DIN 1986-3:2004-11
Current
Current
The latest, up-to-date edition.
DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 3: SPECIFICATIONS FOR SERVICE AND MAINTENANCE
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-01-2004
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Grundsätze
4.1 Allgemeines
4.2 Anforderungen
5 Benutzung der Entwässerungsanlage
5.1 Allgemeines
5.2 Zulässige Benutzung
5.2.1 Allgemeines
5.2.2 Häusliches Abwasser (nach DIN EN 12056-1)
5.2.3 Regenwasser (nach DIN EN 12056-1)
5.2.4 Industrielles Abwasser (nach DIN EN 12056-1)
5.3 Unzulässige Benutzung
5.3.1 Schädliche Stoffe
5.3.2 Schädliche Stoffe geringer Menge und
Konzentration
5.3.3 Grundwasser
5.4 Ableitung von Schmutzwasser und Regenwasser
5.5 Rückhalten und Behandeln schädlicher Stoffe
5.6 Einleiten in die öffentliche Abwasseranlage
5.6.1 Allgemeines
5.6.2 Abwassertemperatur
5.6.3 Kühlwasser
5.6.4 Wasser aus Dränageleitungen
5.7 Einleiten in Kläranlagen auf Grundstücken
5.8 Einleiten in Abwassersammelgruben auf Grundstücken
5.9 Unbeabsichtigte Einleitung schädlicher Stoffe
6 Betrieb
7 Inspektion und Wartung
7.1 Allgemeines
7.2 Anforderungen
7.3 Zugänglichkeit von Anlagenteilen
8 Gefahren bei Arbeiten an Entwässerungsanlagen
9 Wartungsvertrag
Anhang A (informativ) Beispiele für Wartungs- und
Inspektionsmassnahmen für weitere Anlagenteile
Anhang B (informativ) Muster für ein Inbetriebnahme- und
Einweisungsprotokoll einer Entwässerungsanlage
Literaturhinweise
This standard is included in DIN Handbook 13-1. Applicable to the operation and maintenance of drainage and sewerage systems for buildings and plots of land in accordance with DIN 1986 Part 1, Part 2 and Part 4.
| DevelopmentNote |
Supersedes DIN 1986-32, DIN 1986-32 E, DIN 1986-33 and DIN 1986-33 E. Applies in conjunction with DIN 1986-30. (11/2004)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| DIN 4040-1:1989-03 | GREASE INTERCEPTOR SYSTEMS; CONCEPTS, NOMINAL SIZES, REQUIREMENTS AND TESTING |
| DIN 4261-4:1984-06 | SMALL SEWAGE TREATMENT PLANTS, PLANTS WITH AERATION, SERVICE AND MAINTENANCE |
| DIN 4040-2:1989-03 | GREASE SEPARATORS - DIMENSIONING, INSTALLATION AND OPERATION |
| DIN EN 12109:1999-06 | VACUUM DRAINAGE SYSTEMS INSIDE BUILDINGS |
| DIN 1389-2:1979-10 | CONNECTORS FOR WATER CLOSETS - PRINCIPLES OF CONSTRUCTION AND TESTING |
| VDI 3810 Blatt 2:2010-05 | Operation and maintenance of building installations - Sanitary systems |
| VDI 6000 Blatt 2:2007-11 | Provision and installation of sanitary facilities - Workplaces and work stations |
| VDI 2050 Blatt 2:2011-11 | Requirements for mechanical equipment rooms - Sanitary engineering |
| DIN HDBK 13-1 : 16ED 2018 | ABWASSERTECHNIK 1 - GEBAEUDE- UND GRUNDSTUECKSENTWAESSERUNG - ENTWAESSERUNGSGEGENSTAENDE |
| DIN HDBK 13 : 14ED 2004 | WASTE WATER ENGINEERING 1. STANDARDS FOR SITE DRAINAGE |
| DIN 4030-1:2008-06 | ASSESSMENT OF WATER, SOIL AND GASES FOR THEIR AGGRESSIVENESS TO CONCRETE - PART 1: PRINCIPLES AND LIMITING VALUES |
| DIN 1986-32:1986-06 | SITE DRAINAGE SYSTEMS - BACKFLOW GATES FOR NON-FAECAL SEWAGE - INSPECTION AND MAINTENANCE |
| DIN 1986-4:2019-08 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 4: FIELDS OF APPLICATION OF SEWAGE PIPES AND FITTINGS OF DIFFERENT MATERIALS |
| DIN 2880:1999-01 | Application of cement mortar lining for cast iron pipes, steel pipes and fittings |
| DIN 1986-31:1986-06 | SEWAGE SYSTEMS ON PRIVATE GROUND - SEWAGE LIFTING FACILITIES - CHECKING AND MAINTENANCE |
| DIN 1986-100:2016-12 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 100: SPECIFICATIONS IN RELATION TO DIN EN 752 AND DIN EN 12056 |
| DIN 1999-1:1976-08 | SEPARATORS FOR LIGHT LIQUIDS, PETROL-SEPARATORS, FUEL OIL SEPARATORS - PRINCIPLES OF CONSTRUCTION |
