Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN 15381 E : 2008

Current
Current

The latest, up-to-date edition.

GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2008

National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
  3.1 Terms and definitions
  3.2 Abbreviations
4 Required characteristics and corresponding test methods
  4.1 General
  4.2 Characteristics relevant to specific conditions
      of use
      4.2.1 General
      4.2.2 Alkaline resistance
      4.2.3 Melting point
      4.2.4 Resistance to weathering
5 Evaluation of conformity
  5.1 General
  5.2 Verification of values
  5.3 Initial type tests
  5.4 Factory production control
  5.5 Inspection
6 Marking
Annex A (normative) - Factory production control
      A.1 Items to be addressed in a factory production
          control system
          A.1.1 General
          A.1.2 Product design
          A.1.3 Production
          A.1.4 Finished products
          A.1.5 Applicable to A.1.2, A1.3 and A.1.4 (to
                be used where appropriate)
      A.2 Checklist for the assessment of a factory
          production control system
          A.2.1 General
          A.2.2 Checklist
Annex B (normative) - Durability aspects
      B.1 Weathering
      B.2 Alkaline resistance
      B.3 Corrosion resistance
Annex C (normative) - Test method for the determination
        of the bitumen retention in paving fabrics used
        in pavements and asphalt overlays
      C.0 Introduction
      C.1 Scope
      C.2 Test specimens
          C.2.1 Handling
          C.2.2 Selection
          C.2.3 Number and dimensions
          C.2.4 Condition of specimens
      C.3 Testing procedure
      C.4 Test report
Annex D (normative) - Tensile test on steel wire mesh
Annex ZA (informative) - Clauses of this European
         Standard addressing the provisions of the
         EU Construction Products Directive
      ZA.1 Scope and relevant characteristics
      ZA.2 Procedure for the attestation of conformity
           of geotextiles and geotextile-related products
           used in pavements and asphalt overlays
           ZA.2.1 Systems of attestation of conformity
           ZA.2.2 Certificate and declaration of
                  conformity
      ZA.3 CE-marking and labelling
Bibliography

Describes the relevant characteristics of metallic and non-metallic geotextiles and geotextile-related products used in the construction of pavements and asphalt overlays and the appropriate test methods to determine these characteristics.

DocumentType
Standard
Pages
38
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

Standards Relationship
EN 15381:2008 Identical

EN ISO 13433:2006 Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)
EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 12226:2012 Geosynthetics - General tests for evaluation following durability testing
EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)
EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
CR ISO 13434:1998 GUIDELINES ON DURABILITY OF GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS
ISO 10320:1999 Geotextiles and geotextile-related products Identification on site
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
ISO 12236:2006 Geosynthetics — Static puncture test (CBR test)
EN 14030:2001/A1:2003 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS
EN 10244-2:2009 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
ISO 10319:2015 Geosynthetics — Wide-width tensile test
EN ISO 3146:2000/AC:2003 PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS
EN 12224 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
EN ISO 10318 : 2005 GEOSYNTHETICS - TERMS AND DEFINITIONS
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
ISO 9862:2005 Geosynthetics — Sampling and preparation of test specimens
EN ISO 10320:1999 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE
ISO 13433:2006 Geosynthetics — Dynamic perforation test (cone drop test)
EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
EN ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010)
EN ISO 13431:1999 Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO/TR 12960:1998 Geotextiles and geotextile-related products Screening test method for determining the resistance to liquids
ISO 3146:2000 Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
ISO 9001:2015 Quality management systems — Requirements
ISO 10318:2005 Geosynthetics Terms and definitions
AASHTO M 288 : 2015 SPECIFICATION FOR GEOSYNTHETIC SPECIFICATION FOR HIGHWAY APPLICATIONS
EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens
EN ISO 12236:2006 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
ISO 13431:1999 Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric
ISO 9864:2005 Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products
EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)

View more information
$202.09
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more