DIN EN 10253-4:2008-06
Current
The latest, up-to-date edition.
Hardcopy , PDF
01-06-2008
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole
5 Sorteneinteilung und Bezeichnung
6 Bestellangaben
7 Festigkeit gegen Innendruck
8 Herstellungsverfahren
9 Technische Anforderungen
10 Äusseres Erscheinungsbild und innere Beschaffenheit
11 Masse und Grenzabmasse
12 Prüfung
13 Probenahme
14 Prüfverfahren
15 Kennzeichnung
16 Vorbereitung zum Versand und Verpackung
Anhang A (normativ) Baumasse der Formstücke
Anhang B (normativ) Bestimmung des Ausnutzungsgrades
und der Wanddicke
Anhang C (normativ) Tabellen für den Ausnutzungsgrad für
Formstücke der Bauart A
Anhang D (informativ) Wanddicken für Formstücke der
Bauart B
Anhang ZA (informativ)
Literaturhinweise
This standard is included in DIN Handbook 62-1, 384 and 384/1.
Committee |
ECISS/TC 29
|
DevelopmentNote |
Supersedes DIN 2605-1, DIN 2605-2, DIN 2609, DIN 2615-1, DIN 2615-2, DIN 2616-1, DIN 2616-2 and DIN 2617. (06/2008) DRAFT 2017 issued in November 2017. (11/2017)
|
DocumentType |
Standard
|
Pages |
110
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NEN EN 10253-4 : 2008 C1 2009 | Identical |
NF EN 10253-4 : 2009 | Identical |
EN 10253-4:2008/AC:2009 | Identical |
BS EN 10253-4:2008 | Identical |
DIN 2827:2006-07 | HOSE ASSEMBLIES OF STAINLESS STEEL FOR CHEMICAL PRODUCTS |
DIN 21057-11:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 11: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF AUSTENITIC STAINLESS STEELS OF MATERIAL GROUP 8.1 |
DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
DIN HDBK 62-1 : 8ED 2010 | WASSERVERSORGUNG 2 - GUSS-, STAHLBETON- UND STAHLROHRE FUER WASSERLEITUNGEN |
DIN 21057-12:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 12: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF NON ALLOYED AND ALLOYED STEEL WITH SPECIFIED PROPERTIES AT ELEVATED TEMPERATURES OF MATERIAL GROUP 1.2 AND 5.1 |
KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
KTA 3201.2 : 2013 | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 2: DESIGN AND ANALYSIS |
DIN 28011:2012-06 | TOROSPHERICAL HEADS |
DIN HDBK 384/1 : 2ED 2010 | ROHRVERLEGERICHTLINIE - BAUTEILE, FLANSCHE, FORMSTUECKE, AUSRUESTUNGSTEILE |
DIN 19643-1:2012-11 | Treatment of water of swimming pools and baths - Part 1: General requirements |
KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
DIN HDBK 384 : 3ED 2015 | VERLEGERRICHTLINIE FUER ROHRLEITUNGEN IM CHEMISCHEN UND PHARMAZEUTISCHEN ANLAGENBAU |
DIN 28013:2012-06 | ELLIPSOIDAL HEADS |
EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
EN ISO 8493 : 2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
EN 10079:2007 | Definition of steel products |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
EN 10002-5:1991 | Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
EN 10168:2004 | Steel products - Inspection documents - List of information and description |
EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
EN 10272:2016 | Stainless steel bars for pressure purposes |
EN 10021:2006 | General technical delivery conditions for steel products |
ISO 5251:1981 | Stainless steel butt-welding fittings |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ISO 3419:1981 | Non-alloy and alloy steel butt-welding fittings |
ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
EN 10020:2000 | Definition and classification of grades of steel |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.