| DIN 1988-6:2002-05 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 6: FIRE FIGHTING AND FIRE PROTECTION INSTALLATIONS - DVGW CODE OF PRACTICE |
| DIN 1986-33:1987-10 | SITE DRAINAGE SYSTEMS - BACKFLOW GATES FOR FAECAL SEWAGE - INSPECTION AND MAINTENANCE |
| DIN 1390-2:1979-10 | URINALS, WALL MOUNTED - PRINCIPLES FOR CONSTRUCTION AND FOR TESTING |
| DIN 19537-2:1988-01 | PIPES AND FITTINGS OF HIGH DENSITY POLYETHYLENE (PE-HD) FOR DRAINAGE AND SEWERAGE - TECHNICAL SPECIFICATIONS FOR DELIVERY |
| DIN 1986-4:2011-12 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 4: FIELDS OF APPLICATION OF SEWAGE PIPES AND FITTINGS OF DIFFERENT MATERIALS |
| EN 274-1:2002 | Waste fittings for sanitary appliances - Part 1: Requirements |
| DIN EN 1253-2:2015-03 | GULLIES FOR BUILDINGS - PART 2: ROOF DRAINS AND FLOOR GULLIES WITHOUT TRAP |
| DIN EN 12566-1:2016-12 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 1: PREFABRICATED SEPTIC TANKS |
| BGV C 5 : 1997 | |
| DIN EN 1253-4:2016-07 | GULLIES FOR BUILDINGS - PART 4: ACCESS COVERS |
| BGV A 8 : 2002 | |
| DWA-M 115-2 : 2013 | INDIREKTEINLEITUNGEN NICHT HAEUSLICHEN ABWASSERS - TEIL 2: ANFORDERUNGEN |
| EN 12566-1:2016 | Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks |
| DIN 1986-30:2012-02 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 30: MAINTENANCE |
| DWA-A 251 : 2011 | Condensates from condensing boilers |
| DIN EN 752-4:1997-11 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 4: HYDRAULIC DESIGN AND ENVIRONMENTAL CONSIDERATIONS |
| EN 752-3 : 1996 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 3: PLANNING |
| DIN EN 752-2:1996-09 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 2: PERFORMANCE REQUIREMENTS |
| DIN EN 12056-4:2001-01 | GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS - PART 4: WASTEWATER LIFTING PLANTS - LAYOUT AND CALCULATION |
| DWA-M 115-1 : 2013 | INDIREKTEINLEITUNGEN NICHT HAEUSLICHEN ABWASSERS - TEIL 1: RECHTSGRUNDLAGEN |
| EN 12056-2:2000 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
| EN 13564-1:2002 | Anti-flooding devices for buildings - Part 1: Requirements |
| EN 1253-4:2016 | Gullies for buildings - Part 4: Access covers |
| EN 12056-4:2000 | Gravity drainage systems inside buildings - Part 4: Wastewater lifting plants - Layout and calculation |
| DIN EN 12056-2:2001-01 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; German version EN 12056-2:2000 |
| DIN EN 752-7:1998-06 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 7: MAINTENANCE AND OPERATIONS |
| DIN EN 752-6:1998-06 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 6: PUMPING INSTALLATIONS |
| EN 752-6 : 1998 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING INSTALLATIONS |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| DIN EN 476:2011-04 | General requirements for components used in drains and sewers |
| EN 12056-1:2000 | Gravity drainage systems inside buildings - Part 1: General and performance requirements |
| DIN 1989-1:2002-04 | Rainwater harvesting systems - Part 1: Planning, installation, operation and maintenance |
| DIN EN 752-3:1996-09 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 3: PLANNING |
| DIN V 4034-1:2004-08 | PREFABRICATED CONCRETE MANHOLES, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - PART 1: REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
| DIN 31051:2012-09 | FUNDAMENTALS OF MAINTENANCE |
| DIN 4261-1:2010-10 | Small sewage treatment plants - Part 1: Plants for waste water pretreatment |
| DIN EN 12056-1:2001-01 | Gravity drainage systems inside buildings - Part 1: General and performance requirements; German version EN 12056-1:2000 |
| EN 13564-2:2002 | Anti-flooding devices for buildings - Part 2: Test methods |
| DIN EN 752-1:1996-01 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - GENERALITIES AND DEFINITIONS |
