DIN EN 1090-5:2017-07
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
Hardcopy , PDF
30-06-2020
01-01-2017
National foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Specifications and documentation
5 Constituent products
6 Manufacturing
7 Welding at the construction site
8 Mechanical Fastening
9 Erection
10 Surface protection
11 Geometrical tolerances
12 Inspection, testing and correction
Annex A (normative) - Basic requirements for profiled
sheeting
Annex B (normative) - Additional design requirements
for profiled sheeting
Annex C (informative) - Documentation
Annex D (normative) - Geometrical tolerances
Annex E (normative) - Galvanic corrosion
Annex F (normative) - Additional information
Bibliography
Defines requirements for the execution i.e. the manufacture and the installation of cold-formed structural aluminium components made from profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading conditions or seismic loading conditions and their documentation.
DevelopmentNote |
Supersedes DIN 18807-9 E. (07/2017)
|
DocumentType |
Standard
|
Pages |
63
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 1090-5:2017 | Identical |
EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
EN ISO 376:2011 | Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011) |
EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
PREN 1090-4 : DRAFT 2014 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
ISO 4042:1999 | Fasteners Electroplated coatings |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN 1991-1-6:2005/AC:2013 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution |
EN ISO 4042:1999 | FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999) |
EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
EN 1991-1-7:2006/A1:2014 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS |
ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
EN 1993-1-5:2006/A1:2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS |
EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
ISO 2808:2007 | Paints and varnishes Determination of film thickness |
EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
EN 1999-1-1:2007/A2:2013 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
EN 1991-1-3:2003/A1:2015 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
EN 1999-1-4:2007/A1:2011 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
EN 12056-1:2000 | Gravity drainage systems inside buildings - Part 1: General and performance requirements |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
EN ISO 17872:2007 | Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007) |
ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
EN 1991-1-2:2002/AC:2013 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
ISO 17872:2007 | Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
EN 1991-1-5:2003/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS |
EN 1993-1-4:2006/A1:2015 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN 10143:2006 (edition 2) | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
ISO 376:2011 | Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines |
EN 1991-1-1:2002/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
CEN/TS 1187:2012 | Test methods for external fire exposure to roofs |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
EN 1993-1-3:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
EN 1999-1-2:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
EN 12056-3:2000 | Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
EN 1998-1:2004/A1:2013 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS |
EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN 1991-1-4:2005/A1:2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
EN 1993-1-1:2005/A1:2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.