-PROOFING OF BUILDINGS - PART 2: MATERIALS
Available format(s)
Hardcopy , PDF
Superseded date
01-07-2017
Language(s)
German
Published date
01-01-2009
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Abdichtungsstoffe
5 Hilfsstoffe
5.1 Stoffe für Voranstriche, Grundierungen,
Versiegelungen und Kratzspachtelungen
5.2 Stoffe für Trennschichten bzw. Trennlagen
5.3 Stoffe für Schutzlagen und Schutzschichten
5.4 Stoffe zum Verfüllen von Fugen in Schutzschichten
Literaturhinweise
This standard is included in DIN Handbook 73, 110 and 129.
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
|
| Supersedes |
| DIN HDBK 73 : 14ED 2016 | ESTRICHARBEITEN, GUSSASPHALTARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18353, ATV DIN 18354 |
| DIN HDBK 129 : 12ED 2015 | |
| DIN EN 1996-2/NA:2012-01 | NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY |
| DIN 18195-4:2011-12 | WATER-PROOFING OF BUILDINGS - PART 4: WATERPROOFING AGAINST GROUND MOISTURE (CAPILLARY WATER, RETAINED WATER) AND NON-ACCUMULATING SEEPAGE WATER UNDER FLOOR SLABS ON WALLS, DESIGN AND EXECUTION |
| DIN HDBK 110 : 12ED 2016 | |
| DIN 18195-10:2011-12 | WATER-PROOFING OF BUILDINGS - PART 10: PROTECTIVE LAYERS AND PROTECTIVE MEASURES |
| DIN 18195-6:2011-12 | WATER-PROOFING OF BUILDINGS - PART 6: WATER-PROOFING AGAINST OUTSIDE PRESSING WATER AND ACCUMULATING SEEPAGE WATER, DESIGN AND EXECUTION |
| DIN 18336:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - WATERPROOFING |
| DIN 18195-6:1983-08 | WATERPROOFING OF BUILDINGS AND STRUCTURES - WATERPROOFING AGAINST WATER THAT EXERTS HYDROSTATIC PRESSURE FROM THE OUTSIDE - DESIGN AND WORKMANSHIP |
| DIN 18195-4:1983-08 | WATERPROOFING OF BUILDINGS AND STRUCTURES - DAMP-PROOFING AGAINST MOISTURE FROM THE GROUND - DESIGN AND WORKMANSHIP |
| DIN 18195-1:1983-08 | WATERPROOFING OF BUILDINGS AND STRUCTURES - GENERAL, TERMINOLOGY |
| DIN 18195-8:1983-08 | WATERPROOFING OF BUILDINGS AND STRUCTURES - WATERPROOFING OVER MOVEMENT JOINTS |
| DIN 18195-9:1986-12 | WATERPROOFING OF BUILDINGS AND STRUCTURES - PENETRATIONS, TRANSITIONS, CLOSURES |
| DIN 18195-3:1983-08 | WATERPROOFING OF BUILDINGS AND STRUCTURES - PROCESSING OF MATERIALS |
| DIN 18195-5:1984-02 | WATERPROOFING OF BUILDINGS AND STRUCTURES - WATERPROOFING AGAINST WATER THAT EXERTS NO HYDROSTATIC PRESSURE - DESIGN AND WORKMANSHIP |
| DIN 18195-7:1989-06 | WATERPROOFING OF BUILDINGS AND STRUCTURES - WATERPROOFING SHEETING SUBJECTED TO HYDROSTATIC PRESSURE FROM THE INSIDE - DESIGN AND WORKMANSHIP |
| VDI/BV-BS 6000 Blatt 1.1:2012-02 | Provision and installation of sanitary facilities - Generic aspects and systems; Prefabricated sanitary modules (prefabricated sanitary rooms, installation systems) |
| DIN 18195-1:2011-12 | WATERPROOFING OF BUILDINGS - PART 1: PRINCIPLES, DEFINITIONS, ATTRIBUTION OF WATERPROOFING TYPES |
| KTA 2501 : 2015(R2017) | STRUCTURAL WATERPROOFING OF NUCLEAR POWER PLANTS |
| DIN 18195-5:2011-12 | WATER-PROOFING OF BUILDINGS - PART 5: WATER-PROOFING AGAINST NON-PRESSING WATER ON FLOORS AND IN WET AREAS, DESIGN AND EXECUTION |
| DIN EN 1996-1-1/NA:2012-01 | NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| DIN 18195-9:2010-05 | WATER-PROOFING OF BUILDINGS - PART 9: PENETRATIONS, TRANSITIONS, CONNECTIONS AND ENDINGS |
| DIN 18354:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - ASPHALT FLOORING WORKS |
| DIN 1988-7:2004-12 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 7: PREVENTION OF CORROSION DAMAGE AND CALCAREOUS DEPOSIT FORMATION - DVGW CODE OF PRACTICE |
| DIN 18195-8:2011-12 | WATER-PROOFING OF BUILDINGS - PART 8: WATER-PROOFING OVER JOINTS FOR MOVEMENTS |
