DIN EN 14198:2017-03
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
Available format(s)
Hardcopy , PDF
Superseded date
07-03-2021
Language(s)
English
Published date
01-01-2017
National foreword
European foreword
1 Scope
2 Normative References
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements
6 Performances
Annex A (normative) - Vehicle requirements
Annex B (informative) - Train related brake performance categories
Annex C (informative) - Explanation of 'proven design' concept
Annex D (informative) - Corresponding standards EN - UIC
Annex E (normative) - Brake pipe pressure control system
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU Directive
2008/57/EC
Bibliography
Defines basic requirements for the braking of trains hauled by locomotives: - For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system. - For trains hauled by locomotives and intended for use in fixed or predefined formation, the requirements on the vehicle and the train are necessary.
| DocumentType |
Standard
|
| Pages |
81
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| NF EN 14198 : 2017 | Identical |
| SN EN 14198:2017 | Identical |
| NS EN 14198 : 2004 | Identical |
| I.S. EN 14198:2016 | Identical |
| NBN EN 14198 : 2005 | Identical |
| EN 14198:2016 | Identical |
| UNI EN 14198 : 2005 | Identical |
| BS EN 14198 : 2016 | Identical |
| UNE-EN 14198:2005 | Identical |
| NEN EN 14198 : 2016 | Identical |
| ONORM EN 14198 : 2017 | Identical |
| EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN 15595:2009+A1:2011 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| EN 15611:2008+A1:2010 | Railway applications - Braking - Relay valves |
| EN 14531-1:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
| EN 15612:2008+A1:2010 | Railway applications - Braking - Brake pipe accelerator valve |
| EN 15624:2008+A1:2010 | Railway applications - Braking - Empty-loaded changeover devices |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UIC 541-5 : 4ED 2005 | BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) - ELECTROPNEUMATIC EMERGENCY BRAKE OVERRIDE (EBO) |
| NFF 11 100 : 1995 | RAILWAY ROLLING STOCK - QUALITY OF COMPRESSED AIR FOR PNEUMATIC APPARATUSES AND CIRCUITS USE |
| EN 16185-2:2014 | Railway applications - Braking systems of multiple unit trains - Part 2: Test methods |
| EN 15877-1:2012 | Railway applications - Marking on railway vehicles - Part 1: Freight wagons |
| EN 15734-1:2010/AC:2013 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| EN 14535-2:2011 | Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
| EN 286-3:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 15877-2:2013 | Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
| EN 15220:2016 (edition 2) | Railway applications - Brake indicators |
| UIC 541-4 : 4ED 2010 | BRAKES - BRAKES WITH COMPOSITION BRAKE BLOCKS - GENERAL CONDITIONS FOR CERTIFICATION OF COMPOSITE BRAKE BLOCKS |
| EN 14535-1:2005+A1:2011 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS |
| UIC 547 : 4ED 1989 | BRAKES - AIR BRAKE - STANDARD PROGRAMME OF TESTS |
| UIC 541-3 : 8ED 2017 | BRAKES - DISC BRAKES AND THEIR APPLICATION - GENERAL CONDITIONS FOR THE APPROVAL OF BRAKE PADS |
| EN 15329:2015 | Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles |
| EN 15273-2:2013+A1:2016 | Railway applications - Gauges - Part 2: Rolling stock gauge |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EN 50553 : 2012 AMD 1 2016 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| UIC 541-07 : 1ED 1992 | BRAKES - REGULATIONS GOVERNING THE CONSTRUCTION OF DIFFERENT TYPES OF BRAKING GEAR - SIMPLE PRESSURE RECEPTACLES OF STEEL, NOT FIRED, FOR AIR BRAKING EQUIPMENT AND AUXILIARY PNEUMATIC EQUIPMENT FOR RAILWAY ROLLING STOCK |
| ISO 8573-1:2010 | Compressed air Part 1: Contaminants and purity classes |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| PREN 16834 : DRAFT 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PERFORMANCE |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| EN 14531-2:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles |
| EN 16452:2015 | Railway applications - Braking - Brake blocks |
| EN 14601:2005+A1:2010 | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
| EN 286-4:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| UIC 541-6 : 1ED 2010 | BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) AND PASSENGER ALARM SIGNAL (PAS) FOR VEHICLES USED IN HAULED CONSISTS |
| UIC 541-03 : 2ED 2015 | BRAKES - SPECIFICATIONS FOR THE CONSTRUCTION OF VARIOUS BRAKE PARTS - DRIVER'S BRAKE VALVE / DRIVER'S BRAKE CONTROLLER |
| UIC 545 : 10ED 2014 | BRAKES - INSCRIPTIONS, MARKS AND SIGNS |
| UIC 541-04 : 4ED 2014 | BRAKES - REGULATIONS CONCERNING THE MANUFACTURE OF BRAKE COMPONENTS - SELF-ADJUSTING LOAD-PROPORTIONAL BRAKING SYSTEM AND AUTOMATIC 'EMPTY-LOADED' CONTROL DEVICE |
| UIC 540 : 6ED 2014 | BRAKES - AIR BRAKES FOR FREIGHT TRAINS AND PASSENGER TRAINS |
| EN 14535-3:2015 | Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification |
| EN 16334:2014 | Railway applications - Passenger Alarm System - System requirements |
| EN 15734-2:2010/AC:2012 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 2: TEST METHODS |
| EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
| UIC 542 : 7ED 2015 | BRAKE PARTS - INTERCHANGEABILITY |
| CEN/TR 16251:2016 | Railway applications - Environmental conditions - Design guidance for rolling stock |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| UIC 541-06 : 2ED 2013 | BRAKES - REGULATIONS CONCERNING THE CONSTRUCTION OF THE VARIOUS BRAKE COMPONENTS: MAGNETIC BRAKES |
| EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| EN 15663:2017 | Railway applications - Vehicle reference masses |
| EN 15625:2008+A1:2010 | Railway applications - Braking - Automatic variable load sensing devices |
| PREN 16186-2 : DRAFT 2015 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| EN 16241:2014+A1:2016 | Railway applications - Slack adjuster |
| EN 837-1:1996/AC:1998 | PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| UIC 535-3 : 1976 REPRINT 1995 | EQUIPPING OF WAGONS WITH DEVICES FOR PASSING FROM ONE TO THE OTHER AND WITH SCREW BRAKES |
| EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| UIC 541-1 : 8ED 2013 | BRAKES - REGULATIONS CONCERNING THE DESIGN OF BRAKE COMPONENTS |
| UIC 541-05 : 3ED 2016 | BRAKES - MANUFACTURING SPECIFICATIONS FOR VARIOUS BRAKE PARTS - WHEEL SLIDE PROTECTION DEVICE (WSP) |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| EN 15355:2008+A1:2010 | Railway applications - Braking - Distributor valves and distributor-isolating devices |
| EN 16185-1:2014 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
| UIC 544-1 : 6ED 2014 | BRAKES - BRAKING PERFORMANCE |
$379.52
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.