ISO 75-1:2013
|
Plastics Determination of temperature of deflection under load Part 1: General test method
|
ISO 6721-2:2008
|
Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method
|
DVS 2212-2:1992-05
|
Examination of plastic welders - Examination group II - Hot gas extrusion welding
|
ISO 813:2016
|
Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
|
EN 228:2012+A1:2017
|
Automotive fuels - Unleaded petrol - Requirements and test methods
|
DIN IEC 60093 : 1993
|
METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
|
EN 14879-1:2005
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
|
DVS 2212-1:2015-12
|
Qualifi cation testing of plastics welders - Qualification Test Groups I and II
|
EN ISO 6721-2:2008
|
Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008)
|
EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
|
ISO 23529:2016
|
Rubber General procedures for preparing and conditioning test pieces for physical test methods
|
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
|
EN 977:1997
|
Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids
|
EN ISO 75-1:2013
|
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
DIN IEC 60167 : 1993
|
METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; INSULATION RESISTANCE OF SOLID MATERIALS
|
PREN 14879-6 : DRAFT 2009
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
|
ISO 846:1997
|
Plastics Evaluation of the action of microorganisms
|
EN ISO 22088-4:2006
|
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
|
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials
|
ISO 15013:2007
|
Plastics Extruded sheets of polypropylene (PP) Requirements and test methods
|
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
|
EN ISO 14632 : 1998
|
EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS
|
ISO 14632:1998
|
Extruded sheets of polyethylene (PE-HD) Requirements and test methods
|
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
|
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
|
EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
EN ISO 846 : 1997
|
PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS
|
ISO 22088-4:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method
|
EN 13067:2012
|
Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
ISO 554:1976
|
Standard atmospheres for conditioning and/or testing — Specifications
|
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
|
EN ISO 15013:2007
|
Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)
|
EN ISO 1133:2005
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
|
EN 1766:2017
|
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
|
ISO 527-3:1995
|
Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
EN ISO 527-3:1995/AC:2002
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
|
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
|
EN ISO 1183-1:2012
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
|
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
|
EN 13813:2002
|
Screed material and floor screeds - Screed material - Properties and requirements
|
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
ASTM D 1693 : 2015 : REDLINE
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
|