| EN 1917:2002/AC:2008 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 1253-1:2015-03 | GULLIES FOR BUILDINGS - PART 1: TRAPPED FLOOR GULLIES WITH A DEPTH WATER SEAL OF AT LEAST 50 MM |
| EN 1253-2:2015 | GULLIES FOR BUILDINGS - PART 2: ROOF DRAINS AND FLOOR GULLIES WITHOUT TRAP |
| EN 752-5 : 1997 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - REHABILITATION |
| DIN EN 12056-3:2001-01 | Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation; German version EN 12056-3:2000 |
| EN 476:2011 | General requirements for components used in drains and sewers |
| DWA-A 138 : 2005 COR 2006 | PLANNING, CONSTRUCTION AND OPERATION OF FACILITIES FOR THE PERCOLATION OF PRECIPITATION WATER |
| DIN 4261-4:1984-06 | SMALL SEWAGE TREATMENT PLANTS, PLANTS WITH AERATION, SERVICE AND MAINTENANCE |
| DIN 4045:2015-08 (Draft) | WASTEWATER ENGINEERING - VOCABULARY |
| DIN 1999-100:2003-10 | INSTALLATIONS FOR SEPARATION OF LIGHT LIQUIDS - PART 100: APPLICATION PROVISIONS FOR INSTALLATIONS FOR SEPARATION OF LIGHT LIQUIDS IN ACCORDANCE WITH DIN EN 858-1 AND DIN EN 858-2 |
| DIN 4261-2:1984-06 | SMALL SEWAGE TREATMENT PLANTS; PLANTS WITH SEWAGE AERATION; APPLICATION, DESIGN, CONSTRUCTION AND TESTING |
| DIN EN 12056-5:2001-01 | GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS - PART 5: INSTALLATION AND TESTING, INSTRUCTIONS FOR OPERATION, MAINTENANCE AND USER |
| EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| EN 274-3:2002 | Waste fittings for sanitary appliances - Part 3: Quality control |
| EN 274-2:2002 | Waste fittings for sanitary appliances - Part 2: Test methods |
| EN 752-4 : 1997 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 4: HYDRAULIC DESIGN AND ENVIRONMENTAL CONSIDERATIONS |
| EN 1253-3:2016 | Gullies for buildings - Part 3: Evaluation of conformity |
| ATV A 122 : 1991 | PRINCIPLES FOR DIMENSIONING, CONSTRUCTION AND OPERATION OF SMALL SEWAGE TREATMENT PLANTS WITH AEROBIC BIOLOGICAL PURIFICATION STAGE FOR CONNECTION VALUES BETWEEN 50 AND 500 TOTAL NUMBER OF INHABITANTS AND POPULATION EQUIVALENTS |
| EN 1610:2015 | Construction and testing of drains and sewers |
| DIN EN 13306:2015-09 (Draft) | MAINTENANCE - MAINTENANCE TERMINOLOGY |
| ATV-DVWK-M 115-3 : 2004 | INDIREKTEINLEITUNGEN NICHT HAEUSLICHEN ABWASSERS - TEIL 3: PRAXIS DER INDIREKTEINLEITERUEBERWACHUNG |
| BGR 177 : 2006 | SAFETY RULES FOR STEP IRONS AND MANHOLE STEPS |
| DIN EN 13564-1:2002-10 | ANTI-FLOODING DEVICES FOR BUILDINGS - PART 1: REQUIREMENTS |
| EN 12056-3:2000 | Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
| DIN EN 1253-3:2016-09 | GULLIES FOR BUILDINGS - PART 3: EVALUATION OF CONFORMITY |
| DIN EN 1253-5:2015-09 (Draft) | GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE |
| DIN 4040-100:2004-12 | GREASE SEPARATORS - PART 100: APPLICATION PROVISIONS FOR GREASE SEPARATORS IN ACCORDANCE WITH DIN EN 1825-1 AND DIN EN 1825-2 |
| EN 1253-5:2017 | Gullies for buildings - Part 5: Gullies with light liquids closure |
| EN 1253-1:2015 | GULLIES FOR BUILDINGS - PART 1: TRAPPED FLOOR GULLIES WITH A DEPTH WATER SEAL OF AT LEAST 50 MM |
| DIN EN 1917:2003-04 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 752-5:1997-11 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 5: REHABILITATION |
| EN 752-7 : 1998 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - MAINTENANCE AND OPERATIONS |
| DIN 1986-100:2016-12 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 100: SPECIFICATIONS IN RELATION TO DIN EN 752 AND DIN EN 12056 |
| EN 12056-5:2000 | Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and use |
| DIN EN 1717:2011-08 | Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow |
| BGV A 1 : 2008 | |
| DIN EN 13564-2:2003-02 | ANTI-FLOODING DEVICES FOR BUILDINGS - PART 2: TEST METHODS |
$153.95
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.