| DIN HDBK 310 : 2ED 2001 | BAUPHYSIK 2 - NORMEN FUER DAS STUDIUM - FEUCHTESCHUTZ, LUEFTUNG, WAERMEBEDARFSERMITTLUNG, WAERMESCHUTZ |
| DIN 18195-10:1983-08 | WATERPROOFING OF BUILDINGS AND STRUCTURES - PROTECTIVE LAYERS AND PROTECTIVE MEASURES |
| DIN 18195-3:2011-12 | WATER-PROOFING OF BUILDINGS - PART 3: REQUIREMENTS OF THE GROUND AND WORKING PROPERTIES OF MATERIALS |
| DIN EN 12697-2:2015-07 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| DIN 18195-7:2009-07 | WATER-PROOFING OF BUILDINGS - PART 7: WATER-PROOFING AGAINST PRESSING WATER FROM THE INSIDE, DIMENSIONING AND EXECUTION |
| DIN 18195-10:2011-12 | WATER-PROOFING OF BUILDINGS - PART 10: PROTECTIVE LAYERS AND PROTECTIVE MEASURES |
| DIN 52129:2014-11 | UNCOATED BITUMEN SATURATED SHEETING - DEFINITION, DESIGNATION, REQUIREMENTS |
| DIN EN 13967:2012-07 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| DIN 18195-9:2010-05 | WATER-PROOFING OF BUILDINGS - PART 9: PENETRATIONS, TRANSITIONS, CONNECTIONS AND ENDINGS |
| DIN EN 13969:2007-03 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN DAMP PROOF SHEETS INCLUDING BITUMEN BASEMENT TANKING SHEETS - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 998-1:2015-11 (Draft) | SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| DIN 18195-4:2011-12 | WATER-PROOFING OF BUILDINGS - PART 4: WATERPROOFING AGAINST GROUND MOISTURE (CAPILLARY WATER, RETAINED WATER) AND NON-ACCUMULATING SEEPAGE WATER UNDER FLOOR SLABS ON WALLS, DESIGN AND EXECUTION |
| DIN EN 13305:2009-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF HARD INDUSTRIAL BITUMENS |
| DIN 18195-1:2011-12 | WATERPROOFING OF BUILDINGS - PART 1: PRINCIPLES, DEFINITIONS, ATTRIBUTION OF WATERPROOFING TYPES |
| DIN EN ISO 2431:2012-03 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| DIN EN 13108-20:2013-06 (Draft) | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| DIN V 20000-202:2007-12 | USE OF BUILDING PRODUCTS IN CONSTRUCTION WORKS - PART 202: ADAPTION STANDARD FOR FLEXIBLE SHEETS FOR WATERPROOFING ACCORDING TO EUROPEAN STANDARDS FOR THE USE AS WATERPROOFING |
| DIN EN 12597:2014-08 | BITUMEN AND BITUMINOUS BINDERS - TERMINOLOGY |
| DIN 18531-1:2016-06 (Draft) | WATERPROOFING OF ROOFS, BALCONIES AND WALKWAYS - PART 1: NON-UTILIZED AND UTILIZED ROOFS - REQUIREMENTS AND PRINCIPLES FOR EXECUTION AND DESIGN |
| DIN 18195-5:2011-12 | WATER-PROOFING OF BUILDINGS - PART 5: WATER-PROOFING AGAINST NON-PRESSING WATER ON FLOORS AND IN WET AREAS, DESIGN AND EXECUTION |
| DIN 52141:1980-12 | GLASS FIBRE FLEECE AS LAYER FOR ROOF AND WATER-PROOF SHEETING; DEFINITION, DESIGNATION, REQUIREMENTS |
| DIN V 52144:1995-09 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN AND POLYMERBITUMEN SHEETING - MANUFACTURER'S INTERNAL CONTROL |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| DIN 18195-6:2011-12 | WATER-PROOFING OF BUILDINGS - PART 6: WATER-PROOFING AGAINST OUTSIDE PRESSING WATER AND ACCUMULATING SEEPAGE WATER, DESIGN AND EXECUTION |
| DIN EN 1976:2013-01 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
| DIN EN 14909:2012-07 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| DIN 18195-8:2011-12 | WATER-PROOFING OF BUILDINGS - PART 8: WATER-PROOFING OVER JOINTS FOR MOVEMENTS |
| DIN EN 1427:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| DIN 7724:1993-04 | POLYMERIC MATERIALS; GROUPING OF POLYMERIC MATERIALS BASED ON THEIR MECHANICAL BEHAVIOUR |
| DIN EN 13707:2013-12 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 14967:2006-08 | Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics |
$130.64
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.